200 kV 용량형 분압기 2대를 이용한 교류 고전압 측정범위 확장

Measurement Range Extension of AC High Voltage using two 200 kV Capacitive Dividers

  • 발행 : 2008.03.01

초록

The output voltage value of AC high voltage source has been usually obtained by multiplying low voltage value measured at both terminals of low voltage resistor by the dividing ratio of the high voltage capacitive divider. From the dividing ratio determined of each 200 kV capacitive divider, we have developed step-up method for measuring the output voltage up to 400 kV using two same type of 200 kV capacitive dividers connected in series. The theoretical dividing ratio of 400 kV capacitive dividers connected in series coincides with that of manufacturer's certification within measurement uncertainty. Thus, this developed step-up method makes it possible to extend the range of output voltage from 200 kV to 400 kV. Furthermore, The dividing ratio of divider under test obtained using this step-up method is consistent with that obtained using one 200 kV high voltage divider within corresponding uncertainties.

키워드

참고문헌

  1. International Electrotechnical Commission, IEC 60, 1987
  2. William E. Anderson "A Calibration Service for Voltage Transfomers and High-Voltage Capacitors" NBS Measurement Services Special Publication 250-33, 1988
  3. R. Krump, J. Weltgen, "Investigation and calibration of AC-voltage divider capacitors in connection with the accreditation of the HV Laboratory" Proceedings ERA European Conference and Exhibition on High Voltage Measurement and Calibration, ERA 94-0776, 1994
  4. T. Tadokoro, T. Tsuchiyama, "AC voltage divider test set" JEMIC Technical Report, vol. 37, no. 3, pp 45-47, 2002
  5. D. I. Nefed'ev, "Equipment for checking high-voltage measuring transformers" Measurement Techniques, vol. 48, no. 8, pp 812-816, 2005 https://doi.org/10.1007/s11018-005-0226-6
  6. 권성원, 김문석, 정재갑, 이성하, 김명수, "전압변성기용 부담특성 정밀분석용 자동 평가 시스템의 개발" 대한전기학회지, vol. 54C, no. 10, pp 457-464, 2005
  7. 강전홍, 정재갑, 류제천, 이상화, 김규태, 김명수, 한상옥, "평행판 전극과 전기장 센서를 이용한 교류 고전압 발생원의 측정범위 확장기술 개발" 대한전기학회지, vol. 55C, no. 9, pp 446-451, 2006
  8. DKD Calibration Certificate of 400 kV divider, Calibration mark 555, DKD-K-17701, 06-10, 2006