Abstract
A trial run of locally-developed tilting train has been in process on Chungbuk line since the test vehicle was first produced. For the system stabilization, interface verification among the systems including track, structure, catenary and signaling system, not to mention the rolling stock, is very crucial. Therefore, in this study, the dynamic rail force of the tilting (Hanvit 200), high-speed (KTX) and general (Mugunghwa) vehicle caused by driving in transition curve track was measured. And, it compared the tilting response with the other by using the measured rail force data in transition curve track, and then evaluated probability the range of load fluctuation for the variable dynamic vertical and lateral wheel load. As a result, a range of rail force by occurred a change of cant from the high-speed and general vehicle which had fixed bogie structure was distributed throughout small deviation. Otherwise, in case of the tilting train which was consisted of the pendulum bogie structure was distributed wide range about large deviation by changed of cant.
국내에서 개발된 한국형 틸팅열차는 현재 시제차량 제작을 마치고, 충북선을 시작으로 시운전 시험이 단계적으로 진행되고 있다. 시운전 시험에서는 한국형 틸팅열차의 시스템 안정화를 위해 차량 외에 궤도, 구조물, 전차선, 신호 등 각 시스템 상호간의 인터페이스 검증이 필요하며, 선로구축물 분야에서는 개발차량의 증속이 궤도구조에 미치는 영향을 비롯한 궤도부담력 검토를 통해 궤도구조의 안정성과 주행안정성 평가가 수행되어야 한다. 따라서 본 연구에 서는 완화곡선구간을 주행하는 틸팅차량(한빛200호), 고속차량(KTX) 및 일반차량(무궁화)에 의해 궤도에서 발생하는 동적 윤중 및 횡압을 측정하였다. 측정데이터를 통해 차종별 주행패턴을 비교하고 윤중과 횡압의 증감율을 확률적으로 분석하였다. 분석결과, 고정식 대치구조를 갖는 기존 차량의 캔트변화에 따른 발생 윤중 및 횡압의 분포범위는 일정 범위 내에서 작은 편차로 분포하였다. 반면 진자식 대차구조인 틸팅차량의 경우 캔트변화에 따른 차체의 틸팅작용에 의해 비교적 넓은 범위에 큰 편차로 궤도작용력이 분포하는 것으로 나타났다.