Effect of aggregation on shear and elongational flow properties of acrylic thickeners

  • Published : 2008.09.30

Abstract

The effect of intermolecular aggregation induced by hydrophobic and electrostatic interactions on shear and elongational flow properties of aqueous acrylic thickener solutions is discussed. Complex shear modulus is determined at frequencies up to $10^4$ rad/s employing oscillatory squeeze flow. Extensional flow behavior is characterized using Capillary Break-up Extensional Rheometry. Aqueous solutions of poly(acrylic acid)(PAA)/poly(vinylpyrrolidone-co-vinylimidazole) (PVP-VI) mixtures exhibit unusual rheological properties described here for the first time. Zero-shear viscosity of the mixtures increases with decreasing pH and can exceed that of the pure polymers in solution by more than two orders of magnitude. This is attributed to the formation of complexes induced by electrostatic interactions in the pH range, where both polymers are oppositely charged. PAA/PVP-VI mixtures are compared to the commercial thickener Sterocoll FD (BASF SE), which is a statistical co-polymer including (meth) acrylic acid and ethylacrylate (EA) forming aggregates in solution due to "sticky" contacts among hydrophobic EA-sequences. PAA/PVP-VI complexes are less compact and more deformable than the hydrophobic Sterocoll FD aggregates. Solutions of PAA/PVP-VI exhibit a higher zero-shear viscosity even at lower molecular weight of the aggregates, but are strongly shear-thinning in contrast to the weakly shear-thinning solutions of Sterocoll FD. The higher ratio of characteristic relaxation times in shear and elongation determined for PAA/PVP-VI compared to Sterocoll FD solutions reflects, that the charge-induced complexes provide a much stronger resistance to extensional flow than the aggregates formed by hydrophobic interactions. This is most likely due to a break-up of the latter in extensional flow, while there is no evidence for a break-up of complexes for PAA/PVP-VI mixtures. These flexible aggregates are more suitable for the stabilization of thin filaments in extensional flows.

