DOI QR코드

DOI QR Code

Experimental study on seismic performance of coupling beams not designed for ductility

  • Lam, S.S.E. (Department of Civil and Structural Engineering, The Hong Kong Polytechnic University) ;
  • Wu, B. (Department of Civil Engineering, South China University of Technology) ;
  • Liu, Z.Q. (School of Civil Engineering, Harbin Institute of Technology) ;
  • Wong, Y.L. (Department of Civil and Structural Engineering, The Hong Kong Polytechnic University)
  • 투고 : 2006.04.10
  • 심사 : 2007.11.27
  • 발행 : 2008.02.20

초록

Seismic performance of coupling beams not designed for ductility is examined. Eight 1:4 scale coupling beam specimens, with seven reinforced concrete sections and one composite section, were tested under cycles of push-pull action. Characteristics of the specimens include moderate shear span ratio in the range of 2.5-3.5, high main reinforcement ratio at 3-4% and small to large stirrup spacing with 90- degree hooks. All the reinforced concrete specimens failed in a brittle manner. Displacement ductility of specimens with large stirrup spacing (${\geq}$140 mm) is in the range of 3 to 5. Seismic performance of the specimens is also examined using the ultimate drift angle and the amount of energy dissipated. Correlating the test data, an empirical relationship is proposed to estimate the ultimate drift angle of a class of coupling beams considered in the study not designed for ductility.

키워드

참고문헌

  1. ACI 318-02. Building Code Requirements for Structural Concrete. Reported by ACI Committee 318, ACI
  2. Aycardi, L.E., Mander, J.B. and Reinhorn, A.M. (1994), "Seismic Resistance of Reinforced Concrete Frame Structures Designed Only for Gravity Loads, Experimental Performance of Subassemblages", ACI Struct. J., 91(5), 552-563
  3. Barney, G.B., Shiu, K.N., Rabba, B.G., Fiorato, A.E., Russell, H.G. and Corle, W.G. (1980), Behavior of Coupling Beams under Load Reversals. Research and Development Bulletin RD068.01, PCA, Research and Development/Construction Technology Laboratories
  4. Bracci, J.M. and Reinhorn, A.M. (1996), Shaking Table Testing of a 1:3 Scale R/C Frame Model. EURODYN'96
  5. Code of Practice for Structural Use of Concrete - 1987, Buildings and Lands Department, Hong Kong
  6. Durrani, A.J., Du, Y. and Luo, Y.H. (1995), "Seismic resistance of nonductile slab-column connections in existing flat-slab buildings", ACI Struct. J., 92(4), 479-487
  7. Harries, K.A., Gong, B. and Shahrooz, B.M. (2000), "Behavior and design of reinforced concrete, steel, and steel-concrete coupling beams", Earthq. Spectra, 16(4), 775-799 https://doi.org/10.1193/1.1586139
  8. Harries, K.A. (2001), "Ductility and deformability of coupling beams in reinforced concrete coupled walls", Earthq. Spectra, 17(3), 457-478 https://doi.org/10.1193/1.1586184
  9. Hindi, R.A. and Hassan, M.A. (2004), "Shear capacity of diagonally reinforced coupling beams", Eng. Struct., 27, 1437-1446
  10. Hindi, R. and Hassan, M. (2007), "Simplified trilinear behavior of diagonally reinforced coupling beams", ACI Struct. J., 199-206
  11. Kwan, A.K.H., Au, F.T.K. and Chau, S.L. (2004), "Theoretical study on effect of confinement on flexural ductility of normal and high-strength concrete beams", Mag. Concrete Res., 56(5), 299-309 https://doi.org/10.1680/macr.56.5.299.36313
  12. Lam, S.S.E., Wu, B., Wong, Y.L., Wang, Z.Y., Liu, Z.Q. and Li, C.S. (2003), "Drift capacity of rectangular reinforced concrete columns with low lateral confinement", J. Struct. Eng., ASCE, 129(6), 733-742 https://doi.org/10.1061/(ASCE)0733-9445(2003)129:6(733)
  13. Liu, Z.Q., Lam, S.S.E. and Wu, B. (2002a), Seismic Performance of Non-ductile Coupling Beams. Proc. of the Structural Engineering World Congress (SEWC 2002), Oct. 9-12, 2002, Yokohama, Japan
  14. Liu, Z.Q., Lam, S.S.E., Wu, B. and Wong, Y.L. (2002b), Ultimate Drift Ratio of Non-ductile Coupling Beams. Proc. of Advances in Building Technology (ABT2002), Dec. 4-6, 2002, Hong Kong
  15. Nakata, S., Sproul, T. and Penzien, J. (1978), Mathematical Modelling of Hysteres Loops for Reinforced Concrete Columns. Report No. UCB/EERC-78/11
  16. NZS 3101:2006: Part 1. The Design of Concrete Structures, Standards New Zealand, Wellington
  17. Pam, H.J., Su, R.K.L., Lam, W.Y., Li, J., Au, F.T.K., Kwan, A.K.H. and Lee, P.K.K. (2002), Designing Coupling Beams and Joints in Concrete Buildings for Improved Earthquake Resistance. Proc. of Recent Developments in Earthquake Engineering, HKIE Structural Division, 17 May 2002, 91-105
  18. Park, R. and Paulay, T. (1975), Reinforced Concrete Structures, John Wiley & Sons
  19. Paulay, T. (1971), "Coupling beams of reinforced concrete shear walls", J. Struct. Div., ASCE, 97(3), 843-861
  20. Paulay, T. and Binney, J.R. (1974), "Diagonally reinforced coupling beams of shear walls", Paper no 26, ACI Publication SP-42, 2, 579-598
  21. Paulay, T. (2002), "A Displacement-focused Seismic Design of Mixed Building System", Earthq. Spectra, 18(4), 689-718 https://doi.org/10.1193/1.1517066
  22. Tassios, T.P., Moretti, M. and Bezas, A. (1996), "On the behavior and ductility of reinforced concrete coupling beams of shear walls", ACI Struct. J., 93(6)
  23. Subedi, N.K. (1991a), "RC-coupled shear wall structures. I: Analysis of coupling beams", J. Struct. Eng., ASCE, 117(3), 667-680 https://doi.org/10.1061/(ASCE)0733-9445(1991)117:3(667)
  24. Subedi, N.K. (1991b), "RC-coupled shear wall structures. II: Ultimate strength calculation", J. Struct. Eng., ASCE, 117(3), 681-698 https://doi.org/10.1061/(ASCE)0733-9445(1991)117:3(681)
  25. Xiao, Y., Tomli, M. and Sakino, K. (1986), "Experimental study on design method to prevent shear failure of reinforced concrete short circular columns by confining in steel tube", Trans. Japan Concrete Inst. 8, 535-542
  26. Xu, Y.L., Ko, J.M., Chau, K.T., Lam, S.S. and Wong, Y.L. (2001), "Research of earthquake engineering in Hong Kong: current status and future challenge", Earthquake Engineering Frontiers in the New Millennium, Spencer & Hu (eds), Swet & Zeitlinger, 77-99
  27. Zhao, Z.Z. and Kwan, A.K.H. (2003), "Nonlinear Behavior of Deep Reinforced Concrete Coupling beam", Struct. Eng. Mech., 15(2), 181-198 https://doi.org/10.12989/sem.2003.15.2.181

