References
- Rodgers, C. and Sapiro, L., 1971, 'Design Considerations for High-Pressure Ratio Centrifugal Compressor,' ASME Paper 71-GT-91
- Beheshti, B. H., Teixeira, J. A., Ivey, P.C., Ghorbanian, K. and Farhanieh, B., 2004, 'Parametric Study of Tip Clearance Casing Treatment on Performance and Stability of a Transonic Axial Compressor,' Journal of Turbomachinery, Vol. 126 https://doi.org/10.1115/1.1791643AdditionalInformation
- Jang, C. M. and Kim, K. Y., 2007, 'Applications of Numerical Optimization Techniques to Design of Axial Compressor Blades,' Journal of Aerospace Power, Vol. 22, No. 4, pp. 29-36
- Benini, E., 2004, 'Three-Dimensional Multi- Objective Design Optimization of a Transonic Compressor Rotor,' Journal of Propulsion and Power, Vol. 20, No. 3
- Seo, S. J., Choi, S. M. and Kim, K. Y., 2006, 'Design of An Axial Flow Fan with Shape Optimization,' Trans. of the KSME, Series B, Vol. 30, No. 7, pp. 603-611 https://doi.org/10.3795/KSME-B.2006.30.7.603
- Krain, H., Karpinski, G. and Beversdorff, M., 2001, 'Flow Analysis in a Transonic Centrifugal Compressor Rotor Using 3-Component Laser Velocimetry,' ASME Paper No. 2001-GT-0315
- Kerrebrock, J. L, 1981, 'Flow in Transonic Compressors,' AIAA Journal, Vol. 19, No. 1, pp. 4-19 https://doi.org/10.2514/3.50919
- Dunker, R. J., Strinning, D. E. and Weyer, H. B., 1977, 'Experimental Study of the Flow Field Within a Transonic Axial Compressor Rotor by Laser Velocimetry and Comparison with Through-Flow Calculations,' ASME Paper 77-GT-28
- Dunham, J., 1998, 'CFD Validation for Propulsion System Components,' AGARD Advisory Report 355, ISBN 92-836-1075-X
- Reid, L. and Moore, R. D., 1978, 'Design and Overall Performance of Four Highly-Loaded, High Speed Inlet Stages for an Advanced, High- Pressure -Ratio Core Compressor,' NASA TP- 1337
- Samad, A., Kim, K. Y., Goel, T., Haftka, R, T. and Shyy, W., 2007, Multiple Surrogate Modeling for Axial Compressor Blade Shape Optimization, Journal of Propulsion and Power (Accepted for Publication)
- Yang, L., Ouyang, H. and Hui, D. Z., 2007, 'Optimization Design and Experimental Study of Low-Pressure Axial Fan with Forward-Skewed Blades,' International Journal of Rotary Machinery, Vol. 2007, Article ID 85275, 10 Pages, Doi: 10.11 55/2007/85275 https://doi.org/10.1155/2007/85275
- Pierret, S., Coelho, R. F. and Kato, H., 2007, 'Multidisciplinary and Multiple Operating Points Shape Optimization of Three-dimensional Compressor Blades,' Structural and Multidisciplinary Optimization, Vol. 33, No. 1 https://doi.org/10.1007/s00158-006-0033-y
- Oyama, A., Liou, M. S. and Obayashi, S., 2004, 'Transonic Axial-Flow Blade Optimization: Evolu tionary Algorithms/ Three-Dimensional Navier- Stoke Solver,' Journal of Propulsion and Power, Vol. 20, No. 4, pp. 612-619 https://doi.org/10.2514/1.2290
- Chen, N., Zhang, H., Xu, Y. and Huang, W., 2007, 'Blade Parameterization and Aerodynamic Design Optimization for a 3D Transonic Compressor Rotor,' Journal of Thermal Science, Vol. 16, No. 2 https://doi.org/10.1007/s11630-007-0105-3
- Chen, N. X., Zhang, H. W., Du, H., Xu, Y. J. and Huang, W. G., 2005, 'Effect of Maximum Camber Location on Aerodynamic Performance of Transonic Compressor Blades,' ASME Turbo Expo 2005, Nevada, USA, GT2005-68541
- Jang, C. M., Li, P. and Kim, K. Y., 2006, 'Optimization of Blade Sweep of NASA Rotor 37,' Trans. of the KSME, Series B, Vol. 30, No. 7, pp. 622-629 https://doi.org/10.3795/KSME-B.2006.30.7.622
-
JMP
$\circledR$ 5.1, 2004, SAS Institute, Inc. - Samad, A., Shin, D. Y., Kim, K. Y., Goel, T. and Haftka R, T., 2007, 'Surrogate Modeling for Optimization of a Dimpled Channel to Enhance Heat Transfer Performance,' Journal of Thermophysics and Heat Transfer, Vol. 21, Number 3, pp. 667-670 https://doi.org/10.2514/1.30211
- Myers, R. H. and Montgomery, D. C., 1995, Response Surface Methodology-Process and Product Optimization Using Designed Experiments, John Wiley & Sons, Inc., New York
- Orr, M. J. L., 1996, Introduction to Radial Basis Neural Networks, Center for Cognitive Science, Edinburgh University, Scotland, UK. http://anc. ed.ac.uk/ RBNN/
- Martin, J. D. and Simpson, T. W., 2005, 'Use of Kriging Models to Approximate Deterministic Computer Models,' AIAA Journal, Vol. 43, No. 4, pp. 853-863 https://doi.org/10.2514/1.8650
- Goel, T., Haftka, R., Shyy, W. and Queipo, N., 2007, 'Ensemble of Surrogates,' Structural and Multidisciplinary Optimization, Vol. 33. No. 3, pp. 199-216 https://doi.org/10.1007/s00158-006-0051-9
-
MATLAB
$\circledR$ , 2004, The Language of Technical Computing, Release 14, The MathWorks Inc - ANSYS CFX-11.0, 2006, ANSYS Inc
- Wennerstrom, A. J., 2000, Design of Highly Loaded Axial-Flow Fans and Compressors, Concepts ETI, pp. 61-67
- Ji, L., Chen, J. and Lin, F., 2005, 'Review and Understanding on Sweep in Axial Compressor Design,' ASME Turbo Expo 2005, Reno-Tahoe, Neveda, USA, Paper No. GT2005-68473
Cited by
- vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.065
- High-Efficiency Design of a Ventilation Axial-Flow Fan by Using Weighted Average Surrogate Models vol.35, pp.8, 2011, https://doi.org/10.3795/KSME-B.2011.35.8.763