International Journal of Concrete Structures and Materials

Korea Concrete Institute (한국콘크리트학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Crushed RAP on Free and Restrained Shrinkage of Mortars

  • Published : 2009.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

Reclaimed asphalt pavement (RAP) is abundant substitute for natural aggregate in many areas. It is obtained by crushing of old road pavements in milling machine during rehabilitation and reconstruction process. In this study, reclaimed asphalt pavement mortars (RAPM) have been produced with different cement dosages and replacement ratios. The destructive and nondestructive tests have been conducted on specimens to determine physical and mechanical properties of RAPM. The free and restrained shrinkage tests on RAPM have been conducted to predict fractural behavior of mortars. The aim of the shrinkage tests was to delay crack formation and improve strain capacity of mortars before cracking. The results showed that RAPM exhibits lower elasticity modulus; however the tensile capacity was improved for deformation before cracking.

Keywords

References

  1. Nagataki, S., Gokce, A., Saeki, T., and Hisada, M., “Assessment of Recycling Process Induced Damage Sensitivity of Recycled Concrete Aggregates,” Cement and Concrete Research, Vol. 34, No. 6, 2004, pp. 965-971 https://doi.org/10.1016/j.cemconres.2003.11.008
  2. Malhotra, V. M., Zhang, M. H., Read P. H., and Ryell, J., “Long-term Mechanical Properties and Durability Characteristics of High-strength/high-performance Concrete Incorporating Supplementary Cementing Materials under Outdoor Exposure Conditions,” Journal of ACI Materials, Vol. 97, No. 5, 2000, pp. 518-525
  3. Huang, B., Shu, X., and Li, G., “Laboratory Investigation of Portland Cement Concrete Containing Recycled Asphalt Pavements,” Cement and Concrete Research, Vol. 35, No. 10 , 2005, pp. 2008-2013 https://doi.org/10.1016/j.cemconres.2005.05.002
  4. Li, G., Stubblefield, M. A., Garrick, G., Eggers, J., Abadie, C., and Huang, B., “Development of Waste Tire Modified Concrete,” Cement and Concrete Research, Vol. 34, No.12, 2004, pp. 2283-2289 https://doi.org/10.1016/j.cemconres.2004.04.013
  5. Topcu, Y. B., “The properties of Rubberized Concrete,” Cement and Concrete Research, Vol. 25, No. 2, 1995, pp. 304-310 https://doi.org/10.1016/0008-8846(95)00014-3
  6. Huang, B., Li, G., Pang, S. S., and Eggers, J., “Investigation into Waste Tire Rubber-filled Concrete,” Journal of Materials in Civil Engineering, Vol. 16, No. 3, 2004, pp. 187-194 https://doi.org/10.1061/(ASCE)0899-1561(2004)16:3(187)
  7. Decker, D. S. and Young, T. J., “Handling RAP in an HMA Facility,” Proceedings of the Canadian Technical Asphalt Association, Edmonton, Alberta, Canada, 1996, pp. 23-30
  8. Turatsinze, A., Bonnet, S., and Granju, J. L., “Potential of Rubber Aggregates to Modify Properties of Cement Based Mortars: Improvement in Cracking Shrinkage Resistance,” Construction and Building Materials, Vol. 21, No. 1, 2007, pp. 176-181 https://doi.org/10.1016/j.conbuildmat.2005.06.036
  9. Hossain, A. B. and Weiss, J., “The Role of Specimen Geometry and Boundary Conditions on Stress Development and Cracking in the Restrained Ring Test,” Cement and Concrete Research, Vol. 36, No. 1, 2006, pp. 189-199 https://doi.org/10.1016/j.cemconres.2004.06.043

Cited by

  1. Experimental Investigation of PCC Incorporating RAP vol.12, pp.1, 2018, https://doi.org/10.1186/s40069-018-0227-x