References
- O'Hayre, R., Cha, S-W., Colella, W. and Prinz, F.B., 2006, “Fuel Cell Fundamentals,” John Wiley & Sons, pp. 292-306
- Larminie, J. and Dicks, A., 2003, “Fuel Cell System Explained, Second Edition,” John Wiley & Sons, pp. 229-279
- Lee, S., 2008, “Numerical Analysis of Fuel Reforming Systems for Efficient Hydrogen Production,” KAIST, Daejeon, KOREA
- Hoang, D.L., Chan, S.H. and Ding, O.L., 2005, “Kinetic and Modeling Study of Methane Steam Reforming over Sulfide Nickel Catalyst on a Gamma Alumina Support,” Chemical Engineering J., Vol. 112, No. 1/3, pp. 1-11 https://doi.org/10.1016/j.cej.2005.06.004
- Choi, Y. and Stenger, H.G., 2005, “Kinetics, Simulation and Optimization of Methanol Steam Reformer for Fuel Cell Application,” J. Power Source, Vol. 142, No. 2, pp. 81-91 https://doi.org/10.1016/j.jpowsour.2004.08.058
- CD adapco Group, 2004, “STAR-CD Methodology,” CD adapco Group, pp. 1-1-1-7
- Park, J., Lee, S., Lim, S. and Bae, J., “Numerical Study on Correlation Between Operating Parameters and Reforming Efficiency for a Methane Autothermal Reformer,” J. KSME-B, Vol. 32, No. 8, pp. 612-620
- Seo. Y.-S., Seo, D.-J., Seo, Y.-T. and Yoon, W.-L., 2006, “Investigation of the Characteristics of a Compact Steam Reformer Integrated with a Water-Gas Shift Reactor,” J. Power Source, Vol. 161, No. 2, pp. 1208-1216 https://doi.org/10.1016/j.jpowsour.2006.05.039
- Niven, R. K., 2002, “Physical Insight into the Ergun and Wen&Yu Equations for Fluid Flow in Packed and Fluidized Beds,” J. of Chemical Engineering Science, Vol. 57, No. 3, pp. 527-534 https://doi.org/10.1016/S0009-2509(01)00371-2
- Lee, S., Bae, J., Lim, S. and Park, J., 2008, “Improved Configuration of Supported Nickel Catalysts in a Steam Reformer for Effective Hydrogen Production from Methane,” J. Power Source, Vol. 180, No. 1, pp. 506-515 https://doi.org/10.1016/j.jpowsour.2008.01.081
- Xu, J. and Froment, G. F., 1989, “Methane Steam Reforming, Methanation and Water-Gas Shift I. Intrinsic Kinetics,” J. of AiChE., Vol. 35, No. 1, pp. 88-96 https://doi.org/10.1002/aic.690350109
- Lee, S., Lim, S. and Bae, J., 2006, “Heat and Mass Transfer Characteristics in Steam Reforming Reactor,” J. KSNRE, Vol. 2, No. 4, pp. 56-63
- Larminie, J. and Dicks, A., 2003, “Fuel Cell System Explained, Second Edition,” John Wiley & Sons, pp. 207-228
- Kang, I., 2007, “Study on Performance of Diesel Autothermal Reformer for Solid Oxide Fuel Cell,” KAIST, Daejeon, KOREA
- Chu, H.S., Wang, C.P., Liao, W.C. and Yan, W.M., 2005, “Transient Behavior of CO Poisoning of the Anode Catalyst Layer of a PEM Fuel Cell,” J. Power Source, Vol. 142, No. 2, pp. 1071-1077 https://doi.org/10.1016/j.jpowsour.2005.12.045
Cited by
- A study on the Temperature Profile with combustion conditions change for the Optimum drive of Plate type Hydrogen Generation Sytem vol.36, pp.2, 2012, https://doi.org/10.5916/jkosme.2012.36.2.238
- A Study on the Heat Accumulation Performance of Ceramic Honeycomb located on the Flat Burner vol.36, pp.2, 2012, https://doi.org/10.5916/jkosme.2012.36.2.244
- Numerical Analysis of New Proposals to Enhance Heat Transfer in MCFC'S Preconverter vol.37, pp.8, 2013, https://doi.org/10.3795/KSME-B.2013.37.8.753
- Geometric Characteristics of Methane Steam Reforming with Low Temperature Heat Source vol.40, pp.12, 2016, https://doi.org/10.3795/KSME-B.2016.40.12.793
- Numerical Study on the Performance and the Heat Flux of a Coaxial Cylindrical Steam Reformer for Hydrogen Production vol.33, pp.9, 2009, https://doi.org/10.3795/KSME-B.2009.33.9.709
- Experimental Study of Steam Reforming Assisted by Catalytic Combustion in Concentric Annular Reactor vol.34, pp.4, 2010, https://doi.org/10.3795/KSME-B.2010.34.4.375
- Parametric Study of SOFC System Efficiency Under Operation Conditions of Butane Reformer vol.34, pp.4, 2010, https://doi.org/10.3795/KSME-B.2010.34.4.341
- Thermal Behaviors and Reaction Characteristics of an Integrated Reactor with Catalytic Combustion-Reforming According to Operation Conditions vol.35, pp.6, 2011, https://doi.org/10.3795/KSME-B.2011.35.6.641