DOI QR코드

DOI QR Code

A Study on the Heat Resistance of Light-Weight Polymer Concrete Composites

경량 폴리머 콘크리트 복합체의 내열성능에 관한 연구

  • Published : 2008.12.20

Abstract

In recent years, the light-weight aggregate has widely been used to reduce the weight of construction structures, and to achieve the thermal insulation of building structures. The purpose of this study is to evaluate the heat resistance of polymer concrete composites with light-weight aggregate made by binders as resin and cement with polymer dispersion. The light-weight polymer concrete composites are prepared with various conditions such as binder content, filler content, void-filling ratio, light-weight aggregate content and polymer-cement ratio, and tested for heat resistant test, and measured the weight reducing ratio, strengths and exhaustion content of gas such as CO, NO and $SO_2$. From the test results, the weight reducing ratio of light weight polymer concrete using UP binder after heat resistance test increase with an increase in the UP content irrespective of the filler content. The weight reducing ratio of polymer cement concrete is considerably smaller than that of UP concrete. In general, the strengths after heat resistance of polymer concrete composites are reduced about 40 to 65% compared with those before test. The exhausted quantity of CO, NO and $SO_2$ gases in polymer concrete composites is less than EPS(Expanded poly styrene). From the this study, it is confirmed that the many types gases discharge according to binder type of polymer concrete composites, its amount is controlled by selection of the binder type and mix proportions.

Keywords

References

  1. 노정식 외4인, 다공성 경량골재를 충전재로 활용한 샌드위치 패널 심재의 발열량 및 유해가스 배출특성, 한국콘크리트학회 봄 학술발표회 논문집, 제23권 제2호, pp.261-266, 2003.
  2. 소승영, 경량골재를 사용한 콘크리트 복합체의 단열성능에 관한 연구, 한국건축시공학회지 제4권 제3호, pp.93-100, 2004. https://doi.org/10.5345/JKIC.2004.4.3.093
  3. 양관섭, 스티로폴 혼합 경량콘크리트를 이용한 경량복합판넬의 성능 규명에 관한 실험적 연구, 대한건축학회, 춘계학술발표 논문집, pp.623-626, 1995.
  4. 이정국 외4인, 인공경량골재를 이용한 경량패널 심재의 열전도 특성, 한국콘크리트학회 봄 학술발표회 논문집, pp.131- 136, 2002.
  5. 한국건설기술연구원, 세콤(인공경량골재)을 이용한 공업화 판넬 및 저층주택시스템 개발 연구, pp.161-170, 1994.
  6. 한국소방안전협회, 플라스틱의 연소와 화재에 대한 연구, 소방2000년사, pp.108-119, 1994.
  7. ASTM D 635-91, Standard Method for Rate of Burning and/or Extend and Time of Burning of Self-Supporting Plastics in a Horizontal Position.
  8. Ohama, Y., Handbook of Polymer-Modified Concrete and Mortars Properties and Process Technology, Noyes Publications, 1995