초록
국내에서 대표적으로 버려지는 폐벌목인 잣나무와 리기다소나무를 이용하여 고부가가치 제품으로 활용할 수 있는 활성탄 개발을 위해 목탄 제조의 최적조건을 측정하였다. 폐벌목 활성탄 제조에 관한 연구는 저온열분해 공정에 의한 폐벌목의 목탄 제조공정과 화학적 활성화반응을 이용한 목탄의 활성탄 제조공정으로 나누어지며 본 논문은 저온열분해에 의한 폐벌목의 목탄 제조공정을 다루고 있다. 실험결과, 목탄 제조공정의 경우 $150^{\circ}C$에서 6시간 건조 후 $500^{\circ}C$에서 60분 동안 열분해 공정을 거쳐 생성된 목탄이 요오드 흡착력과 비표면적(BET)등의 물성이 가장 우수하였으며 SEM사진을 관찰한 결과 이 조건에서 세공이 발달함을 알 수 있었다. 일반적으로 잣나무를 이용하여 제조된 목탄의 물성치가 리기다소나무를 이용한 목탄보다 우수함을 알 수 있었다. 본 연구의 최적 실험조건에서 잣나무를 이용한 목탄의 경우 BET값이 약 $640m^2/g$에 이르렀다.
Using a pinus koraiensis and pinus rigida which are normally being discarded in South Korea, the optimal condition of producing charcoals has been studied to develop activated carbons which can be recycled as a higher value-added product. A study on manufacture of activated carbons from a discarded timber consists of two processes, the production process of charcoals from a discarded timber by low temperature pyrolysis process and the production process of activated carbons from the charcoals by chemical activation reaction. This study deals with the production process of charcoals from a discarded timber by low temperature pyrolysis process. As a results of experiment, it was investigated that charcoals produced through drying at $150^{\circ}C$ for 6hr and pyrolysis process at $500^{\circ}C$ for 1hr had the highest values in physical properties such as iodine number and BET surface area. Furthermore, through observing SEM images, the maximum development of porosity had been founded in this condition. It was confirmed that values of physical properties on using a pinus koraiensis are superior to the ones when using a pinus rigida. When charcoals were produced from a pinus koraiensis in this condition, BET surface area was approx. $640m^2/g$.