참고문헌
- Miller, K., Sisco, J., Nugent, N., and Anderson, W., 'Combustion Instability with a Single-element Swirl Injector,' Journal of Propulsion and Power, Vol. 23, No. 5, 2007, pp.1102-1112 https://doi.org/10.2514/1.26826
- 김정수, '단일액체추진제 소형 추력기의 진공 환경 연소시험 및 성능특성 평가,' 한국추진공학회지, 제8권, 제4호, 2004, pp.84-90
- Gunder, D. F. and Friant, D. R., 'Stability of Flow in a Rocket Motor,' Journal of Applied Mechanics (ASME), Vol. 17, 1950, pp.327-333
- Tamaki, N., Shimizu, M., Nishida, K., and Hiroyasu, H., 'Effects of Cavitation and Internal Flow on Atomization of a Liquid Jet,' Atomization and Sprays, Vol. 8, No. 2, 1998, pp.179-197 https://doi.org/10.1615/AtomizSpr.v8.i2.30
- Hiroyasu, H., 'Spray Break-up Mechanisms from the Hole-type Nozzle and Its Applications,' Atomization and Sprays, Vol. 10, No. 3-5, 2000, pp.511-527
- Kato, M., Kano, H., Date, K., Oya, T., and Niizuma, K., 'Flow Analysis in Nozzle Hole in Consideration of Cavitation,' 1997, SAE Paper 970052
- Kent, J. C. and Brown, G. M., 'Nozzle Exit Flow Characteristics for Square-edged and Rounded Inlet Geometries,' Combustion Science and Technology, Vol. 30, No. 1-6, 1983, pp.121-132 https://doi.org/10.1080/00102208308923615
- Ganippa, L. C., Bark, G., Andersson, S., and Chomiak, J., 'Cavitation: A Contributory Factor in the Transition from Symmetric to Asymmetric Jets in Cross-flow Nozzles,' Experiments in Fluids, Vol. 36, No. 4, 2004, pp.627-634 https://doi.org/10.1007/s00348-003-0736-4
- Baumgarten, C., Stegemann, J., and Merker, G. P., 'A New Model for Cavitation Induced Primary Break-up of Diesel Sprays,' Proceeding of 18th ILASS Europe Conference, 2002, pp.15-20, Zaragoza, Spain
- Koo, J. Y., 'The Effects of Injector Nozzle Geometry and Operating Pressure Conditions on the Transient Fuel Spray Behavior,' KSME International Journal, Vol. 17, No. 3, 2003, pp.617-625
- Ryan, H. M., Anderson, W. E., Pal, S., and Santoro, R. J., 'Atomization Characteristics of Impinging Liquid Jets,' Journal of Propulsion and Power, Vol. 11, No. 1, 1995, pp.135-145 https://doi.org/10.2514/3.23851
- Reitz, R. D. and Bracco, F. V., 'Mechanism of Atomization of a Liquid Jet,' Physics of Fluids, Vol. 25, No. 10, 1982, pp.1730-1742 https://doi.org/10.1063/1.863650
- Bayvel, L. and Orzechowski, Z., Liquid Atomization, Taylor & Francis Inc, 1993
- 김진석, 김정수, 김성초, 박정, '액체추진제 추력기의 인젝터 분무 거동에 대한 실험적 연구,' 한국항공우주학회지, 제35권, 제9호, 2007, pp.799-804 https://doi.org/10.5139/JKSAS.2007.35.9.799
- 김진석, 정훈, 김정수, 김성초, '준 3차원 공간분포 계측에 의한 액체 추력기 인젝터의 분무거동 해석,' 한국추진공학회 춘계학술대회, 2008, pp.141-144
- 정훈, 김정수, 김성초, 박정, '소형 액체로켓엔진 인젝터의 분무 분열특성에 대한 연료분사압력의 영향,' 한국추진공학회지, 제11권, 제3호, 2007, pp.50-57
- 정훈, 김진석, 김정수, 박정, '소형 액체로켓엔진 인젝터 분무의 분사압력 변이에 따른 미립화 특성,' 한국추진공학회 춘계학술대회, 2008, pp.125-128
- Schmidt, E. W., Hydrazine and Its Derivatives: Preparation, Properties, Applications, 2nd Ed., John Wiley & Sons Inc., New York, 2001
- Tropea, C., Xu, T. -H., Onofri, F., Gréhan, G., and Haugen, P., 'Dual-mode Phase Doppler Anemometry,' Proceeding of 7th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 1994, Lisbon, Portugal
- 김정수, '1-lbf급 단일액체추진제 로켓엔진의 추력 성능,' 한국추진공학회지, 제8권, 제2호, 2004, pp.32-38
- Dexter, C. E., Fisher, M. F., Hulka, J. R., Denisov, K. P., Shibanov, A. A., and Agarkov, A. F., 'Scaling Techniques for Design, Development, and Test,' Liquid Rocket Thrust Chambers: Aspects of Modeling, Analysis, and Design, AIAA, Washington, D. C., 2004
- Zhang, Z. and Ziada, S., 'PDA Measurements of Droplet Size and Mass Flux in the Three-dimensional Atomisation Region of Water Jet in Air Cross-flow,' Experiments in Fluids, Vol. 28, No. 1, 2000, pp.29-35 https://doi.org/10.1007/s003480050004
- Lefebvre, A. H., Atomization and Sprays, Hemisphere Publishing Corp., New York, 1989. p.370
- Kim, J. S., Kim, J. S., Jung, H., Park, J., Kim, S., and Jang, K. W., 'A Study on the Spray Characteristics of a Liquid-propellant Thruster Injector by PIV/PDA Optical Measurements,' 5th Joint ASME/JSME Fluids Engineering Conference, 2007, FEDSM2007-37105, San Diego, CA, USA