한국방재학회 논문집 (Journal of the Korean Society of Hazard Mitigation)

  • 제9권1호
  • /
  • Pages.9-13
  • /
  • 2009
  • /
  • 1738-2424(pISSN)
  • /
  • 2287-6723(eISSN)
한국방재학회 (Korean Society of Hazard Mitigation)
권호 표지

Computer Aided Teaching of Structural Engineering Using Adaptive Schemes in the Finite Element Method

  • 발행 : 2009.02.28
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구는 적응적 요소망을 사용한 유한요소법으로 해석된 2차원 문제를 전산을 활용한 구조공학 교육의 중요한 부분으로 활용하는 대요를 제시한다. 적응적 요소망 형성방법에서는 비교적 간단한 요소의 대표 변형률 값을 사용하였고 유한요소법으로는 광범위하게 활용되고 있는 변위법을 사용하였다. 적용한 예제는 기본 역학의 대표적인 문제인 집중 하중을 받는 캔틸레버보와 중앙에 원형 구멍을 갖은 평판 인장 문제이다. 교육 대요와 예제는 적응적 요소망을 사용한 유한요소법이 전산을 활용한 구조공학 교육에 중요한 부분이 될 수 있는 것을 보여준다.

A simple outline for teaching adaptive scheme based finite element method for planar problems as a part of computer aided teaching of structural engineering curriculum is presented. Displacement based finite element formulation for planar problems and representative strain value based adaptive scheme for mesh generation are considered. As examples, a cantilever beam with a concentrated load treated as a planar problem and stretching of a plate with a circular hole are analyzed with displacement based finite element method with adaptive meshes. The examples and outlines show how adaptive based finite element method may become an essential part of computer aided teaching of structural engineering.

키워드

참고문헌

  1. Belytschko, T., Hughes, J.R. and Bathe, K.J. (1996) Finite Element Procedures. Prentice-Hall, Englewood Cliffs
  2. Biggs, J.B. (1999) Teaching for Quality Learning at University. Open University Press, Buckingham, U.K.
  3. Choi, C.K., and Yu, W.J. (1998) Adaptive finite element wind analysis with mesh refinement and recovery (in Korean). Wind and Structures, Vol. 1, pp. 111-125 https://doi.org/10.12989/was.1998.1.1.111
  4. de Las Casas, E.B. (1988) R-H Mesh Improvement Algorithms for the Finite Element Method, Ph.D. Dissertation, Department of Civil Eng., Purdue University, West Lafayette
  5. Gere, J.M. (2001) Mechanics of Materials. Brooks/Cole, Pacific Grove, 2nd Ed.
  6. Heesom, D., Mahdjoubi, L. (2001) Effect of grid resolution and terrain characteristics on data from DTM. J. Computing in Civil Eng., ASCE, Vol. 15, No. 2, pp. 137-143 https://doi.org/10.1061/(ASCE)0887-3801(2001)15:2(137)
  7. Jeong, Y.C., and Yoon, C. (2003) Representative strain value based adaptive mesh generation for plane stress. Hongik Journal of Science and Technology, Vol. 7, pp. 71-86
  8. Jeong, Y.C., Yoon, C., and Hong, S. (2003) Adaptive mesh generation scheme for planar problems using representative strain values for error (in Korean). Proc., Korean Society of Computational Structural Eng., Vol. 16, No. 2-31, pp. 403-409, Fall
  9. Ladeveze, P., and Oden, J.T., editors. (1998) Advances in Adaptive Computational Methods in mechanics Studies in Applied Mechanics 47, Elsevier, Oxford
  10. Logan, D. (1992) A First Course in the Finite Element Method. PWS Publishing Company, Boston, 2nd Ed.
  11. MacLeod, I.A. (2002) The education of structural analyst. Proc., Asranet Symp., Asranet, Dept. of Naval Architecture and Marine Eng., Univ. of Glasgow and Strathclyde, London
  12. McFee, S., and Giannacopoulos, D. (2001) Optimal discretizations in adaptive finite element electromagnetics. Int. J. Numer. Meth. Eng., Vol. 52, No. 9, pp. 939-978 https://doi.org/10.1002/nme.240
  13. Norris, C.H., Wilber, J.B., and Utku, S. (1991) Elementary Structural Analysis. McGraw-Hill, New York, 4th Ed.
  14. Ohnimus, S., Stein, E., and Walhorn, E. (2001) Local error estimates of FEM for displacements and stresses in linear elasticity by solving local Neumann problems. Int. J. Numer. Meth. Eng., Vol. 52, No. 7, pp. 727-746 https://doi.org/10.1002/nme.228
  15. Rafiq, M.Y., and Easterbrook, D.J. (2005) Using the computer to develop a better understanding in teaching structural engineering behavior to undergraduates. J. Computing in Civil Eng., Vol. 19, No. 1 pp. 34-44 https://doi.org/10.1061/(ASCE)0887-3801(2005)19:1(34)
  16. Timoshenko, S.P., and Goodier, J.N. (1970) Theory of Elasticity. McGraw-Hill, New York, 3rd Ed.
  17. Yoon, C., and Jeong, Y.C. (2005) Adaptive mesh generation for dynamic finite element analysis (in Korean). J. of the Korean Society of Civil Eng., Vol. 25, No. 6A, pp. 989-998
  18. Zhu, J.Z., Zienkiewicz, O.C., Hinton, E., and Wu, J. (1991) A new approach to the development of automatic quadrilateral mesh generation. Int. J. Numer. Meth. Eng., Vol. 32, pp. 849-866 https://doi.org/10.1002/nme.1620320411
  19. Zienkiewicz, O.C., Taylor, R.L, and Zhu, J.Z. (2005) The Finite Element Method: Its Basis and Fundamentals. Elsevier Butterworth-Heinemann, Oxford, 6th Ed.
  20. Zienkiewcz, O.C., and Zhu, J.Z. (1987) A simple error estimator and adaptive procedure for practical engineering analysis. Int. J. Numer. Meth. Eng., Vol. 24, pp. 337-357 https://doi.org/10.1002/nme.1620240206