DOI QR코드

DOI QR Code

Slab panel vertical support and tensile membrane action in fire

  • Abu, Anthony K. (Department of Civil and Structural Engineering, University of Sheffield) ;
  • Burgess, Ian W. (Department of Civil and Structural Engineering, University of Sheffield) ;
  • Plank, Roger J. (School of Architectural Studies, University of Sheffield)
  • 투고 : 2007.11.06
  • 심사 : 2008.06.03
  • 발행 : 2008.06.25

초록

The increasing use of performance-based approaches in structural fire engineering design of multi-storey composite buildings has prompted the development of various tools to help quantify the influence of tensile membrane action in composite slabs at elevated temperatures. One simplified method which has emerged is the Bailey-BRE membrane action method. This method predicts slab capacities in fire by analysing rectangular slab panels supported on edges which resist vertical deflection. The task of providing the necessary vertical support, in practice, requires protecting a panel's perimeter beams to achieve temperatures of no more than $620^{\circ}C$ at the required fire resistance time. Hence, the integrity of this support becomes critical as the slab and the attached beams deflect, and large deflections of the perimeter beams may lead to a catastrophic failure of the structure. This paper presents a finite element investigation into the effects of vertical support along slab panel boundaries on the slab behaviour in fire. It examines the development of the membrane mechanism for various degrees of edge-beam protection, and makes comparisons with predictions of the membrane action design method and various acceptance criteria.

키워드

참고문헌

  1. Abu, A. K., Burgess, I. W. and Plank, R. J., (2006), "Effects of thermal gradients on membrane stresses in thin slabs", Proceedings of the 4th Structures in Fire Workshop, Vol. II, Aveiro, Portugal, 671-681.
  2. Abu, A. K., Burgess, I.W. and Plank, R.J. (2007), "Effects of slab panel vertical support on tensile membrane action", Proceedings of the 3rd Conference on Steel and Composite Structures (ICSCS), Manchester, 647-652
  3. ASFP (2002), Fire protection for structural steel in buildings, Association for Specialist Fire Protection
  4. Bailey, C. G. (2000), Design of Steel Structures with Composite Slabs at the Fire Limit State, Final Report No. 81415, prepared for DETR and SCI, The Building Research Establishment, Garston, UK.
  5. Bailey, C. G. (2001), "Membrane action of unrestrained lightly reinforced concrete slabs at large displacements", Eng. Struct., 23, 470-483. https://doi.org/10.1016/S0141-0296(00)00064-X
  6. Bailey C. G. (2003a), "Efficient arrangement of reinforcement for membrane behaviour of composite floors in fire conditions", J. Constr. Steel Res., 59, 931-949. https://doi.org/10.1016/S0143-974X(02)00116-5
  7. Bailey, C. G. (2003b), Large scale fire test on a composite slim-floor system, Steel and Composite Structures, 3 (3), 153-168 https://doi.org/10.12989/scs.2003.3.3.153
  8. Bailey C. G. (2004), "Membrane action of slab/beam composite floor systems in fire", Eng. Struct., 26, 1691-1703. https://doi.org/10.1016/j.engstruct.2004.06.006
  9. Bailey, C. G. and Toh, W. S. (2007), "Behaviour of concrete floor slabs at ambient and elevated temperatures" Fire Safety J., 42, 425-436 https://doi.org/10.1016/j.firesaf.2006.11.009
  10. BSI (1990), Structural use of steelwork in building - Part 3: Design in composite construction, British Standards Institute, UK
  11. BSI (2003), Structural use of steelwork in building - Part 8: Code of practice for fire resistant design, British Standards Institute, UK
  12. Cameron, N. J. K. and Usmani, A. S. (2005), "New design method to determine the membrane capacity of laterally restrained composite floor slabs in fire. Part 1: Theory and method", The Structural Engineer 83 (19), 28-33.
  13. CEN (2005), Eurocode 3: Design of Steel Structures - Part 1.2: General Rules - Structural Fire Design, European Committee for Standardization.
  14. Foster S. J., Burgess I. W. and Plank R. J. (2005) "Investigation of membrane action in model scale slabs subjected to high temperatures," Proceedings of the 4th International conference of Advances in Steel Structures, Vol. II, Shanghai, China, 933-940.
  15. Huang, Z., Burgess, I. W. and Plank, R. J. (2002), "Modelling of six full-scale fire tests on a composite building", The Structural Engineer, 80(19), 30-37.
  16. Huang, Z., Burgess, I. W. and Plank, R. J. (2003a), "Modelling membrane action of concrete slabs in composite buildings in fire. i: theoretical development", J. Struct. Eng. -ASCE, 129 (8), 1093-1102. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:8(1093)
  17. Huang, Z., Burgess, I. W. and Plank R. J. (2003b), "Modelling Membrane Action of Concrete Slabs in Composite Buildings in Fire. II: Validations", ASCE Journal of Structural Engineering, 129 (8), pp1103-1112 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:8(1103)
  18. Huang, Z., Platten, A. and Roberts, J. (1996), "Non-linear finite element model to predict temperature histories within reinforced concrete in fires", Build. and Environ, 31(2), 109-118. https://doi.org/10.1016/0360-1323(95)00041-0
  19. Martin, D. and Moore, D. (1999), "The behaviour of multi-storey steelframed buildings in fire", A European Joint Research Programme. Cardington Test Report, prepared by British Steel Plc.
  20. Martin, D.M, Kirby, B. R., O'Connor, M. A., Twilt, L. and Kruppa, J. (2001), "Behaviour of a multi-storey, steel framed building subjected to natural fire effects", Final Report of the European Commission, Directorate General for Research
  21. Newman, G. M., Robinson, J. T. and Bailey, C. G. (2006), Fire Safe Design: A New Approach to Multi-Storey Steel-Framed Buildings, Second Edition, SCI Publication P288, The Steel Construction Institute, UK
  22. Usmani, A. S., Rotter, J. M., Lamont, S., Sanad, A. M. and Gillie, M. (2001), "Fundamental principles of structural behaviour under thermal effects", Fire Safety J., 36, 721-744". https://doi.org/10.1016/S0379-7112(01)00037-6

피인용 문헌

  1. The effect of reinforcement ratios on composite slabs in fire vol.165, pp.7, 2012, https://doi.org/10.1680/stbu.11.00021
  2. Numerical analysis of partially fire protected composite slabs vol.14, pp.1, 2008, https://doi.org/10.12989/scs.2013.14.1.021