Acknowledgement
Supported by : The Agricultural Research and Planning Center (ARPC)
References
- Christjanson, P., K. Siimer, T. Pehk, and I. Lasn. 2002. Structural changes in urea-formaldehyde resins during storages, Holz als Roh-und Werkstoff, 60: 379-384. https://doi.org/10.1007/s00107-002-0326-9
- Chung, I. and G. E. Maciel. 1994. NMR study of the stabilities of urea-formaldehyde resin components toward hydrolytic treatments, J. Appl. Polym. Sci., 52: 1637-1651. https://doi.org/10.1002/app.1994.070521112
- Dunky, M. 1983. Urea-formaldehyde (UF) adhesive resins for wood. Int. J. Adhesion & Adhesives, 18: 95-107.
-
Ebdon, J. R. and P. E. Heaton. 1977. Characterization of urea-formaldehyde adducts and resins by
$^{13}C-n.m.r.$ spectroscopy, Polymer, 18: 971-974. https://doi.org/10.1016/0032-3861(77)90150-1 -
Ferg, E. F., A. Pizzi, and D. C. Levendis, 1993.
$^{13}C$ NMR analysis method for urea-formaldehyde resin strength and formaldehyde emission, J. Appl. Polym. Sci., 50: 907-915. https://doi.org/10.1002/app.1993.070500519 - Gu, J. Y., M. Higuchi, M. Morita, and C. Y. Hse. 1995. Synthetic conditions and chemical structures of urea-formaldehyde resins I. Properties of the resins synthesized three different procedures. Mokkuzai Gakkaishi, 41(12): 1115-1121.
- Gu, J. Y., M. Higuchi, M. Morita, and C. Y. Hse. 1996. Synthetic conditions and chemical structures of urea-formaldehyde resins II. Synthetic procedures involving a condensation step under strongly acidic conditions and the properties of the resins obtained. Mokkuzai Gakkaishi, 42(2): 149-156.
- Hse, C. Y., Z. Y. Xia, and B. Tomita. 1994. Effects of reaction pH on properties and performance of urea-formaldehyde resins. Holzforschung, 48(6): 527-534. https://doi.org/10.1515/hfsg.1994.48.6.527
- Kim, M. G. and L. W. Amos. 1990. Quantitative resins in relation to the formaldehyde emission levels, Ind. Eng. Chem., 29: 208-212. https://doi.org/10.1021/ie00098a010
-
Kim, M. G. 1999. Examination of selected synthesis parameters for typical wood adhesive-type urea-formaldehyde resins by
$^{13}$ C NMR spectroscopy I, J. Polym. Sci., Part A: Polym. Chem., 37: 995-1007. https://doi.org/10.1002/(SICI)1099-0518(19990401)37:7<995::AID-POLA14>3.0.CO;2-6 -
Kim, M. G. 2000. Examination of selected synthesis parameters for typical wood adhesive-type urea-formaldehyde resins by
$^{13}C$ NMR spectroscopy. II, J. Appl. Polym. Sci., 75: 1243-1254. https://doi.org/10.1002/(SICI)1097-4628(20000307)75:10<1243::AID-APP5>3.0.CO;2-F -
Kim, M. G. 2001. Examination of selected synthesis parameters for typical wood adhesive-type urea-formaldehyde resins by
$^{13}C$ NMR spectroscopy III, J. Appl. Polym. Sci., 80: 2800-2814. https://doi.org/10.1002/app.1397 -
Kim, M. G., H. Wan, B. Y. No, and W. L. Nieh. 2001. Examination of selected synthesis parameters for typical wood adhesive-type urea-formaldehyde resins by
$^{13}C$ NMR spectroscopy IV, J. Appl. Polym. Sci., 82: 1155-1169. https://doi.org/10.1002/app.1950 -
Kim, M. G., H. Wan, B. Y. No, S. M. Lee, and W. L. Nieh. 2003. Examination of selected synthesis parameters for typical wood adhesive-type urea-formaldehyde resins by
$^{13}C$ NMR spectroscopy IV, J. Appl. Polym. Sci., 89: 1896-1917. https://doi.org/10.1002/app.12367 - Marutzky, R. 1986. In: Wood Adhesives: Chemistry and Technology, Vol. 2. A. Pizzi, Ed., Marcel Dekker Inc., pp: 307-387.
