Journal of the Korean Institute of Illuminating and Electrical Installation Engineers (조명전기설비학회논문지)

The Korean Institute of IIIuminating and Electrical Installation Engineers (한국조명전기설비학회)
권호 표지
DOI QR코드

DOI QR Code

Surface Discharge Characteristics for Epoxy Resin in Dry-Air with Variations of Electrode Features and Epoxy Resin Size

Dry-Air 중의 전극 형상 및 에폭시수지의 크기변화에 따른 연면방전특성 연구

  • Published : 2009.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

This paper shows a basic data of the surface discharge characteristics for epoxy resin in Dry-Air as being focused on environmentally friendly insulating Gas. Used electrodes are needle to plane, sphere to plane and KS M3015 electrodes. With the changing electrodes in same condition, we can obtain different creeping lengths, surface discharge voltages and surface dielectric strengths, respectively. Surface dielectric strengths of Needle to plane electrodes are more higher than the others. Moreover, it is considered that the surface discharge characteristics with variation of epoxy resin thickness and diameter. Surface discharge voltage increases as the thickness and the diameter of epoxy resin.

본 논문은 친환경 절연재료인 Dry-Air 중 에폭시 수지의 연면절연특성을 구명하여 Dry-Air를 절연매체로 사용한 각종 절연설계 시에 응용 가능한 기초자료를 제공하고자 한다. 사용한 전극은 침 대 평판, 구 대 평판, KS M3015 전극으로써, 동일한 조건 하에서 전극의 종류에 따른 연면 절연 파괴 전압, 연면 거리, 연면방전 전계강도를 비교하였다. 연면전계강도는 침 대 평판 전극 하에서 가장 높게 나타났다. 또한 에폭시 수지의 두께와 지름을 변화시켰을 때의 연면 절연 특성은 에폭시 수지의 두께가 두꺼울수록, 지름이 길수록 연면 절연 파괴 전압이 높게 나타남을 확인하였다.

Keywords

References

  1. L.G. Christophorou, J.K. Olthoff and R.J. Van Brunt, "Sulfur Hexafluoride and the Electric Power Industry", IEEE Electrical Insulation Magazine, Vol. 13, No. 5, pp.20-24, September/October, 1997 https://doi.org/10.1109/57.620514
  2. L.G. Christophorou and R.J. Van Brunt, "SF6/N2 Mixtures Basic and HV Insulation Properties", IEEE Trans. on Dielectrics and Electrical Insulation, Vol.2, No.5, pp.952-1003, October 1995 https://doi.org/10.1109/94.469988
  3. Toshiaki Rokunohe, Yoshitaka Yagihashi, Kenji Aoyagi, Takashi Oomori and Rumihiro endo, "Development of SF6-Free 72.5 kV GIS", IEEE Trans. on Power Delivery, Vol.22, No.3, pp.1869-1876, July 2007 https://doi.org/10.1109/TPWRD.2007.899273
  4. Y.H. Do, E.H. Choi, C.U. Lee, K.S. Park, L.K. Kim, K.S. Lee, "Breakdown Characteristics Assess of Imitation-Air for Distribution Power Facilities", KIIEE, vol.22, No.2, pp.114-119, February 2008 https://doi.org/10.5207/JIEIE.2008.22.2.114
  5. S.K. Jung, D.C. Lee, "High voltage engineering", Munundang, pp.172-177, 1982
  6. H. Park, J.H. Lee, E.H. Choi, S.G. Park, K.S. Park, K.S. Lee, "Surface discharge Characteristics for epoxy resin in Dry-Air with different electrode features", KIIEE Autumn Annual Conf., pp.253-255, October 2008

Cited by

  1. Mixture Gas vol.24, pp.7, 2010, https://doi.org/10.5207/JIEIE.2010.24.7.041
  2. A Study on the Surface Discharge Characteristics by Dielectric Constant and Diameter of Solid Dielectrics to Improve Surface Dielectric Strength in Eco-Friendly Insulation Gas vol.27, pp.1, 2013, https://doi.org/10.5207/JIEIE.2013.27.1.085
  3. Analysis of Medium Effect by Gas Pressure and Gap at Surface Discharge of Dry Air vol.27, pp.10, 2013, https://doi.org/10.5207/JIEIE.2013.27.10.086
  4. A Study of Surface Discharge Characteristics for Dew-Point of Dry-Air and Materials or Shapes of Solid Insulator in Quasi-Uniform Field vol.27, pp.6, 2013, https://doi.org/10.5207/JIEIE.2013.27.6.044
  5. Breakdown Characteristics of Rod-Electrodes using Imitation Air vol.27, pp.8, 2013, https://doi.org/10.5207/JIEIE.2013.27.8.016
  6. Breakdown Characteristics According to the Type & Gap of Rod-electrodes Using Imitation Air vol.28, pp.2, 2014, https://doi.org/10.5207/JIEIE.2014.28.2.019