Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Freeze Casting of Aqueous Alumina/Silicon Carbide Slurries and Fabrication of Layered Composites: (II) Microstructure and Mechanical Properties of Layered Composites

수성 알루미나/탄화규소 슬러리의 동결주조와 층상복합체의 제조: (II) 층상 복합체의 미세구조와 기계적 성질

  • Yang, Tae-Young (School of Materials Science and Engineering, Pusan National University) ;
  • Cho, Yong-Ki (School of Materials Science and Engineering, Pusan National University) ;
  • Kim, Young-Woo (Functional Materials Research Team, Research Institute of Industrial Science and Technology) ;
  • Yoon, Seog-Young (School of Materials Science and Engineering, Pusan National University) ;
  • Park, Hong-Chae (School of Materials Science and Engineering, Pusan National University)
  • 양태영 (부산대학교 재료공학부) ;
  • 조용기 (부산대학교 재료공학부) ;
  • 김영우 (포항산업과학연구원 기능성재료연구팀) ;
  • 윤석영 (부산대학교 재료공학부) ;
  • 박홍채 (부산대학교 재료공학부)
  • Published : 2008.02.29
Download PDF
⟨ Previous Next ⟩

Abstract

Symmetric three layer composites have been prepared by freeze casting and then pressureless sintered at $l700-1800^{\circ}C$ in $N_2$ gas atmosphere. The relative sintered density of multilayer composites having microstructural characteristics of later intermediate-stage densification increased with sintering temperature and reached about 95% theoretical value at $1800^{\circ}C$. Although the indentation strength of the multilayer composites was generally reduced with increasing Vickers indentation load up to 294N, the damage resistance of multilayer composites was superior compared to monolithic layer 95AL/5SN material. The three-point bend strength of the layered materials remained at the values 266-298 MPa after indentation with a load of 49N, while that of the monolithic 95AL/5SN material was 219 MPa. The fracture toughness of the multilayer material was $5.4-6.6\;MPa\;m^{1/2}$.

Keywords

References

  1. F. F. Lange, "Powder Processing Science and Technology for Increased Reliability," J. Am. Ceram. Soc., 72 3-6 (1989) https://doi.org/10.1111/j.1151-2916.1989.tb05945.x
  2. T. S. Yeh and M. D. Sacks, "Low-Temperature Sintering od Alumina," J. Am. Ceram. Soc., 71 841-44 (1988) https://doi.org/10.1111/j.1151-2916.1988.tb07533.x
  3. M. P. Harmer, H. M. Chan, and G. A. Miller, "Unique Opportunities for Microstructural Engineering with Duplex and laminar Ceramic Composites," J. Am. Ceram. Soc., 75 1715-28 (1992) https://doi.org/10.1111/j.1151-2916.1992.tb07188.x
  4. O. Sbaizero and E. Lucchini, "Influence of Residual Stresses on the Mechanical Properties of a Layered Ceramic Composites," J. Eur. Ceram. Soc., 16 813-18 (1996) https://doi.org/10.1016/0955-2219(96)00005-2
  5. H. Wang and X. Hu, "Surface Properties of Ceramic Laminates Fabricated by Die-Pressinf," J. Am. Ceram. Soc., 79 553-56 (1996) https://doi.org/10.1111/j.1151-2916.1996.tb08167.x
  6. C. Hillman, Z. Suo, and F. F. Lange, "Cracking of Laminates Subjected to Biaxial Tensile Stresses," J. Am. Ceram. Soc., 79 2127-33 (1996) https://doi.org/10.1111/j.1151-2916.1996.tb08946.x
  7. R. Lakshmininarayanan and D. K. Shetty, "Toughening of Layered Ceramic Composites with Residual Surface Compression," J. Am. Ceram. Soc., 79 79-87 (1996) https://doi.org/10.1111/j.1151-2916.1996.tb07883.x
  8. R. A. Cutler, I. D. Bright, A. V. Virkar, and D. K. Shetty, "Strength Improvement in Transformation Toughened Alumina by Selective Phase Transformation," J. Am. Ceram. Soc., 70 714-18 (1987) https://doi.org/10.1111/j.1151-2916.1987.tb04869.x
  9. B. R. Lawn and E. R. Fuller, "Equilibrium Penny-Like Cracks in Indentation Fracture," J. Mater. Sci., 10 2016-24 (1975) https://doi.org/10.1007/BF00557479
  10. S. W. Sofie and F. Dogan, "Freeze Casting of Aqueous Alumina Slurries with Glycerol," J. Am. Ceram. Soc., 84 1459-64 (2001) https://doi.org/10.1111/j.1151-2916.2001.tb00860.x
  11. J. G. Lee, Sintering of Ceramics; pp. 101-09, Bando Press, Seoul, 1994