The Transactions of the Korean Institute of Electrical Engineers P (전기학회논문지P)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

Performance Comparison Analysis for Interconnected Wind Power Generator using Computer Simulation and Real-Size Hardware Simulator

컴퓨터시뮬레이션과 실용량 하드웨어시뮬레이터를 이용한 계통연계 풍력발전의 성능비교분석

  • 윤동진 (명지대학교 대학원 전기공학과) ;
  • 오승진 (명지대학교 대학원 전기공학과) ;
  • 한병문 (명지대학교 전기공학과) ;
  • 정병창 (LS산전 중앙연구소) ;
  • 정용호 (LS산전 중앙연구소) ;
  • 최영도 (한전 전력연구원 전력계통연구소) ;
  • 전영수 (한전 전력연구원 송배전연구소)
  • Published : 2009.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper describes comparative analysis results about the dynamic interaction of interconnected wind power system using the actual-size hardware simulator and the simulation model with PSCAD/EMTDC. The hardware simulator, which is composed of 2.0MVA induction motor with drive system and 1.5MW doubly-fed induction generator, was built and tested in Go-Chang Test Site of KEPCO for analyzing the dynamic interaction with the interconnected distribution system. The operation of hardware simulator was verified through comparative analysis between experimental results and simulation results obtained by simulation model with PSCAD/EMTDC. The developed hardware simulator and simulation model could be effectively used for analyzing the dynamic interaction, which has various phenomena depending on the wind variation and the network state of interconnected power system.

Keywords

References

  1. 국가에너지 기본계획(안), 지식경제부& 에너지경제연구원, 2008
  2. IEEE1547. IEEE Standard for Interconnecting Distributed Resources with Electric Power System. 2003
  3. 김슬기, 김응상"계통연계형 가변속 풍력발전방식의 PSCAD/EMTDC모의 및 해석", 대한전기학회논문지, 52B권 8호, pp.413-419, 2003년 8월
  4. 김정재, 송승호 "영구자석형 동기기에 의한 가변속 풍력발전 시스템의 PSCAD/EMTDC 시뮬레이션 모델 개발", 전력학회지 Vol.10 No.6, pp610-617, 2005년 12월