참고문헌
- Makino, H. and Ohde, T., "Motion Control of the Direct Drive Actuator," Annals of the CIRP, Vol. 40, No.1, pp. 375-387, 1991 https://doi.org/10.1016/S0007-8506(07)62010-1
- Ono, Y. and Kuwahara, H., "The New Design of Motor, Position Sensor and Position Control System for Direct Drive Manipulators," Proceedings of the ASME, Robotics: Theory and Applications, pp. 123- 128, 1986
- Pritschow, G. and Philipp, W., "Direct Drives for High-Dynamic Machine Tool Axes," Annals of the CIRP, Vol. 39, No. I, pp. 413-416,1990 https://doi.org/10.1016/S0007-8506(07)61085-3
- Schepper, F. and Yamazaki, K., "Development of an ASIC Performing High Speed Current Loop Processing of Servo Motor Control for Mechatronics Applications," Annals of the CIRP, Vol. 38, No.1, pp. 355-358, 1989 https://doi.org/10.1016/S0007-8506(07)62722-X
- Koren, Y., "Cross-Coupled Biaxial Computer Control for Manufacturing Systems," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 102, No.4, pp. 265-272, 1980 https://doi.org/10.1115/1.3149612
- Kulkarni, P. K. and Srinivasan, K., "Optimal Contouring Control of Multi-Axial Feed Drive Servomechanisms," ASME Journal of Engineering for Industry, Vol. 111, No.2, pp. 140-148, 1989 https://doi.org/10.1115/1.3188743
- Kulkarni, P. K. and Srinivasan, K., "Cross-Coupled Control of Biaxial Feed Drive Servomechanisms," ASME Journal of Dynamic Systems, Measurement, and Control, Vol. 112, No.4, pp. 225-232, 1990
- Koren, Y. and Lo, C. C., "Variable-Gain CrossCoupling Controller for Contouring," Annals of the CIRP, Vol. 40, No.1, pp. 371-374,1991 https://doi.org/10.1016/S0007-8506(07)62009-5
- Koren, Y. and Lo, C. c., "Advanced Controllers for Feed Drives," Annals of the CIRP, Vol. 41, No.2, pp. 689-698, 1992 https://doi.org/10.1016/S0007-8506(07)63255-7
- Lee, Y. and Jee, S., "Adaptive Cross-Coupling Control for High-Speed Nonlinear Contour Machining," Journal ofthe KSPE, Vol. 17, No. 11, pp. 108-114,2000
- Jee, S. and Koo, T., "3-Axis Coupling Controller for High-PrecisionlHigh-Speed Contour Machining," Transactions of the KSME(A), Vol. 28, No.1, pp. 40- 47,2004
- Jee, S. and Lee, H., "Integrated Controller Design for Multi-Axis CNC Systems," Journal of the KSPE, Vol. 23, No.5, pp. 93-102, 2006
- Ziegler, J. G and Nichols, N. B., "Optimum Settings for Automatic Controllers," Transactions of the ASME, Vol. 64, pp. 759-768, 1942
- Astrom, K. and Hagglund, T., "Automatic Tuning of Simple Regulators with Specifications on Phase and Amplitude Margins," Automatica, Vol. 20, No.5, pp. 645-651, 1984 https://doi.org/10.1016/0005-1098(84)90014-1
- Astrom, K. and Hagglund, T., "PID Controllers: Theory, Design, and Tuning," Instrument Society of America, 1995
- Yu, C. C., "Autotuning of PID Controllers: Relay Feedback Approach, " Springer-Verlag, 1999
- Ljung, L., "System Identification Toolbox for Use with MATLAB: User's Guide," The Mathworks, Inc., 1993
- Levenberg, K., "A Method for the Solution of Certain Non-Linear Problems in Least Squares," The Quarterly of Applied Mathematics, Vol. 2, No.2, pp. 164-168,1944
- Marquardt, D., "An Algorithm for Least-Squares Estimation of Nonlinear Parameters," SIAM Journal on Applied Mathematics, Vol. II, No.2, pp. 431-441, 1963 https://doi.org/10.1137/0111030
- Savitzky, A. and Golay, M. J. E., "Smoothing and Differentiation of Data by Simplified Least Squares Procedures," Analytical Chemistry, Vol. 36, No.8, pp. 1627-1639,1964 https://doi.org/10.1021/ac60214a047