A Fault Indicator Generation Algorithm using Phase Angle of Zero-Sequence Current in Ungrounded System

비접지 계통에서 영상전류 위상을 이용한 고장표시 생성 알고리즘

  • 임희택 (명지대학 공대 전기공학과) ;
  • 임일형 (명지대학 공대 전기공학과) ;
  • 최면송 (명지대학 공대 전기공학과) ;
  • 이승재 (명지대학 공대 전기공학과)
  • Published : 2008.07.01

Abstract

Most faults are single-phase-to-ground fault in ungrounded system. The fault currents of single-phase-to-ground are much smaller than detection thresholds of measurement devices, so detecting single-phase-to-ground faults is difficult and important in ungrounded system. This paper proposed to a FI(Fault Indicator) generation algorithm in ungrounded system. The algorithm just using line-to-line voltage and zero-sequence current detects fault line, fault phase, fault section and FI(Fault Indicator) at terminal device, This paper also proposed to application plan for this algorithm. In the case study, the proposed algorithm has been testified in demo system by Matlab/Simulink simulations.

Keywords

References

  1. Leel Ho Seol, Bok Nam Ha, Mi Ae Jeong, Moon Ho Kang, Sang Ho Lee, 'A study of line-to-ground fault solution in ungrounded network base on the distribution automatic system', KIEE summer conference, July 14-16, 2004
  2. Hong-chun Shu, Bai Xiao, 'A novel fault line selection algorithm of single-phase ground faults in ungrounded neutral system using wavelets transform', PowerCon 2002, Vol.4, pp. 2532-2536, Oct. 2002
  3. Qianli Su, XinzhouDong, Shenxing Shi, Bin Su, Jiali He, 'A new principle of fault line selection for distribution', Seventh International Conference on (IEE) Developments in Power System Protection, pp. 89-93, June 2004
  4. Chengyong Zhao, Yanfen Guo, Gengyin Li, 'The similitude power detection on single phase-to-ground fault in the non-solidly grounded system', IEEE/PES Transmission and Distribution Conference & Exhibition: Asia and Pacific Dalian, China, pp. 1-5, 2005
  5. 박영문, 김재철, 전력계통기술계산 응용, 도서출판 의제, 1998
  6. Bingyin Xu, Yongduan Xue, Jing Li, Yu Chen, 'Single phase fault detection technique based on transient current and its application in non-solid grounded network', IEE 2001 Conference in Developments in Power System Protection, No.429, 2001
  7. Z. Q. Bo, G. Weller, M. A. Redfern, 'Accurate fault location technique for distribution system using fault-generated high-frequency transient voltage signals', IEE Proceedings on Generation, Transmission and Distribution, Vol. 146, issue 1, pp. 73-79, Jan. 1999
  8. Baldwin, T.; Renovich, F., Jr.; Saunders, L.F.; L.F.; Lubkeman, D., 'Fault locating in ungrounded and high-resistance grounded systems', IEEE Transactions on Industry Applications, Vol. 37 No. 4, pp. 1152-1159, July-Aug. 2001 https://doi.org/10.1109/28.936408
  9. Baldwin, T.; Renovich, F.; Saunders, L., 'Directional ground fault indicator for high-resistance grounded systems', 2002 IEEE Industrial and Commercial Power Systems Technical Conference, pp. 103-109, 2002
  10. Baldwin, T.; Renovich, F., 'Analysis of fault locating signals for high-impedance grounded systems', IEEE Transactions on Industry Applications, Vol. 38 No. 3, pp. 810-817, May/Jun 2002 https://doi.org/10.1109/TIA.2002.1003434
  11. 하복남 외6, The Development of the New Distribution Automation System, KEPRI '98 전력연-단663, 1998
  12. In Sun Choi, Myeon Song Choi, Seong Il Lim, Seung Jae Lee, 'A new algorithm of the line to ground fault section isolation & restoration in ungrounded distribution power system', Trans. KIEE. Vol. 53A, No. 10, Oct. 2004