피인용 문헌

  1. Deformability design of high-performance concrete beams vol.22, pp.9, 2013, https://doi.org/10.1002/tal.728
  2. Equivalent stress block for normal-strength concrete incorporating strain gradient effect vol.64, pp.1, 2012, https://doi.org/10.1680/macr.2012.64.1.1
  3. Strain gradient effects on flexural strength design of normal-strength concrete beams vol.22, pp.1, 2013, https://doi.org/10.1002/tal.655
  4. Improving design limits of strength and ductility of NSC beam by considering strain gradient effect vol.47, pp.2, 2013, https://doi.org/10.12989/sem.2013.47.2.185
  5. Strain gradient effects on concrete stress–strain curve vol.165, pp.10, 2012, https://doi.org/10.1680/stbu.10.00056
  6. Flexural Strength and Deformability Design of Reinforced Concrete Beams vol.14, 2011, https://doi.org/10.1016/j.proeng.2011.07.176
  7. Strain-Gradient-Dependent Stress-Strain Curve for Normal-Strength Concrete vol.16, pp.11, 2013, https://doi.org/10.1260/1369-4332.16.11.1911
  8. Normalised rotation capacity for deformability evaluation of high-performance concrete beams vol.1, pp.3, 2008, https://doi.org/10.12989/eas.2010.1.3.269
  9. Maximum concrete stress developed in unconfined flexural RC members vol.8, pp.2, 2008, https://doi.org/10.12989/cac.2011.8.2.207
  10. Concurrent flexural strength and deformability design of high-performance concrete beams vol.40, pp.4, 2008, https://doi.org/10.12989/sem.2011.40.4.541