Three Dimensional Ultrasonographic Evaluation with Intra-articular Saline Injection in Rotator Cuff Tear

회전근 개 파열의 수술 전 3차원 초음파 검사에서 관절내 생리식염수 주사 후 검사의 정확도

  • Yum, Jae-Kwang (Department of Orthopedic Surgery, Sang-Gye Paik Hospital) ;
  • Shin, Yong-Woon (Department of Orthopedic Surgery, Sang-Gye Paik Hospital) ;
  • Park, Shin-Seung (Department of Orthopedic Surgery, Sang-Gye Paik Hospital)
  • 염재광 (인제대학교 의과대학 상계백병원 정형외과) ;
  • 신용운 (인제대학교 의과대학 상계백병원 정형외과) ;
  • 박신승 (인제대학교 의과대학 상계백병원 정형외과)
  • Published : 2009.09.30

Abstract

Purpose: The purpose of this study is to find out the accuracy and usability of the three dimensional ultrasonography in measuring the size of the rotator cuff tear, especially before and after the injection of normal saline into the glenohumeral joint. Materials and Methods: 14 patients of rotator cuff tear who were diagnosed and operated from August 2007 to September 2008 were included in this study and authors compared the size of rotator cuff tear measured with three dimensional ultrasonography with the real size measured intraoperatively. In preoperative ultrasonographic evaluation, horizontal and longitudinal length of rotator cuff tear before and after injection of normal saline intraarticularly. During the arthroscopic operation the size of tear was measured by passing a Kirschner wire through a spinal needle and direct measure was performed in open surgery. Results: The average difference was 8 mm in horizontal and 1.9 mm in longitudinal length of tear without saline injection between ultrasonographic and intraoperative measure. The average difference was 4.1 mm in horizontal and 1.6 mm in longitudinal length of tear after the normal saline injection. Conclusion: In three dimensional ultrasonographic evaluation in rotator cuff tear, intraarticular normal saline injection would produce more accurate results.

목적: 회전근 개 파열이 있는 환자들에서 3차원 초음파 검사를 시행할 때 생리식염수 20 ml를 견관절강 내에 주사 하기 전과 후의 파열 길이 측정과 수술시 측정과의 차이를 비교 분석하여 초음파 검사시 생리식염수의 관절내 주사가 파열의 길이 측정에 더 유용한 방법인지 확인하고자 하였다. 대상 및 방법: 2007년 8월부터 2008년 9월까지 회전근 개 파열을 진단받고 수술 받은 환자 14명에 대하여 수술 전 3차원 초음파를 이용하여 측정한 회전근 개 파열의 크기와 실제 수술 중에 측정한 파열의 크기를 비교 분석하였다. 3차원 초음파를 이용한 회전근 개 파열의 측정은 관절강 내에 20 ml의 생리식염수를 주사 하기 전, 후로 파열된 회전근 개의 너비와 내측으로의 이동 정도를 측정하였으며, 관절경 수술시에는 Kirschner 강선을 척수 바늘에 통과시키는 방법으로 파열의 길이를 측정하였고 개방적 수술시에는 자를 가지고 직접 측정하였다. 결과: 3차원 초음파 검사시 생리식염수를 주사하기 전 측정한 크기와 실제 파열된 크기를 비교하였을 때 파열의 너비의 차이는 실제 크기보다 평균 8 mm 작게 측정되었고 내측으로의 이동 정도는 평균 1.9 mm 작게 측정되었다. 생리식염수 주사 후에 측정한 결과는 초음파 검사에서 실제 크기보다 평균 4.1 mm 작게 측정되고, 내측으로의 이동의 정도는 평균 1.6 mm 크게 측정되었다. 결론: 3차원 초음파를 이용한 회전근 개 파열의 진단에서 보다 정확한 크기를 측정하기 위하여 관절강 내에 생리 식염수를 주사한 후 검사하면 보다 정확하고 실제 크기와 유사한 측정이 가능할 것으로 사료된다.

Keywords