Abstract
Several experimental techniques for identifying the noise sources distributed over a moving vehicle have been developed recently and are used to design a low noise vehicle. The beamforming method, which uses phase information between several microphones to localize the source position, is proved to be one of the promising techniques applicable even under complicated test environments. In this study a beamforming algorithm is developed and applied to measure the dominant noise sources on a passenger car passing by. Unlike the acoustic signals from a stationary noise source, the sound generated from a moving source is distorted due to the Doppler effects. The information about the speed and relative position of the vehicle are used to eliminate the Doppler effects from the measured acoustic signal by using a de-Dopplerization algorithm. The noise generated from a moving vehicle can be grouped in many ways, however, tire noise and the noise generated from the engine are distinguishable at the speeds being tested.
최근에 들어 이동하는 운송체의 외부에서 발생하는 소음의 위치를 판별하는 몇가지 방법들이 개발되었고, 운송체의 저소음화 설계과정에 적용되어 지고 있다. 빔형성법은 여러개의 마이크로폰으로부터 측정된 신호의 위상차를 이용하여 소음원의 위치를 판정하는 기법으로서 비교적 복잡한 환경하에서도 좋은 결과를 얻을 수 있는 기법으로 확인되고 있다. 본 연구에서는 빔형성법을 적용하여 승용차가 주행할 때 발생하는 소음원의 위치를 판별하는 연구를 수행하였다. 정지된 소음원의 경우와는 달리 이동하는 소음원의 경우는 도플러 효과에 의하여 측정된 신호가 변형되는데, 운송체의 움직이는 속도와 마이크로폰들과의 상대적 거리차를 이용하여 보정해주는 방법을 적용하였다. 움직이는 운송체에서 발생되는 소음원은 여러 가지로 분류될 수 있는데, 본 실험에서 수행된 조건하에서는 이중 타이어 소음과 엔진에서 발생하는 소음이 가장 큰 것으로 측정되었다.