References
- Noordin, M. Y., Venkatesh, V. C., Sharif, S., Elting, S. and Abdullah, A., "Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel," Journal of Material Processing Technology, Vol. 145, No. 1, pp. 46-58, 2004 https://doi.org/10.1016/S0924-0136(03)00861-6
- Heo, S. J., "Machining Characteristics of Cemented Carbides in Micro Cutting within SEM," International Journal of Precision Engineering and Manufacturing, Vol. 5, No. 3, pp. 35-42, 2004
- Trent, E. M. and Wright, P.K., "Metal Cutting," Butterworth-Heinemann, pp. 9-95, 2000
- Jung, J. W., Ko, S. H., Jeong, Y. H., Min, B. K. and Lee, S. J., "Estimation of Material Removal Volume of a Micro-EDM Drilled Hole Using Discharge Pulse Monitoring," International Journal of Precision Engineering and Manufacturing, Vol. 8, No. 4, pp. 45-49, 2007
- Kalpakjian, S., "Manufacturing Engineering and Technology," Addison-Wesley Publishing Company, pp.-635, 1989
- Kim, K. W. and Ahn, T. K., "Force Prediction and Stress Analysis of a Twist Drill from Tool Geometry and Cutting Conditions," International Journal of Precision Engineering and Manufacturing, Vol. 6, No. 1, pp. 65-72, 2005
- Haci, S., Faruk, U. and Yaldiz, S., "Investigation of the effect of rake angle and approaching angle on main cutting force and tool tip temperature," International Journal of Machine Tools and Manufacture, Vol. 46, Issue 2, pp. 132-141, 2006 https://doi.org/10.1016/j.ijmachtools.2005.05.002
- Chou, Y. K., Evans, C. J. and Barash, M. M., "Experimental investigation on cubic boron nitride turning of hardened AISI 52100 steel," Journal of Material Processing Technology, Vol. 134, Issue 1, pp. 1-9, 2003 https://doi.org/10.1016/S0924-0136(02)00070-5
- Thiele, J. D. and Melkote, S. N., "Effect of cutting edge geometry and workpiece hardness on surface generation in the finish hard turning of AISI 52100 steel," Journal of Material Processing Technology, Vol. 94, Issues 2-3, pp. 216-226, 1999 https://doi.org/10.1016/S0924-0136(99)00111-9
- Guo, Y. B. and Liu, C. R., "Mechanical properties of hardened AISI 52100 steel in hard machining processes," Journal of Manufacturing Science and Engineering, Vol. Issue 1, pp.-9, 2002
- Liang, M., Mgwalu, M. and Zuo, M., "Integration of cutting parameters selection and tool adjustment decisions for multipass turning," International Journal of Advanced Manufacturing Technology, Vol. 17, No. 12, pp. 861-869, 2001 https://doi.org/10.1007/s001700170097
- Chandra, M. R. G., Komaraiah, M., Kamala, V., Prashanth, J. P. and Bala, K. K., "Condition monitoring of cutting force and power in a turning operation with tool wear," Sixteenth National Convention of Mechanical Engineers and National Seminar on Future Trends in Mechanical Engineering, pp. 546-551, 2000
- Miller, M. R., Mulholland, G. and Anderson, C., "Experimental cutting tool temperature distributions," Journal of Manufacturing Science and Engineering, Vol.Issue 4, pp. 667-673, 2003
- Outeiro, J. C., Umbrello, D. and Saoubi, R. M., "Experimental and numerical modeling of the residual stresses induced in orthogonal cutting of AISI 316 L steel," International Journal of Machine Tool and Manufacturing, Vol. 46, Issue 14, pp. 1786-1794, 2006 https://doi.org/10.1016/j.ijmachtools.2005.11.013
- Feng, C. X., "An experimental study of the impact of turning parameters on surface roughness," Proceedings of the Industrial Engineering Research Conference, No. 2036, pp. 1-7, 2001