대한조선학회논문집 (Journal of the Society of Naval Architects of Korea)

  • 제46권1호
  • /
  • Pages.31-42
  • /
  • 2009
  • /
  • 1225-1143(pISSN)
  • /
  • 2287-7355(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

Permanent Means of Access 강도 평가 방법에 대한 연구

A Procedure for a Strength Assessment of Permanent Means of Access Structure

  • 장범선 (삼성중공업 기본설계팀 서울해양설계) ;
  • 정성욱 (삼성중공업 조선해양연구소 구조연구) ;
  • 고대은 (동의대학교 조선해양공학과) ;
  • 전민성 (삼성중공업 조선해양연구소 구조연구) ;
  • 김지영 (삼성중공업 조선해양연구소 구조연구)
  • Jang, Beom-Seon (Samsung Heavy Industries Co., Ltd., Offshore Basic Engineering Team, Seoul Offshore Design Center) ;
  • Chung, Sung-Wook (Samsung Heavy Industries Co., Ltd., Marine Research Institute, Structure Research) ;
  • Ko, Dae-En (Dong-Eui University, Department of Naval Architecture and Ocean Engineering) ;
  • Chun, Min-Sung (Samsung Heavy Industries Co., Ltd., Marine Research Institute, Structure Research) ;
  • Kim, Ji-Young (Samsung Heavy Industries Co., Ltd., Marine Research Institute, Structure Research)
  • 발행 : 2009.02.20
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Common structural rule (CSR) doesn' t provide any other specific regulations for permanent means of access (PMA) platform structure in a cargo oil tank. The PMA platform is recommended to comply with scantling requirement of local support member. However, it leads to too conservative scantlings compared with actual loads imposed on the platform. This paper proposes a strength assessment procedure for the PMA structure based on a nonlinear ultimate strength. The ultimate strength is evaluated in a sufficiently conservative way. The first linear buckling mode is used as an initial imperfection shape and its magnitude is determined using the definitions of DNV PULS. Since the same imperfection mode as the failure mode of the ultimate limit state is assumed, it can accelerate the failure. Au ultimate strength capacity curve obtained from a series of nonlinear FE analysis is compared with actual stresses calculated by CSR cargo hold analysis.

키워드

참고문헌

  1. ANSYS, 2006, User's manual(version 10.0), Swanson Analysis Systems Inc., Houston
  2. ALPS/ULSAP, 2006, A computer program for ultimate limit state assessment for stiffened panels(version 2006.3), Proteus Engineering, Stevensville, MD, USA
  3. DNV PULS, 2006, User' s manual(version 2.05), Technical Report No. 2004-0406, Det Norske Veritas, Oslo
  4. IACS, 2006, Common structural rules for double hull oil tankers, International Association of Classification Societies, London
  5. MSC.NASTRAN, 2005, User' s Manual (version 2005r3b), MSC.Software Corporation, Santa Ana, CA, USA
  6. MSC.PATRAN, 2005, User' s Manual(version 2005r2), MSC.Software Corporation, Santa Ana, CA, USA
  7. Paik, J.K., and Kim, C.R., 1988, “ Simple Formulae for Buckling and Ultimate Strength Estimation of Plates Subjected to Water Pressure and Uniaxial Compression,” Journal of the Society of Naval Architects, Vol. 25, No. 4, pp. 69-80
  8. Paik, J.K. and Lee J.M., 1996, “ An Empirical formulation for Predicting the Ultimate Compressive Strength of Plates and Stiffened Plates,” Journal of the Society of Naval Architects, Vol. 33, No. 3, pp. 8-21
  9. Paik, J.K., Lee, J.M., Park, Y.I., Seo, J.K, and Chun, Y.O., 2004, “ A Benchmark study on ultimate strength predictions of ship stiffened panels-Using FEA, DNV PULS and ALPS/ULSAP,” Proceedings of the Annual Autumn Meeting The Society of Naval Architects of Korea, pp. 358-365
  10. Paik, J.K., Seo, J.K., Kim, B.J. Suh, Y.S. and Jang, B.S., 2007, “ Methods for Ultimate Limit State Assessment of Marine Structures: A Benchmark Study,” Proc. International Conference on Advancements in Marine Structures, Glasgow, UK, pp. 12-14
  11. Paik, J.K., and Thayamballi, A.K., 2003, Ultimate limit state design of steel-plated structures, John Wiley & Sons, Chichester, UK
  12. Paik, J.K., and Thayamballi, A.K., 2007, Shipshaped offshore installations: Design, building, and operation, Cambridge University Press, Cambridge, UK