References
- Chun, Y. N., Song, H. O., 2008, 'Syngas Production Using Gliding Arc Plasma,' Energy Sources, Vol. 30, pp. 1202-1212 https://doi.org/10.1080/15567030600817670
- Silberova, B. Venvik, H. J., Holmen, A, 2005, 'Production of Hydrogen by Short Contact Time Partial Oxidation and Oxidative Steam Reforming of Propane,' Catalysis Today, Vol. 99, No 1-2, pp. 69-76 https://doi.org/10.1016/j.cattod.2004.09.025
- Kolb, G., Zapf, R., Hessel, Lowe, H., 2004,'Propane Steam Reforming in Micro-Channels-Resultsfrom Catalyst Screening and Optimisation,' Applied Catalysis A: General, Vol 277, No.1-2, pp.155-166 https://doi.org/10.1016/j.apcata.2004.09.007
- Chun, Y. N., Kim, S.C., 2007, 'Study on Characteristic of Methane Reforming and Production of Hydrogen using GlidArc Plasma,' The Korean Society of Mechanical Engineers (B), Vol. 31, No. 11, pp, 942-948 https://doi.org/10.3795/KSME-B.2007.31.11.942
- Indarto, A., Choi, J.-W., Lee, H., Song, H. K., 2006, 'Effect of Additive Gases on Methane Conversion Using Gliding Arc Discharge,' Energy, Vol. 31, No. 14, pp. 2986-2995 https://doi.org/10.1016/j.energy.2005.10.034
- Paulmier, T., Fulcheri, L., 2005, 'Use of Non-Thermal Plasma for Hydrocarbon Reforming,' Chemical Engineering Journal, Vol. 106, No.1, pp. 59-71 https://doi.org/10.1016/j.cej.2004.09.005
- Sreethawong, T., Thakonpatthanakun, P., Chavadej, S., 2007, 'Partial Oxidation of Methane with Air for Synthesis Gas Production in a Multistage Gliding Arc Discharge System,' International Journal of Hydrogen Energy, Vol. 32, No. 8, pp. 1067-1079 https://doi.org/10.1016/j.ijhydene.2006.07.013
- Laosiripojana, N., Assabumrungrat, S., 2006 'Hydrogen Production from Steam and Autothermal Reforming of LPG over High Surface Area Ceria,' Journal of Power Sources, Vol. 158, No.2, pp. 1348-1357 https://doi.org/10.1016/j.jpowsour.2005.10.058
- Kabashima, H., Einaga, H., Futamura, S., 2003, 'Hydrogen Generation From Water, Methane, and Methanol With Nonthermal Plasma,' IEEE Transactions on Industry Applications, Vol. 37, No. 2, pp. 340-345 https://doi.org/10.1109/TIA.2003.808968
- Lee, D. H., Kim, K. T., Cha, M. S., Song, Y. H., 2007, 'Optimization Scheme of a Rotating Gliding Arc Reactor for Partial Oxidation of Methane,' Proceedings of the Combustion Institute, Vol. 31, No.2, pp. 3343-3351 https://doi.org/10.1016/j.proci.2006.07.230
- Petitpas, G., Rollier, J. D., Darmon, A., Gonzalez-Aguilar, J., Metkemeijer, R., Fulcheri, L., 2007, 'A Comparative Study of Non-Thermal Plasma Assisted Reforming Technologies,' International Journal of Hydrogen Energy, Vol. 32, No.14, pp. 2848-2867 https://doi.org/10.1016/j.ijhydene.2007.03.026
Cited by
- Thermal Flow Analysis of Operating Parameters in Autothermal Reformer vol.14, pp.6, 2011, https://doi.org/10.5293/kfma..2011.14.6.061