Abstract
LiDAR has capability of rapid data acquisition and provides useful information for reconstructing surface of the Earth. However, Extracting information from LiDAR data is not easy task because LiDAR data consist of irregularly distributed point clouds of 3D coordinates and lack of semantic and visual information. This thesis proposed methods for automatic extraction of buildings and 3D detail modeling using airborne LiDAR data. As for preprocessing, noise and unnecessary data were removed by iterative surface fitting and then classification of ground and non-ground data was performed by analyzing histogram. Footprints of the buildings were extracted by tracing points on the building boundaries. The refined footprints were obtained by regularization based on the building hypothesis. The accuracy of building footprints were evaluated by comparing with 1:1,000 digital vector maps. The horizontal RMSE was 0.56m for test areas. Finally, a method of 3D modeling of roof superstructure was developed. Statistical and geometric information of the LiDAR data on building roof were analyzed to segment data and to determine roof shape. The superstructures on the roof were modeled by 3D analytical functions that were derived by least square method. The accuracy of the 3D modeling was estimated using simulation data. The RMSEs were 0.91m, 1.43m, 1.85m and 1.97m for flat, sloped, arch and dome shapes, respectively. The methods developed in study show that the automation of 3D building modeling process was effectively performed.
LiDAR는 광범위한 지역의 지형 지물 및 지표면에 대한 3차원 좌표를 신속하게 획득할 수 있는 장비로 고정밀의 3차원 공간데이터를 제공하는 장점이 있다. 그러나 LiDAR 데이터는 불규칙한 3차원 점 데이터로 구성되어 있으므로, 의미적이고 시각적인 정보를 제공하지 않으며, LiDAR 데이터만을 사용하여 정보를 추출하는 것은 어렵다. 본 연구에서는 항공 LiDAR 데이터로부터 건물의 외곽선 자동 추출 및 3차원 상세 모델링을 위한 방법을 제안하였다. 전처리 과정으로 반복적 평면 fiitting을 통하여 노이즈 및 불필요한 데이터를 제거하고, 히스토그램 분석을 수행하여 지면과 비지면 데이터를 효과적으로 분리하였다. 건물 외곽선을 추출하기 위해서 객체추적 기법을 이용하여 건물의 외곽에 해당하는 LiDAR 점들을 분류하였으며, 선행과정을 통해 LiDAR 데이터로부터 최종적으로 건물의 외곽선을 추출하였다. 정확도 검증을 위해 추출된 건물의 외곽선을 1:1,000 수치지도와 비교한 결과, 실험지역의 평면 RMSE가 약 0.56m였다. 또한, 건물의 상부구조물의 형태를 재현하기 위한 특성정보 추출 방법을 제안하였다. 지붕면을 세부적으로 분할하고 모델링하기 위하여 통계적 및 기하적 특성정보를 이용하였으며, 각각의 상부구조물에 적합한 수학적 함수를 최소제곱법에 의해 결정함으로써 3차원 모델링이 가능하도록 하였다. 상부구조물 모델링 결과 각 형태에 따른 RMSE가 사각형 상부구조물은 0.91m, 삼각형 상부구조물은 1.43m, 아치형 상부구조물은 1.85m, 돔형 상부구조물이 1.97m였다. 이는 원시 LiDAR 데이터로부터 지붕면 분할 및 3차원 자동 모델링이 효과적으로 수행되었음을 보여주고 있다.