참고문헌
- Waterhouse, R. B., 1992, 'Fretting Fatigue,' International materials reviews, Vol. 37, No. 2, pp. 77-97 https://doi.org/10.1179/imr.1992.37.1.77
- Horger, O. J., 1952, 'Influence of Fretting Corrosion on the Fatigue Strength of Fitted Members,' ASTM STP144, pp. 40-51
- Maxwell, W., Dudley, B. R., Cleary, A. B., Richards, J. and Shaw, J., 1967-68, 'Measures to Counter Fatigue Failure in Railway Axles,' Proc. Inst. Mech. Engrs, Vol. 182, Pt.1, No. 4, pp. 89-99
- Tanaka, S. I., Hatsuno, K., Mori, B. and Yaguchi, S., 1975, 'Fretting Corrosion and Fatigue Strength for Wheel-seat of Car-Axle - Test Results of Full Size Wheel Axle Testing Machine - (Report 1),' Railway Technical Research Report, No. 955 (In Japanese)
- Nishioka, K. and Komatshu, K., 1967, 'Study on the means for Improvement in Fatigue Strength of Press-fitted Axles,' Trans. Jpn. Soc. Mech. Eng., Vol. 33, No. 248, pp. 503-511 (In Japanese) https://doi.org/10.1299/kikai1938.33.503
- Nishioka, K. and Komatshu, K., 1970, 'Study on the means for Improvement in Fatigue Strength of Press-fitted Axles (Part2),' Trans. Jpn. Soc. Mech. Eng., Vol. 36, No. 291, pp. 1799-1804(In Japanese) https://doi.org/10.1299/kikai1938.36.1799
- Hirakawa, K., Toyama, K. and Kubota, M., 1998, 'The Analysis and Prevention of Failure in Railway Axles,' Int. J. Fatigue, Vol. 20, No. 2, pp.135-144 https://doi.org/10.1016/S0142-1123(97)00096-0
- Lonsdale, C. and Stone, D., 2004, 'North American Axle Failure Experience,' Proc. Instn Mech. Engrs Part F, J. Rail and Rapid Transit , Vol. 218, No. 4, pp. 293-298 https://doi.org/10.1243/0954409043125941
- Smith, R. A. and Hillmansen, S., 2004, 'A Brief Historical Overview of the Fatigue of Railway Axles,' Proc. Instn Mech. Engrs. Part F: J. Rail and Rapid Transit, Vol. 218 No. 4 pp. 267-278 https://doi.org/10.1243/0954409043125932
- Kubota, M., Niho, S., Sakae, C. and Kondo, Y., 2003, 'Effect of Understress on Fretting Fatigue Crack Initiation of Press-Fitted Axle,' JSME International Journal Series A, Vol. 46, No. 3, pp. 297-302 https://doi.org/10.1299/jsmea.46.297
- Lee, D. H., Kwon, S. J., Choi, J. B. and Kim,Y. J., 2007, 'Experimental Study on Fatigue Crack Initiation and Propagation due to Fretting Damage in Press-fitted Shaft,' Trans. of the KSME(A), Vol. 31, No. 6, pp. 701-709 (In Korean) https://doi.org/10.3795/KSME-A.2007.31.6.701
- Johansson, L., 1994, 'Numerical Simulation of Contact Pressure Evolution in Fretting,' Journal of Tribology, Vol. 116, pp. 247-254 https://doi.org/10.1115/1.2927205
- Podra, P. and Andersson, S., 1999, 'Simulating Sliding Wear with Finite Element Method,' Tribology International, Vol. 32, pp. 71-81 https://doi.org/10.1016/S0301-679X(99)00012-2
- Oqvist, M., 2001, 'Numerical Simulations of Mild Wear using Updated Geometry with Different Step Size Approaches,' Wear, Vol. 249, pp. 6-11 https://doi.org/10.1016/S0043-1648(00)00548-2
- McColl, I. R., Ding, J. and Leen, S. B., 2004, 'Finite Element Simulation and Experimental Validation of Fretting Wear,' Wear, Vol. 256, pp. 1114-1127 https://doi.org/10.1016/j.wear.2003.07.001
- Ding, J., Leen, S. B. and McColl, I. R., 2004, 'The Effect of Slip Regime on Fretting Wear-induced Stress Evolution,' International journal of fatigue, Vol. 26, pp. 521-531 https://doi.org/10.1016/j.ijfatigue.2003.09.001
- ABAQUS user's and theory manual, Version 6.4, 2003, Hibbit, Karlson & Sorensen, Inc.
- Lee, D. H., Kwon, S. J., Choi, J. B. and Kim, Y. J., 2006, 'Fatigue Life Evaluation of Press-fitted Shaft considering the Evolution of Contact Stress and Surface profile under Bending Load,' 9th International Fatigue Congress, CD-ROM ver.
- Ugural, A.C. and Fenster, S.K., 1995, Advanced strength and applied elasticity, Prentice-Hall, Inc.
- Stowers, I. F. and Rabinowicz, E., 1973, 'The Mechanism of Fretting Wear,' J. Lubrication Technol., Vol. 90, pp. 65-70
- Archard, J. F., 1953, 'Contact and Rubbing of Flat Surfaces,' J. Appl. Phys., Vol.24, pp.981-988 https://doi.org/10.1063/1.1721448
- Johnson, K. L., 1985, Contact Mechanics, Cambridge University Press, Cambridge, U.K.
- Allwood, J., 2005, 'Survey and Performance Assessment of Solution Methods for Elastic Rough Contact Problems,' Journal of Tribology, Vol. 127, pp. 10-23 https://doi.org/10.1115/1.1828073
- Kim, H.-K., Hills, D.A. and Nowell, D., 2000, 'Partial Slip between Contacting Cylinders under Transverse and Axial Shear,' International Journal of Mechanical Sciences, Vol. 42, pp. 199-212 https://doi.org/10.1016/S0020-7403(98)00127-1
- Press, W.H., Teukolsky, S.A., Vetterling, W.T. and Flannery, B.P., 1992, Numerical Recipes in Fortran 77, 2nd ed., Cambridge University Press
- Waterhouse, R. B., 1972, Fretting Corrosion, Pergamon Press, Oxford
- Yang, L.J., 2003, 'Wear Coefficient Equation for Aluminium-based Matrix Composites against Steel Disc,' Wear, Vol. 255, No. 1, pp. 579-592 https://doi.org/10.1016/S0043-1648(03)00191-1
피인용 문헌
- A Study on the Model of Thermal Plume Flow in the Forest Fire vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.007
- vol.12, pp.1, 2009, https://doi.org/10.5293/KFMA.2009.12.1.070
- Evaluation of Fatigue Crack Initiation Life in a Press-Fitted Shaft Considering the Fretting Wear vol.33, pp.10, 2009, https://doi.org/10.3795/KSME-A.2009.33.10.1091