Abstract
The impact of snow accumulation and snowmelt in rainfall-runoff modelling was analyzed for the Soyanggang dam basin by comparing the measured and simulated discharges simulated by the NWS-PC model. Sugawara's conceptual model was used to simulate the snow accumulation and snowmelt phenomena and NWS-PC model was employed to simulate rainfall-runoff. Parameters in model calibration were estimated by the Multi-step Automated Calibration Scheme and optimized using SCE-UA algorithm in each step. The results of the model calibration and verification show that the model considering snowmelt process is better than the one without consideration of snowmelt under the performance criteria such as RMSE, PBIAS, NSE, and PME. The measured discharge time series has over 60 days of persistence. Correlograms for each simulation showed that the simulated discharge with snowmelt model reproduce the persistence closely to the measured discharge's while the one without snow accumulation and snowmelt model reproduce only 20 days of persistence. The study result indicates that the inclusion of snow accumulation and snowmelt model is important for the accurate simulation of rainfall-runoff phenomena in the Soyanggang dam basin.
소양강댐 유역의 관측유입량과 융설 모의의 포함 유무에 따른 모의 결과를 비교함으로써 적설 및 융설 모형의 필요성을 분석하였다. 사용한 융설 모형은 Sugawara 등의 개념적 융설 모형이고, 강우-유출 모형은 NWS-PC를 사용하였다. 모형의 매개변수는 다단계 자동보정법에 의해 추정하였고, 각 단계별로 SCE-UA 알고리즘에 의해 최적화되었다. 매개변수 추정시와 검증 모의에서 RMSE, PBIAS, NSE, PME 통계량은 융설을 포함한 모의가 그렇지 않은 모의보다 좋은 결과를 나타내었다. 소양강댐의 관측유입량은 약 두 달 이상의 자기상관성을 나타내었고, 융설을 포함하지 않은 경우에 모의된 유량시계열은 20일 정도의 자기상관성을 나타내었다. 융설을 포함한 경우의 모의유량 시계열은 관측 유량시계열과 유사하게 약 두 달 이상의 자기상관성을 나타내었다. 이와 같은 결과로 소양강댐 유역의 강우-유출 모의시 적설 및 융설 모형을 포함하여야 모형의 정확성을 향상시킬 수 있다.