References
- Ki-Joung Kim, Jin-Woo Kim, Youn-Bae Kang, Sang-Myung Cho : Heat transfer simulation and temperature measurement for heat input control in orbital welding, Journal of KWS, 21-1 (2003), 115-158 (in Korean)
- Jin-Woo Kim, Sang-Myung Cho : The effect of the arc pressure variation on the penetration by the filler wire feed rate in pulsed TIG welding, Journal of KWS, 22-1 (2004), 169-171 (in Korean)
- 김기정, 김진우, 강윤배, 조상명 : 스테인리스강과 연강 파이프의 자동 원주 GTA용접의 입열량 제어, 대한기계학회, 대한기계학회 기타 간행물 2002년도 기계관련 산학연 연합심포지엄 강연 및 논문 초록집, 2002. 11, 2881-2885 (in Korean)
- J. K. Martikainen and T. J. I Moisio : Investigation of the effect of welding parameters on weld quality of plasma arc keyhole welding of structural steels, Welding Research Supplement, 1993, 329s-340s
- Y. M. Zhang and S. B. Zhang : Observation of the keyhole during plasma arc welding, Welding Research Supplement, 1999, 53s-58s
- J. K. Martikainen : Conditions for achieving highquality in the plasma-arc keyhole welding of structural steels, Journal of Materials Processing Technology 52, (1995), 68-75 https://doi.org/10.1016/0924-0136(94)01444-6
- Y. F. Hsu and B. Rubinsky : Two dimensional heat transfer study on the keyhole plasma arc welding prdcess, Journal of Heat and Mass Transfer, Vol. 31 (1988), 1409-1421 https://doi.org/10.1016/0017-9310(88)90250-5
-
대한용접학회편 : 용접
${\cdot}$ 접합 편람, 대한용접학회, 1998, 545-546 (in Korean) - 김대주, 김경주, 백성호 : 루트갭과 단차에 의한 플라즈마 아크 용접성에 관한 연구, 대한용접학회 추계학술발표대회 개요집 제 45권, 2005. 11 (in Korean)
- J. C. Metcalfe and M. B. C. Quigley : Keyhole stability in plasma arc welding, Welding Journal, 1975, 401s-404s
- Welding handbook chapter 10, Plasma arc welding, 331-333
- T. Anzai : Automatic TIG Welding for high purity stainless steel pipework, Welding International, 8-1, (1994), 70-73 https://doi.org/10.1080/09507119409548549
- Z. Sun, M. Kuo, I. Annergren, D. Pan : Effect of dual torch technique on duplex stainless steel welds, Materials Science and Engineering A356, 2003, 274-282
- In-Tae Kim : Development of middle-thick butt welding process by plasma-MAG tandem welding, Master dissertation in Pukyong graduate school, 2006, 36-39 (in Korean)
- 이레테크 : 새 Minitab 실무완성, 2005, 391-396 (in Korean)
- Cohen, J. Statistical power analysis for the behavioral sciences (2nd ed.), 1988
Cited by
- A Study on Optimum Shape of Shield Gas Nozzle for Bead Shape Control in TIG Welding using Gas Force (Ⅰ) - Design and Performance Analysis of Venturi Nozzle - vol.29, pp.3, 2011, https://doi.org/10.5781/KWJS.2011.29.3.307
- A Study on Optimum Shape of Shield Gas Nozzle for Bead Shape Control in TIG Welding using Gas Force (II) - Effect of Molten Metal Control by Venturi Nozzle in Overhead Position - vol.29, pp.3, 2011, https://doi.org/10.5781/KWJS.2011.29.3.314