대한기계학회논문집A (Transactions of the Korean Society of Mechanical Engineers A)

  • 제32권4호
  • /
  • Pages.310-318
  • /
  • 2008
  • /
  • 1226-4873(pISSN)
  • /
  • 2288-5226(eISSN)
대한기계학회 (The Korean Society of Mechanical Engineers)
권호 표지
DOI QR코드

DOI QR Code

보행공간과 안정성 향상을 위한 병렬기구 보행로봇의 설계

Design of Parallel Typed Walking Robot for Improvement of Walking Space and Stability

  • 김치효 (창원대학교 메카트로닉스공학부) ;
  • 박근우 (창원대학교 메카트로닉스연구원) ;
  • 김태성 (창원대학교 메카트로닉스연구원) ;
  • 이민기 (창원대학교 대학원 제어계측공학과)
  • 발행 : 2008.04.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents a parallel typed walking robot to improve walking space and stability region. The robot is designed by inserting an intermediate mechanism between upper leg mechanism and lower leg mechanism. The leg mechanism is composed of three legs and base, which form a parallel mechanism with ground. Seven different types of walking robot are invented by combining the leg mechanisms and an intermediate mechanism. Topology is applied to design the leg mechanism. A motor vector is adopted to determine Jacobian and a wrench vector is used to analyze dynamics of the robot. We explore the stability region of the robot from the reaction force of legs and compute ZMP including the holding force to contact the foot to a wall. This investigates a walking stability when the robot walks on the ground as well as on the wall. We examine the walking space generated by support legs and by swing legs. The robot has both a large positional walking space and a large orientational walking space so that it can climb from a floor up to a wall.

키워드

참고문헌

  1. Garcia, E. and de Santos, P., Gonzalez, 2006, 'On the Improvement of Walking Performance in Natural Environments by a Compliant Adaptive Gait,' IEEE Transactions on Robotics, Vol. 22, No. 6, pp. 1240-1253 https://doi.org/10.1109/TRO.2006.884343
  2. Qiang Huang, Kazuhito Yokoi, Shuuji Kajita, Kenji Kaneko, Hirohiko Arai, Noriho Koyachi and Kazuo Tanie, 2001, 'Planning Walking Patterns for a Biped Robot,' IEEE Transactions on robotics and automation, Vol. 17, No. 3, pp. 280-289 https://doi.org/10.1109/70.938385
  3. Dunlop, G. Reg, 2003, 'Foot Design for a Large Walking Delta Robot,' Experimental Robotics VIII, STAR 5, pp. 602-611 https://doi.org/10.1007/3-540-36268-1_55
  4. Yusuke Ota, Kan Yoneda, Fumitoshi Ito, Shigeo Hirose and Yoshihiko Inagaki, 2001, 'Design and Control of 6-DOF Mechanism for Twin-Frame Mobile Robot,' Autonomous Robots, Vol. 10, No. 3, pp. 297-316 https://doi.org/10.1023/A:1011287810340
  5. Lee, M. K. and Kim, T. S., 2003, 'Constraint Operator for the Kinematic Calibration of a Parallel Mechanism,' KSME Int. J., Vol. 17, No. 1, pp. 23-31 https://doi.org/10.1007/BF02984282
  6. Tae Sung Kim, Kun Woo Park and Min Ki Lee, 2006, 'Study on Observability of a Parallel-Typed Machining Center Using a Single Planar Table and Digital Indicators,' IEEE Int. J. Mechanism and Machine Theory, Vol. 41, No. 10, pp. 1147-1156 https://doi.org/10.1016/j.mechmachtheory.2005.12.005
  7. Kim, T. S., Park, K. W., Kim, C. H., Park, J. H. and Lee, M. K., 2005, 'Development of a Parallel Typed Robot with a Sensor less Observer for Harbor Construction,' IEEE Int. Conf. on Information Acquisition, pp. 187-192
  8. Raghavan, M., l993, 'The Stewart Platform of General Geometry has 40 Configurations,' ASME J. of Mech. Design, Vol. 115, pp. 277-282 https://doi.org/10.1115/1.2919188
  9. Codourey, A., 1998, 'Dynamic Modeling of Parallel Robots for Computed-Torque Control Implementation,' Int. J. Robot. Res., vol. 17, No. 12, pp. 1325-1336 https://doi.org/10.1177/027836499801701205
  10. Luh, J. Y. S., Walker, M. W. and Paul, R. P., 1980, 'On-Line Computational Scheme for Mechanical Manipulators,' ASME J. Dynam. Syst. Meas. Contr., Vol. 102, pp. 468-474
  11. Hunt, K. H., 1978, 'Kinematic Geometry of Mechanisms,' Oxford Univ. Press