References
- Puertas, I. and Luis, C. J., 'A study on the machining parameters optimization of electrical discharge machining,' Journal of Materials Processing Technology, Vol. 143-144, pp. 521-526, 2003 https://doi.org/10.1016/S0924-0136(03)00392-3
- Masuzawa, T., 'State-of-the-art on micromachining,' Annals of the CIRP, Vol. 49, No. 2, p. 473, 2000 https://doi.org/10.1016/S0007-8506(07)63451-9
- Singh, S., Maheshwari, S. and Pandey, P. C., 'Some investigations into the electrical discharge machining of hardened tool steel using different electrode materials,' Journal of Materials Processing Technology, Vol. 149, Issues 1-3, pp. 272-277, 2004 https://doi.org/10.1016/j.jmatprotec.2003.11.046
- Amorim, F. L. and Weingaertner, W. L., 'The influence of generator actuation mode and process parameters on the performance finish EDM of a tool steel,' Journal of Materials Processing Technology, Vol. 166, Issue 3, pp. 411-416, 2003 https://doi.org/10.1016/j.jmatprotec.2004.08.026
- Guu, Y. H., 'AFM surface imaging of AISI D2 tool steel machined by the EDM process,' Applied Surface Science, Vol. 242, Issues 3-4, pp. 245-250, 2005 https://doi.org/10.1016/j.apsusc.2004.08.028
- 'What are the advantages in using punch industry's SKH-51 products (high speed steel),' http://www.punch.co.jp/english/en-topf.htm, 2007
- Lim, H. S., Wong, Y. S., Rahman, M. and Lee, E. M. K., 'A study on the machining of high-aspect ratio micro-structures using micro EDM,' Journal of Materials Processing Technology, Vol. 140, Issues 1-3, pp. 318-325, 2003 https://doi.org/10.1016/S0924-0136(03)00760-X
- Tsai, Y., Masuzawa, T., 'An index to evaluate the wear resistance of the electrode in micro-EDM,' Journal of Materials Processing Technology, Vol. 149, Issues 1-3, pp. 304-309, 2004 https://doi.org/10.1016/j.jmatprotec.2004.02.043
- Lee, H. T., Rehbach, W. P., Tai, T. Y. and Hsu, F. C., 'Relationship between electrode size and surface cracking in the EDM machining process,' Journal of Materials Science, Vol. 39, No. 23, pp. 6981-6986, 2004 https://doi.org/10.1023/B:JMSC.0000047541.95138.17
- Habib, M. A., Gan, S. W., Lim, H. S. and Rahman, M., 'Fabrication of EDM electrodes by Localized Electrochemical Deposition,' International Journal of Precision Engineering and Manufacturing, Vol. 9, No. 2, pp. 75-80, 2008
- Egashira, K., Matsugasako, A., Tsuchiya, H. and Miyazaki, M., 'Electrical discharge machining with ultralow discharge energy,' Precision Engineering, Vol. 30, Issue 4, pp. 414-420, 2006 https://doi.org/10.1016/j.precisioneng.2006.01.004
- Masuzawa, T., 'Micro-EDM,' Proceedings of the 13th International symposium for electromachining, Vol. 1, pp. 3-20, 2001
- Wong, Y. S., Rahman, M., Lim, H. S., Han, H. and Ravi, N., 'Investigation of micro-EDM material removal characteristics using single RC-pulse discharges,' Journal of Materials Processing Technology, Vol. 140, Issues 1-3, pp. 303-307, 2003 https://doi.org/10.1016/S0924-0136(03)00771-4
- Jung, J., Ko, S. H., Jeong, Y. H., Min, B. K. and Lee, S. J., 'Estimation of material removal volume of a micro-EDM drilled hole using discharge pulse monitoring,' International Journal of Precision Engineering and Manufacturing, Vol. 8, No. 4, pp. 45-49, 2007
- Han, F., Wachi, S. and Kunieda, M., 'Improvement of machining characteristics of micro-EDM using transistor type isopulse generator and servo feed control,' Precision Engineering, Vol. 28, Issue 4, pp. 378-385, 2004 https://doi.org/10.1016/j.precisioneng.2003.11.005