Method for Safety-Decision to Apply International Standard Grounding Systems to Domestic Power System by Computer Simulation

국제 규격 접지시스템의 국내 적용을 위한 시뮬레이션 기반의 안전도 평가 방안

  • 이순 (연세대 공대 전기전자공학부) ;
  • 김정훈 (홍익대 공대 전자전기공학부) ;
  • 박정욱 (연세대 공대 전기전자공학부)
  • Published : 2008.03.01

Abstract

To apply the appropriate new grounding system to domestic power system, safety has to be guaranteed under the given circumstances. It is not possible to decide the safety of grounding systems by the experimental test because safety experiments directly relate to the human life and the installed electric machines. Therefore, the computer simulation program to decide the safety of grounding systems based on the IEC standard systems, has to be developed. This paper proposes the computer simulation based method to decide the safety of grounding system with the concepts of touch voltage, step voltage, human resistivity, and applied electric current according to the several conditions of human body located in the corresponding grounding systems. The proposed method is implemented by Matlab/Simulink and Visual C++ programming tools for its visualization.

Keywords

References

  1. 대한전기협회, 한국전기연구원, "수배전전력계통 접지계통과 인체 및 기기의 안전성에 관한 연구(기술논문자료)", 2006.11.
  2. C. F. Dalziel, "Electric shock hazard", IEEE Spectrum, pp. 42-50, February, 1972.
  3. IEEE Power Engineering Society, "IEEE Guide for Safety in AC Substation Grounding: IEEE Std. 80-2000", August, 2000.
  4. International Electrotechnical Commission, "IEC 60479-3 4th Edition, Effects of current on human beings - Part 3: Effects of currents passing through the body of livestock", July, 2005.
  5. International Electrotechnical Commission, "IEC 60479-1 4th Edition, Effects of current on human beings - Part 1: General aspects", July, 2005.
  6. 우동균, 이순, 박정욱, 김정훈, "IEC 규격 접지계통 방식에 서 고압계통의 1선 지락고장시 저압계통에서의 영향에 관한 연구", KIEE, 전력계통연구회 춘계학술대회, 2007. 05.
  7. Bo-Hyuk Ryu, Jung-Hoon Kim, et al, "Earth Resistivity Estimation Using Artificial Neural Network", The International Conference on Electrical Engineering, pp.469-472, July, 1998.