The Noise Reduction of Industrial Blower by Optimal Positioning of Buff

버프의 최적 위치를 통한 산업용 송풍기의 소음저감

  • 김창호 (동의대학교 기계공학과) ;
  • 손인수 (동의대학교 기계공학과) ;
  • 안태수 (동의대학교 대학원 기계공학과)
  • Received : 2009.03.11
  • Accepted : 2009.03.31
  • Published : 2009.03.30

Abstract

In a running blower, there are various exciting forces which can generate noise. The noise of an running industrial fan or blower depends on the structure of a fan, the machining accuracy of each element, and assembled conditions. Many studies have been carried out to reduce the noise of it. In this study, 3-hole buffs are used in pipe of blower to study the influence the number and position of buffs on the noise reduction at inlet and outlet in pipe. Commercial engineering software ANSYS and SYSNOISE were employed to analyze the characteristics and reduction ratio of pressure. It is concluded that optimal position and number of buffs in pipe of blower to show the least reduction ratio of pressure.

Keywords

References

  1. Fuller, C. R., Elliott, S. J. and Nelson, P. A., Active Control of Vibration, Academic Press, 1996.
  2. Chung, Y. D. and Lee, S. K., "Working Environment Noise Reduction of Industrial Blower due to Enclosures," J. KSEA, Vol. 6, No. 1, pp. 137-145, 2000.
  3. Song, S. H., Kim, H. R. and Chung, J. T., "A Study on Vibration Reduction of an Industrial Fan," Trans. of KSNVE, Vol. 10, No. 3, pp. 457-464, 2000.
  4. Jeon, J. H. and Kim, Y. H., "Low Frequency Noise Reduction Inside Duct by Using Membrane," Trans. of KSNVE, Vol. 14, No. 11, pp. 1083-1090, 2004. https://doi.org/10.5050/KSNVN.2004.14.11.1083
  5. Kim, Y. W. and Kim, B. S., "An Experimental Study on the Performance Improvement of Industrial Blower Silencer," Trans. of KSNVE, Vol. 15, No. 9, pp. 1060-1069, 2005. https://doi.org/10.5050/KSNVN.2005.15.9.1060
  6. Kim, B. K., Kim, S. R., Kim, H. S. and Shin, M. C., "Performance Test and Evaluation of Ship Exhaust Muffer," Trans. of KSNVE, Vol. 18, No. 12, pp. 1237-1242, 2008. https://doi.org/10.5050/KSNVN.2008.18.12.1237
  7. Munjal, M. L., Acoustics of Ducts and Mufflers, John Wiley & Sons, 1987.