참고문헌
- Casey, M. V., 1994, "Computational Methods for Preliminary Design and Geometry Definition in Turbomachinery," AGARD LS , pp. 1-22
- Casey, M. V., 1987, "A Meanline Prediction Method for Estimating the performance Characteristic of an Axial Compressor Stage," Proc. I. Mech. E, 1987-6, paper C264/87, pp. 273-285
- Herrig, L. J., Emery, J. C. and Erwin, J. R., 1957, "Systematic Two-Diemnsional Cascade Tests of NACA 65-Series Compressor Blades at Low Speeds," NACA TN 3916
- Johnsen, I. A. and Bullock, R. O., 1965, "Aerodynamic Design of Axial-Flow Compressors," NASA SP-36
- Lim, J. S. and Chung, M. K., 1987, "Efficiency and Weight Prediction of Axial Flow Compressor with Three Dimensional Blade Configuration," Trans. of the KSME, Vol. 11, No. 4, pp. 648-662
- Kim, B. N. and Chung, M. K., 1994, "Off-Design Performance Prediction of an Axial Flow Compressor Stage Using Simple Loss Correlation," Trans. of the KSME(B), Vol. 18, No. 12, pp. 3357-3368
- Yoon, S. H., Lee, K. Y., Park, J. Y., Park, T. J., Choi, M. S. and Baek, J. H., 2001, "Development of Axial Compressor Design and Performance/Flow Analysis Program," Proceeding (B) of the KSME 2006 Fall Annual Meeting, pp. 658-663
- Lieblein, S., 1960, "Incidence and Deviation Angle Correlations for Compressor Cascades," ASME Journal of Basic Engineering, Vol. 82, pp. 575-587 https://doi.org/10.1115/1.3662666
- Carter, A. D. S., 1950, "The Low Speed Performance of Related Aerofoils in Cascade," ARC CP 29
- Koch, C. C., and Smith, L. H. Jr., 1976, "Loss Sources and Magnitudes in Axial-Flow Compressors," ASME Journal of Engineering for Power, Vol. 98, No. 3, pp. 411-424 https://doi.org/10.1115/1.3446202
- Aungier, R. H., 2003, "Axial-Flow Compressors, A Strategy for Aerodynamic Design and Analysis," ASME Press
- Lieblein, S., 1959, "Loss and Stall Analysis of Compressor Cascades," ASME Journal of Basic Engineering, Vol. 81, pp. 387-400
- Howell, A. R., 1942, "The Present Basis of Axial Flow Compressor Design," R&M 2095, British Aeronautical Research Council, London, United Kingdom
- Wright, P. I., and Miller D. C., 1991, "An Improved Compressor Performaance Prediction Model," I. Mech. E, paper C423/028
- Goestellow, J. P., 1984, Cascade Aerodynamics, Pergamon Press
- Vavra, 1974, Aero-Thermodynamics and Flow in Turbomachinery, Krieger Pub. Co.
- Koch, C. C., 1981, "Stalling Pressure Rise Capability of Axial Flow Compressor Stages," ASME Journal of Engineering for Power, Vol. 103, No. 3, pp. 645-655 https://doi.org/10.1115/1.3230787
- Freeman, C., 1985, "Effect of Tip Clearance Flow on Compressor stability and Engine Performance," VKI Symposium Tip Clearance Effects in Axial Turbomachines
- Cetin, M., Ucer, A. S., Hirsh, Ch. and Serovy, G. K., 1987, "Application of Modified Loss and Deviation Correlations to Transonic Axial Compressors," AGARD Report No. 745
- Creveling, H. F., 1968, "Axial-Compressor Computer Program for Calculating Off-Design Performance," NASA CR 72472
- Britsch, W. R., Osborn, W. M., and Laessing Cetin, M., Ucer, A. S., Hirsh, Ch. and Serovy, G. K., 1987, "Application of Modified Loss and Deviation Correlations to Transonic Axial Compressors," AGARD Report No. 745
피인용 문헌
- vol.13, pp.1, 2010, https://doi.org/10.5293/KFMA.2010.13.1.059