KSCE Journal of Civil and Environmental Engineering Research (대한토목학회논문집)

Korean Society of Civil Engeneers (대한토목학회)
권호 표지
DOI QR코드

DOI QR Code

IBS Beam Element for Nonlinear Seismic Analysis of Steel Moment Frames

강재 모멘트 골조의 비선형 지진 해석을 위한 IBS 보 요소

  • 김달성 ((주)경동기술공사 구조부) ;
  • 김동성 (공주대학교 건설환경공학과) ;
  • 김기동 (공주대학교 건설환경공학과) ;
  • 고만기 (공주대학교 건설환경공학과)
  • Received : 2007.11.06
  • Accepted : 2008.01.14
  • Published : 2008.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

This study presents a non-prismatic beam element for modeling the elastic and inelastic behavior of steel beams, which have the post-Northridge(cover plate) connections in steel moment frames that are subjected to earthquake ground motions. The elastic stiffness matrix for non-prismatric members with increased beam section (IBS) connection is in the closed-form. The plasticity model is of a discrete type and is composed of a series of nonlinear hinges connected by rigid links. The hardening rules can model the inelastic behavior for monotonic and random cyclic loading, and the effects of local buckling. Moreover the determination of yield surfaces, stiffness parameters, and hardening (or softening) rule parameters for IBS beam element were described. Analytical results of the IBS beam element show good correlation with test data and FEM results.

본 연구는 지진운동의 영향 하에서 강제 모멘트 골조로 이루어진 post-Northridge(덮개판) 연결부를 갖는 보의 탄성 및 비탄성 거동을 모델하기 위한 부등단면 보(IBS 보) 요소를 제시한다. 덮개판(IBS) 연결부를 갖는 부등단면 보의 탄성강성 매트릭스는 수치적분이 필요치 않은 수식으로 표현된다. 소성모델은 분포형이며 강체링크로 연결된 일련의 비선형 힌지로 구성 되어있고 경화법칙은 단조 및 임의 주기 하중에 대한 비탄성 거동과 국부좌굴의 효과를 고려할 수 있다. 또한 IBS 보 요소에 대한 항복면, 강성 변수, 그리고 경화(혹은 연화) 법칙 변수의 결정과정을 기술하였고 IBS 보 요소의 해석결과를 실험 및 FEM 해석결과와 비교하였다. IBS 보 요소의 해석결과는 실험 및 FEM 결과와 좋은 상관관계를 보였다.

Keywords

References

  1. 김달성(2006) IBS 연결부를 갖는 보에 대한 해석 요소 개발. 석사학위논문, 공주대학교
  2. AISC (2005a) Seismic provisions for structural steel buildings. ANSI/AISC 341-2005, Chicago
  3. AISC (2005b) Prequalified connections for special and interme- diate steel moment frames for seismic application. ANSI/AISC 358-005, Chicago
  4. ABAQUS (1996) User's manual-version 5.6. Hibbit, Karlsson, and Sorenson, Inc., Pawtucket, R.I.
  5. Dafalias, Y.F. (1975) On Cyclic and Anisotropic Plasticity: I) A General Model Including Material Behavior Under Stress Reversals, II) Anisotropic. Ph.D. Thesis, Dept. of Civ. Engrg., University of California, Berkeley
  6. Federal Emergency Management Agency (FEMA) (2000) Recommended seismic design criteria for new steel moment-frame buildings. FEMA 350, Federal Emergency Management Agency, Washington, D.C.
  7. Engelhardt, M.D. and Sabol, T.A. (1998) Reinforcing of Steel Moment Connections with Cover Plates: Benefits and Limitations. Engineering Structures, Vol. 20, No. 4-6, pp. 510-20 https://doi.org/10.1016/S0141-0296(97)00038-2
  8. Lee, D.Y., Cotton, S.C., Dexter, R.J., and Hajjar, J.F. (2002) Column Stiffener Detailing and Panel Zone Behavior of Steel Moment Frame Connections. Report No. ST-01-3.2, University of Minnesota
  9. Mosaddad, B. and Powell, G.H. (1982) Computational models for cyclic plasticity rate dependence, and creep in finite element analysis. EERC Report No. 82/26, University of California, Berkeley
  10. Mroz, Z. (1967) An attempt to describe the behavior of metals under cyclic loads using a more general work hardening model. Acta Mechanica, Vol. 7, No. 2-3, pp. 199-212 https://doi.org/10.1007/BF01176668
  11. Przemieniecki, J.S. (1968) Theory of matrix structural analysis. McGraw-Hill Book Co., New York, N.Y.
  12. Youssef, N., Bonowitz, D., and Gross, J. (1995) A survey of steel moment-resisting frame buildings affected by the 1994 Northridge earthquake. NIST Rep. No. NISTIR 5625, National Institute of Standards and Technology, United States Dept. of Commerce Technology Administration, Washington, D.C.