Developing an ISO 44649-based e-CAM System Supporting Multi-channel e-CNC for Composite Machine Tools

다계통 e-CNC 용 국제표준 모델 기반 e-CAM 구축 기술

  • Shin, Seung-Jun (Center for u-Manufacturing, Department of Industrial & Management, POSTECH) ;
  • Um, Ju-Myung (Center for u-Manufacturing, Department of Industrial & Management, POSTECH) ;
  • Yoon, Joo-Sung (Center for u-Manufacturing, Department of Industrial & Management, POSTECH) ;
  • Jeong, Su-Ho (Center for u-Manufacturing, Department of Industrial & Management, POSTECH) ;
  • Cha, Jae-Min (Center for u-Manufacturing, Department of Industrial & Management, POSTECH) ;
  • Suh, Suk-Hwan (Center for u-Manufacturing, Department of Industrial & Management, POSTECH) ;
  • Ha, Kyeong-Tak (Realtimewave Co., Ltd) ;
  • Chung, Dae-Hyuk (Machine Tools R&D Center, Doosan Infracore Co., Ltd)
  • 신승준 (포항공과대학교 산업경영학과 u-Manufacturing 연구센터) ;
  • 엄주명 (포항공과대학교 산업경영학과 u-Manufacturing 연구센터) ;
  • 윤주성 (포항공과대학교 산업경영학과 u-Manufacturing 연구센터) ;
  • 정수호 (포항공과대학교 산업경영학과 u-Manufacturing 연구센터) ;
  • 차재민 (포항공과대학교 산업경영학과 u-Manufacturing 연구센터) ;
  • 서석환 (포항공과대학교 산업경영학과 u-Manufacturing 연구센터) ;
  • 하경탁 ((주)리얼타임웨이브) ;
  • 정대혁 (두산인프라코어(주) 공작기계 연구센터)
  • Published : 2009.04.01

Abstract

Keywords

References

  1. Planit Inc., http://www.edgecam.com
  2. CNC Software Inc., http://www.mastercam.com
  3. FANUC Ltd., "FANUC manual guide I-operator’s manual," FANUC Ltd, 2002
  4. Suh, S. H., Lee, J. J., Cho, J. H., Shin, Y. S., Kang, D. H., Kim, S. K., Kim, T. I. and Song, J. I., "Developing Automatic Programming System for High Performance CNC Machining Centers," Proc. of IEEK, Vol. 1, pp. 13-17, 1994
  5. Chung, D. H. and Suh, S. H., "ISO14649-based nonlinear process planning implementation for complex machining," Computer-Aided Design, Vol. 40, No. 5, pp. 521-536, 2008 https://doi.org/10.1016/j.cad.2008.01.009
  6. STEP Tools, Inc., http://www.steptools.com
  7. Lee, B. E., Chung, D. H. and Suh, S. H., "Turning STEP-NC Paradigm and Delta Volume Decomposition," Proc. of KORMS & KIIE Joint Conference, pp. 217-224, 2003
  8. Yip-Hoi, D. and Dutta, D., "Finding the maximum turnable state for mill/turn parts," Computer-Aided Design, Vol. 29, No. 12, pp. 879-894, 1997 https://doi.org/10.1016/S0010-4485(97)00043-2