Keywords

References

  1. Abdala, A. A., W. Wu, K. R. Olsen, R. D. Jenkins, A. E. Tonelli and S. A. Khan, 2004, Solution rheology of hydrophobically modified associative polymers: effects of backbone composition and hydrophobe concentration, J. Rheol. 48, 979-994 https://doi.org/10.1122/1.1773781
  2. Agarwal, S. and R. K. Gupta, 2002, An innovative extensional viscometer for low-viscosity and low-elasticity liquids, Rheol. Acta 45, 456-460
  3. Anna, S. and G. H. McKinely, 2001, Elasto-capillary thinning and breakup of model elastic liquids, J. Rheol. 45, 115-138 https://doi.org/10.1122/1.1332389
  4. Bazilevskii, A. V., V. M. Entov and A. N. Rozhkov, 2001, Breakup of an Oldroyd liquid bridge as a method for testing the rheological properties of polymer solutions, Polym. Sci. Ser. A 43, 716-726
  5. Braun, D. B. and M. R. Rosen, 2000, Rheology Modifiers Handbook, Practical Use & Application, William Andrew Publishing, Norwich, NY, US
  6. Clasen, C., J. P. Plog, W. M. Kulicke, M. Owens, C. Macosko, L. E. Scriven, M. Verani and G. H. McKinley, 2006, How dilute are dilute solutions in extensional flows, J. Rheol. 50, 849-881 https://doi.org/10.1122/1.2357595
  7. Colby, R. H., M. Rubinstein and M. Daoud, 1994, Hydrodynamics of polymer solutions via two-parameter scaling, J. Phys. ZZ (Paris) 4(8), 1299-1310
  8. Crassous, J. J., R. Regisser, M. Ballauff and N. Willenbacher, 2005, Characterization of the viscoelastic behavior of complex fluids using the piezoelectric axial vibrator, J. Rheol. 49, 851-863 https://doi.org/10.1122/1.1917843
  9. Dai, S., K. C. Tam and R. D. Jenkins, 2000, Aggregation behavior of methacrylic acid/ethyl acrylate copolymer in dilute solutions, Eur. Polym. J. 36, 2671-2677 https://doi.org/10.1016/S0014-3057(00)00022-7
  10. Dexter, R. W., 1996, Measurement of extensional viscosity of polymer solutions and its effects on atomization from a spray nozzle, Atomization and Sprays 6, 167-191 https://doi.org/10.1615/AtomizSpr.v6.i2.30
  11. Entov, V. M. and E. J. Hinch, 1997, Effect of a spectrum of relaxation times on the capillary thinning of a filament of elastic liquid, J. Non-Newtonian Fluid Mech. 72, 31-53 https://doi.org/10.1016/S0377-0257(97)00022-0
  12. Fernando, R. H., L. L. Xing and J. E. Glass, 2000, Rheology parameters controlling spray atomization and roll misting behavior of waterborne coatings, Progress in Organic Coatings 40, 35-38 https://doi.org/10.1016/S0300-9440(00)00112-0
  13. Hager and Martin,1957, Copolymer of acrylic acid ester, method of making, and use of said polymer to coat textile fabrics. US patent 3003987 and Martin and Hager, 1957, Acrylic tetrapolymer and textiles coated with the same. US patent 3070561
  14. Kennedy, J. C., J. Meadows and P. Williams, 1995, Shear and extensional viscosity characteristics of a series of hydrophobically associating polyelectrolytes, J. Chem. Soc. Faraday Trans. 91, 911-916 https://doi.org/10.1039/ft9959100911
  15. Kheirandish, S., I. Guybaidullin, W. Wohlleben and N. Willenbacher, 2008, Shear and elongational flow behavior of acrylic thickener solutions. Part I: effect of intermolecular aggregation, Rheol. Acta available online, DOI 10.1007/s00397-008-0292-1
  16. Kirschenmann, L., 2003, Ph.D. Thesis, Institut fur Dynamische Materialprufung, University of Ulm
  17. Matter, Y., 2008, Ph.D. Thesis, University of Karlsruhe
  18. Matter, Y., V. Schaedler and N. Willenbacher, 2008, Shear and elongational flow properties of acrylate-based polyelectrolyte complexes, manuscript in preparation
  19. McKinley, G. H. and A. Tripathi, 2000, How to extract the Newtonian viscosity from capillary breakup measurements in a filament rheometer, J. Rheol. 44, 653-670 https://doi.org/10.1122/1.551105
  20. Miller, 1960, Mineral coated paper products and methods of making them. US patent 3081198
  21. Ng, S. L., R. P. Mun, D. V. Boger and D. F. James, 1996, Extensional viscosity measurements of dilute solutions of various polymers, J. Non-Newtonian Fluid Mech. 65, 291-298 https://doi.org/10.1016/0377-0257(96)01463-2
  22. Oliveira, M. S. N., R. Yeh and G. H. McKinley, 2006, Iterated stretching, extensional rheology and formation of beads-on-astring structures in polymer solutions, J. Non-Newtonian Fluid Mech. 137, 137-148 https://doi.org/10.1016/j.jnnfm.2006.01.014
  23. Plog, J. P., W. M. Kulicke and C. Clasen, 2005, Influence of molar mass distribution on the elongational behavior of polymer solutions in capillary breakup, Appl. Rheol. 15, 28-37
  24. Siddiq, M., K. C. Tam and R. D. Jenkins, 1999, Dissolution behaviour of model alkali-soluble emulsion polymers: effects of molecular weights and ionic strength, Colloid Polym. Sci. 277, 1172-1178 https://doi.org/10.1007/s003960050506
  25. Solomon, M. J. and S. J. Muller, 1996, The transient extensional behavior of polystyrene-based Boger fluids of varying solvent quality and molecular weight, J. Rheol. 40, 837-856 https://doi.org/10.1122/1.550770
  26. Stelter, M., G. Brenn, A. L. Yarin, R. P. Singh and F. Durst, 2002, Investigation of the elongational behavior of polymer solutions by means of an elongational rheometer, J. Rheol. 46, 507-527 https://doi.org/10.1122/1.1445185
  27. Tan, H., K. C. Tam, V. Tirtaamadja, R. D. Jenkins and D. R. Bassett, 2000, Extensional properties of model hydrophobically modified alkali-soluble associative (HASE) polymer solutions, J. Non-Newtonian Fluid Mech. 92, 167-185 https://doi.org/10.1016/S0377-0257(00)00093-8
  28. Tuladhar, T. R. and M. R. Mackley, 2008, Filament stretching rheometry and break-up behaviour of low viscosity polymer solutions and inkjet fluids, J. Non-Newtonian Fluid Mech. 148, 97-108 https://doi.org/10.1016/j.jnnfm.2007.04.015
  29. Wang, C., K. C. Tam and C. B. Tan, 2005, Dissolution and swelling behaviors of random and cross-linked methacrylic acidethyl acrylate copolymers, Langmuir 21, 4191-4199 https://doi.org/10.1021/la047198b