DOI QR코드

DOI QR Code

LPG액상분사식(LPLi) 엔진에서 연료와 연료공급계통 고무류 부품사이의 반응성 연구

Reaction Characteristics of LPG Fuel and Rubber Parts of Fuel Supply System in Liquid Phase LPG Injection (LPLi) System

  • 김창업 (한국기계연구원 그린동력연구실) ;
  • 박철웅 (한국기계연구원 그린동력연구실) ;
  • 강건용 (한국기계연구원 그린동력연구실)
  • 발행 : 2009.04.01

초록

The liquid phase LPG injection (LPLi) system (the 3rd generation technology) has been considered as one of the most promising fuel supply systems for LPG vehicles. To investigate the reaction characteristics of LPG with rubber parts in LPLi system, various rubbers were tested. The results showed that the amount of residue from the cover rubber of a fuel pump was increased about 10 times after testing. Furthermore, the amount of sulfur and nitrogen species which are considered as main sources of deposit formation in LPLi fuel injectors were also found to be higher than those in original LPG fuel. In addition, these residues made the core parts of LPLi injector such as needle and nozzle, partially worn, which eventually causes leakage in LPLi injectors.

키워드

참고문헌

  1. WORLD LP GAS ASSOCIATION, 2006, 'Automotive LP Gas, Today's Fuel for a Cleaner Tomorrow.'
  2. Bas H., L. Conti and de Kok, P. 1995, 'Propane the 'Clean' Fuel as the Next Century for Light and Heavy Duty Vehicles,' TNO-Paper VM9504
  3. Changup K., Daeyup L., Seungmook O., Kernyong K., Hoimyung C. and Kyoungdoug M., 2002, 'Enhancing Performance and Combustion of an LPG MPI Engine for Heavy Duty Vehicles,' SAE 2002 International Congress and Exposition, 2002-01-0449
  4. Seungmook O., Seungyu K., Choongsik B., Changup K., Kernyong K. 2002, 'Flame Propagation Characteristics in a Heavy-Duty LPG Engine with Liquid Phase Port Injection,' SAE International 2002 Spring Fuels and Lubricants Meeting and Exposition, 2002-01-1736
  5. Wooseok K., Jungcheol P., Simsoo P., Jaisuk Y., Jonghwa L., 2003, 'A Study on the Development of Icing by Injection of LPG in the Liquid Phase Around Injector (I),' Transaction of KSAE, Vol. 11, No. 1, pp.87-94
  6. Kernyong K., Daeyup L., Seungmook O., Changup K., 2001, 'A Fundamental Study on a MPI LPG Engine for Heavy Duty Vehicles,' SAE 2001-02-1958
  7. Changup K., Seungmook O., Kernyong K., 2004, 'Durability Properties of Liquid Phase LPG Injection System with Various Qualities of LPG Fuels,' KSAE Vol.12, No.5
  8. Changup K., Cheolwoong P., Kyonam C. and Kernyong K., 2007, 'Reaction Characteristics of Rubbers and LPG fuels in LPLi Fuel Supply System,' Journal of ILASS-KOREA, Vol.12, No.2

피인용 문헌

  1. Lubrication characteristics of spiral groove liquid seals for use in the carrier of a vane-type external LPG fuel pump vol.12, pp.2, 2011, https://doi.org/10.1007/s12239-011-0028-6