DOI QR코드

DOI QR Code

The Vibration Characteristic of Optimizing Snubber of Reciprocating Type Hydrogen Compressor for Pressure Loss Reduction

압력 손실을 줄이기 위해 최적화된 왕복동식 수소 압축기용 완충기의 진동 특성 분석

  • 김원철 (경상대학교 기계항공공학부.해양산업연구소) ;
  • 김효중 (경상대학교 대학원 정밀기계공학과) ;
  • 정재환 (경상대학교 대학원 정밀기계공학과) ;
  • 장용석 (경상대학교 대학원 정밀기계공학과) ;
  • 최병근 (경상대학교 기계항공공학부.해양산업연구소)
  • Published : 2008.11.30

Abstract

The reciprocating type hydrogen compressor has a pulsation due to the reciprocative characteristics which results in noise and vibration. Snubber is installed for the relaxation of pulsation, but it causes reduction of compressor efficiency because of pressure loss. Five types of snubber were modeled for the numerical investigation of the effect of the relative position of inlet and outlet and buffer angle on the pulsation amplitude and pressure loss. MSC/NASTRAN is used as a numerical tool to identify the vibration characteristic of each type. Frequency responses in forced vibration mode are compared for various cases and buffer angles.

Keywords

References

  1. Wanda Ali Akbar, "A Study on High-Pressured Gas Flow inside buffers of Reciprocating Hydrogen Compressor System", the Degree of Master, Gyeongsang university, pp. 95-102, 2007
  2. 심규진, "왕복동 수소압축기 스너버의 유동특성 및 최적설계에 관한연구", 박사학위논문, 경상대학교, pp.136-143, 2007
  3. Kyujin Sim, C. S. Yi, Wanda Ali Akbar, H. S. Jung, H. M. Jung and M. G. "CFD Anlysis on the Without-Snubber of Reciprocation Hydrogen Compresser", Proceedings of the KSME Gyeongnam Spring Meeting 2006, pp. 187-192, 2006
  4. Kyujin Sim, C. S. Yi, Wanda Ali Akbar, H. S. Jung, H. M. Jung and M. G. "Numerical Analysis on the Pressure Characteristics in a Snubber for Hydrogen Compressor", J. of The Korean Society for Power System Engineering Vol. 1, No. 2, pp. 76-81, 2007
  5. B. S. Yang, Actuality of equipment diagnosis by vibration's law, Ilo. P. 240-241, Korea, 1994
  6. MSC.Software Corporation. 2004. MSC.Nastran Quick Reference Guide. MSC.Software Corporation