Tribology and Lubricants

  • 제24권6호
  • /
  • Pages.326-331
  • /
  • 2008
  • /
  • 2713-8011(pISSN)
  • /
  • 2713-802X(eISSN)
한국트라이볼로지학회 (Korean Tribology Society)
권호 표지
DOI QR코드

DOI QR Code

진공척 흡착패드 형태에 따른 대면적 임프린팅 균일 접촉 향상 연구

Study on the Enhancement of the Uniform Contact Technology for Large Scale Imprinting with the Design of Vacuum Gripping Pad

  • 장시열 (국민대학교 기계자동차공학부)
  • Jang, Si-Youl (School of Mechanical and Automotive Engineering Kookmin University)
  • 발행 : 2008.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The contact surfaces between mold and target should be in parallel for a proper imprinting process. However, large size of contacting area makes it difficult for both mating surfaces (mold and target planes) to be in all uniform contact with the expected precision level in terms of thickness and position. This is caused by the waviness of mold and target although it is very small relative to the area scale. The gripping force for both mold and target by the vacuum chuck is other major effect to interrupt the uniform contact, which must be avoided in imprinting mechanism. In this study, the cause of non-conformal contact mechanism between mold and target is investigated with the consideration of deformation due to the vacuum gripping for the size $470{\times}370\;mm^2$ LCD panel.

키워드

참고문헌

  1. Guo, L. J., 'Recent Progress in Nanoimprint Technology and Its Applications', J. Phys. D:Appl. Phys., Vol. 37, R123-141, 2004 https://doi.org/10.1088/0022-3727/37/11/R01
  2. Schift, H., Bellini, S. and Gobrecht, J., 'Visualization of Mold Filling Stages in Thermal Nanoimprint by Using Pressure Gradients', J. Vac. Sci. Technol. B, Vol. 25, No. 6, pp. 2312-2316, 2006
  3. Heyderman, L. J., Schift, H., David, C., Gobrecht, J. and Schweizer, T., 'Flow Behavior of Thin Polymer Films used for Hot Embossing Lithography', Microelectronic Engineering, Vol. 54, pp. 229-245, 2000 https://doi.org/10.1016/S0167-9317(00)00414-7
  4. Hamrock, B. J., Fundamentals of Fluid Film Lubrication, McGraw-Hill, ISBN 0-07-025956-9
  5. Landis, S., Chaix, N., Gourgon, C., Perret, C. and Leveder, T., 'Stamp Design Effect on 100 nm Feature Size for 8 inch Nanoimprint Lithography', Nanotechnlogy, Vol. 17, pp. 2701-2709, 2006 https://doi.org/10.1088/0957-4484/17/10/043