DOI QR코드

DOI QR Code

지역 극좌표계를 이용한 임의 형상 자유단 평판의 자유진동해석을 위한 무요소법 개발

Development of Meshless Method for Free Vibration Analysis of Arbitrarily Shaped Free Plates Using Local Polar Coordinates

  • 강상욱 (한성대학교 기계시스템공학과) ;
  • Kang, Sang-Wook ;
  • Atluri, S. N. (Department of Mechanical and Aerospace Engineering, University of California)
  • 발행 : 2008.06.20

초록

A new meshless method for obtaining natural frequencies of arbitrarily shaped plates with the free boundary condition is introduced in the paper. In order to improve the characteristics of convergence and accuracy of the method, a special local polar coordinates system is devised and located for each of nodes distributed along the boundary of the plate of interest. In addition, a new way of decreasing the size of the system matrix that gives natural frequencies of the plate is employed to reduce the amount of numerical calculations, which is needed for computing the determinant of the system matrix. Finally the excellence of the characteristics of convergence and accuracy of the method is shown in several case studies, which indicate that natural frequencies by the proposed method are very accurate and converged swiftly to exact values as the number of boundary nodes increases.

키워드

참고문헌

  1. Bathe, K., 1982, 'Finite Element Procedures in Engineering Analysis', New Jersey : Prentice-Hall
  2. Brebbia, C. A., Telles, J. C. F. and Wrobel, L. C. 1984, 'Boundary Element Techniques', New York: Springer-Verlag
  3. Kang, S. W. and Lee, J. M., 1999, 'Vibration Analysis of Arbitrarily Shaped Membrane Using Non-dimensional Dynamics Influence Function', Journal of Sound and Vibration, Vol. 221, pp. 117-132 https://doi.org/10.1006/jsvi.1998.2009
  4. Kang, S. W. and Lee, J. M. 2000, 'Application of Free Vibration Analysis of Membranes Using the Non-dimensional Dynamics Influence Function', Journal of Sound and Vibration, Vol. 234, No. 3, pp. 455-470 https://doi.org/10.1006/jsvi.1999.2872
  5. Kang, S. W. and Lee, J. M., 2001, 'Free Vibration Analysis of Arbitrarily Shaped Plates with Clamped Edges Using Wave-type Functions', Journal of Sound and Vibration, Vol. 242, No. 1, pp. 9-26 https://doi.org/10.1006/jsvi.2000.3347
  6. Kang, S. W. 2002, 'Free Vibration Analysis of Arbitrarily Shaped Plates with a Mixed Boundary Condition Using Non-dimensional Dynamic Influence Functions', Journal of Sound and Vibration Vol. 256, No. 3, pp. 533-549 https://doi.org/10.1006/jsvi.2002.5009
  7. Kang, S. W., et al., 2003, 'Free Vibration Analysis of Arbitrarily Shaped Plates With Free Edges Using Non-dynamic Influence Functions', Transactions of the Korea Society for Noise and Vibration Engineering, Vol. 13, No. 10, pp. 821-827 https://doi.org/10.5050/KSNVN.2003.13.10.821
  8. Kang, S. W., 2007, 'Free Vibration Analysis of Arbitrarily Shaped Polygonal Plates With Free Edges by Considering the Phenomenon of Stress Concentration at Corners', Transactions of the Korea Society for Noise and Vibration Engineering, Vol. 17, No. 3, pp. 220-225 https://doi.org/10.5050/KSNVN.2007.17.3.220
  9. Meirovitch, L., 1967, Analytic Methods in Vibrations, New York: Nacmillan Publishing, pp. 179-182
  10. Yee, H. Y., 1966, 'On Determination of Cutoff Frequencies of Waveguides with Arbitrary Cross-section', Proceedings of the Institution of Electrical Engineers, Vol. 54, pp. 64-71
  11. Yee, H. Y. and Audeh, N. F., 1966, 'Cutoff Frequencies of Eccentric Waveguides', Institute of Electrical and Electronic Engineers, Transactions on Microwave Theory and Techniques MTT-14, pp. 487-493