- Meyer, C. B. 1979. Formaldehyde release from urea-formaldehyde systems, In: Proc. of the 13th International Symposium on Particleboard, Washington State University, Pullman, WS, USA, Ed. by T. M. Maloney, pp: 43-354.
- Myers, G. E. 1983. Formaldehyde emission from particleboard and plywood paneling: measurement, mechanism, and product standards. For. Prod. J., 33(5): 27-37.
- Myers, G. E. 1984. How mole ratio of UF resin affects formaldehyde emission and other properties: A literature critique. For. Prod. J., 34(5): 35-41.
- Myers, G. E. 1986. In: Formaldehyde Release from Wood Products, B. Meyer. B. A. K. Andrews, R. M. Reinhardt. Ed., American Chemical Society, pp: 8-14.
- Myers, G. E. and K. A. Koutsky. 1987. Procedure for measuring formaldehyde liberation from formaldehyde-based resins. For. Prod. J., 37(9): 56-60.
- Myers, G. E. and K. A. Koutsky. 1990. Formaldehyde liberation and cure behavior of urea-formaldehyde resins. Holzforschung, 44(2): 117-126. https://doi.org/10.1515/hfsg.1990.44.2.117
- Park, B.-D., Y. S. Kim, W. T. So, and K. P. Lim. 2002. Effects of reaction pH and hardener types on reactivity, properties, and performance of urea-formaldehyde (UF) resin, Mokchae Konghak, 30(3): 1-11.
- Pascault, J.-P., H. Sautereau, J. Verdu, and R. J. J. Williams. 2002. Thermosetting polymers, Marcel Dekker Inc., New York, USA.
- Pizzi, A., L. Lipschitz, and J. Valenzuela. 1994. Theory and practice of the preparation of low formaldehyde emission UF adhesives. Holzforschung, 48(3): 254-261. https://doi.org/10.1515/hfsg.1994.48.3.254
- Pizzi, A. 1983. Wood Adhesives: Chemistry and Technology. Marcel Dekker Inc., New York, USA. pp. 59-104.
- Pizzi, A. 1994. Advanced Wood Adhesives Technology. Marcel Dekker Inc., New York, pp. 19-66.
- Que, Z., T. Furuno, S. Katoh, and Y. Nishino. 2007. Effects of urea-formaldehyde resin mole ratio on the properties of particleboard, Building and Environment, 42: 1257-1263. https://doi.org/10.1016/j.buildenv.2005.11.028
- Soulard, C., C. Kamoun, and A. Pizzi. 1998. Uron and uron-urea-formaldehyde interior wood adhesives, Holzforschung Holzverwertung, 50(5): 89-94.
- Sellers Jr., T. 1999. In: International Contributions to Wood Adhesion Research, A. W. Christiansen, Ed., Pilato L. Forest Products Society, Madison, WI, USA. pp: 31-51.
- Tohmura, S., C. Y. Hse, and M. Higuchi. 2000. Formaldehyde emission and high-temperature stability of cured urea-formaldehyde resins. J. Wood Sci., 46: 303-309. https://doi.org/10.1007/BF00766221
-
Tomita, B. and S. Hatono. 1978. Urea-formaldehyde resins. III. Constitutional characterization by
$^{13}C$ fourier transform NMR spectroscopy. J. Appl. Polym. Sci., 16: 2509-2525. -
Valdez, D. 1996.
$^{13}C-NMR$ spectroscopy- A quantitative tool for wood adhesives, In: Proc. of Wood Adhesives 1995, Ed. by A.W. Christiansen and A. H. Conner, Forest Products Society, Madison, WI, USA, pp: 193-200.