DOI QR코드

DOI QR Code

Measurement and Calculation of Bulk Modulus for DME

DME 체적탄성계수의 측정 및 계산

  • 조승환 (인하대학교 대학원 기계공학과) ;
  • 이범호 (인하대학교 대학원 기계공학과) ;
  • 이대엽 (인하대학교 기계공학과)
  • Published : 2008.11.01

Abstract

DME(Di-methyl Ether) has been expected to be one of the promising alternative fuels for compression ignition engines due to its low emission characteristics for particulate matter. However, its physical properties such as density, bulk modulus and viscosity are not comparable to those of conventional diesel fuel. Especially, problems caused by low lubricity and high compressibility need to be understood more thoroughly, when a DME fuel is used for compression ignition engine, especially with mechanical fuel supply system. In this study, measurement and calculation of DME's bulk modulus were carried out over the range of temperatures from $-3^{\circ}C$ to $53^{\circ}C$, and pressures from 50 bar to 250 bar using an experimental apparatus built in this work. The results show that DME is prone to be compressed more easily compared to diesel fuel. A comparison of bulk modulus with butane and propane were also made in this work.

Keywords

References

  1. Masaaki Kato, Hisaharu Takeuchi, Kazutoshi Koie, Hitoshi Sekijima, Shuichi Kajitani, Zhili L. Chen and Satoshi Hashimoto, 2004, "A Study of Di-methyl Ehter(DME) Flow in Diesel Nozzle," SAE Paper, No. 2004-01-0081
  2. Zhang, G. D., Liu, H., Xia, X. X. and Yang, Q. L., 2004, "Study on the Injection Process of a Direct-injection Diesel Engine Fuelled with Di-methyl Ehter," Processing of the Institution of Mechanical Engineering, pp. 1341~1347
  3. Ho Teng, James C. McCandless and Jeffrey B. Schneyer, 2001, "Thermochemical Characteristics of Di-methyl Ether - An Alternative Fuel for Comperssion-ignition Engines," SAE Paper, No. 2001-01-0154
  4. Inmels, E. C. and Lemmon, E. W., 2007 "Experimental Densities, Vapor Pressure and Critical Point and a Fundamental Equation of State for Di-methyl Ehter," Fluid Phase Equilibria
  5. Reid R. C., Prausnitz J. M. and Poling B. E., 1987, "The Properties of Gases and Liquids," 4th edition, New Youk, McGraw-Hill Book Company
  6. Lee, D. Y., Cho, S. E., Lee, B. H. and Kim, C. S., 2006, "Measurement of Viscosity for Liquid DME," The 3rd Asian DME Conference
  7. Andre L. Bohman, David Morris and James Szybist, 2004, "The Impact of the Bulk Modulus of Diesel Fuels on Fuel Injection Timing," Journal of Energy and Fuels, Vol. 18, pp. 1877~1882 https://doi.org/10.1021/ef049880j
  8. Breda Kegl, 2006, "Numerical Analysis of Injection Characteristics using Bio-diesel Fuel," Journal of Fuel, Vol. 85, pp. 2377~2387 https://doi.org/10.1016/j.fuel.2006.05.009
  9. Rodriguez-Anton, L. M., Casanova-Kindelan, J. and Tardajos, G., 2000, "High Pressure Physical Properties of Fluids used in Diesel Injection Systems," SAE Paper, No. 2000-01-2046
  10. Spencer C. Sorenson, Michael Glensvig and Duane L. Abata, 1998, "Di-methyl Ehter in Diesel Fuel Injection Systems," SAE Paper, No. 981159
  11. Jacobsen, R. T. and Stewart, R. B., 1973, “Thermodynamic Properties of Nitrogen Including Liquid and Vapor Phases from 63K to 2000K with Pressures to 10,000 Bar,” J. Phys. Chem. Ref. Data, 2: pp. 757~992 https://doi.org/10.1063/1.3253132
  12. Younglove, B. A. and Ely, J. F., 1987, “The Physical Properties of Fluids. II. Methane, Ethane, Propane, Isobutane and Normal Butane,” J. Phys. Chem. Ref. Data, 16: pp. 577~798 https://doi.org/10.1063/1.555785
  13. Huber, M. L., Friend, D. G. and Ely, J. F., 1992, “Prediction of the Thermal Conductivity of Refrigerants and Refrigerant Mixtures,” Fluid phase equilibria, Vol. 80, pp. 249~261 https://doi.org/10.1016/0378-3812(92)87072-U
  14. Younglove, B. A. and McLinden, M. O., 1994, "An International Standard Equation of state for the Thermodynamic Properties of Refrigerant 123," J. Phys. Chem. Ref. Data, Vol. 23 No. 5, pp. 731~779 https://doi.org/10.1063/1.555950

Cited by

  1. CFD Simulation for Mixture Characteristic of DME-Propane Liquified Fuels vol.50, pp.2, 2012, https://doi.org/10.9713/kcer.2012.50.2.328