참고문헌
- Nakamura, T. and Okano, Y. 1996 : Electro Magnetic Properties of Mn-Zn Ferrite, Proceeding of the ICF 7, pp. C1-101
- Udawatte, C. P. and Yanagisawa, K. 2001 : Fabrication of Low Porosity Indium Tin Oxide Ceramics in Air from Hydrothermally Prepared Powder, J. Am. Ceram. Soc., 84, pp. 251-253 https://doi.org/10.1111/j.1151-2916.2001.tb00645.x
- Yu, J. K., Kang, S. G., Chung, K. C., Han, J. S., and Kim, D. H. 2007 : Fabrication of Nano-Sized ITO Powder from Waste ITO Target by Spray Pyrolysis Process, Materials Transactions, 48, pp. 249-257 https://doi.org/10.2320/matertrans.48.249
- Yu, J. K., Kim, K. W., Kim, T. S., and Kim,, J. Y. 2005 : Fabrication of Nano-Sized Powders from Waste Solution by Spray Pyrolysis Process, Materials Transactions, 46, pp. 1695-1700 https://doi.org/10.2320/matertrans.46.1695
- Majumdar, D., Shefelbine, T. A., and Kodas, T. T. 1996 : Copper(I) Oxide Powder Generation by Spray Pyrolysis, J. Mater. Res., 11, pp. 861-2868
- Pluym, T. C., Lyons, S. W., Powell, Q. H., Gurav, A. S., and Kodas, T. T. 1993 : Palladium Metal and Palladium Particle Production by Spray Pyrolysis, Mat. Res. Bull., 28, pp. 369-376 https://doi.org/10.1016/0025-5408(93)90070-T
- Pluym, T. C. and Kodas, T. T. 1995 : Silver-Palladium Alloy Particle Production by Spray Pyrolysis, J. Mater. Res., 10, pp. 1661-1673 https://doi.org/10.1557/JMR.1995.1661
- Gurav, A., Kodas, T. T., Pluym, T. C., and Xiong, Y. 1993 : Aerosol Processing of Materials, Aerosol Sci. Technol., 19, pp. 411-452 https://doi.org/10.1080/02786829308959650
- Elmasry, M. A. A., Gaber, A., and Khater, E. M. H. 1997 : Preparation of Nickel Ferrite Using the Aerosolization Technique, Powder Technology, 90, pp. 165-168 https://doi.org/10.1016/S0032-5910(96)03220-2
- Messing, G. L., Zhang, S. C., and Jayanthi, G. V. 1993 : Ceramic Powder Synthesis by Spray Pyrolysis, J. Am. Ceram. Soc., 76, pp. 2707-2726 https://doi.org/10.1111/j.1151-2916.1993.tb04007.x
- Antony, A., Manoj, M., and Jayaraj, M. K. 2004 : Influence of target to Substrate Spacing on the Proterties of ITO Thin Films, Appl. Surf. Sci., 225, pp. 294-301 https://doi.org/10.1016/j.apsusc.2003.10.017
- Cruz, L. R., Legnani, C., Matoso, I. G., Ferreira, C. L., and Moutinho, H.R. 2004: Influence of Pressure and annealing on the Microstructural and Electro-Optical properties of RF Magnetron Spettered ITO Thin Films, Mat. Res. Bull., 39, pp 993-1003 https://doi.org/10.1016/j.materresbull.2004.03.008
- Hu, Y., Diao, X., Wang, C., Hao, W., and Wang, T. 2004 : Effects of Heat Treatment on Properties of ITO Films Prepared by RF Magnetron Sputtering, Vacuum, 75, pp. 183-188 https://doi.org/10.1016/j.vacuum.2004.01.081
- Maki, K., Komiya, N., and Suzuki, A. 2003 : Fabrication of Thin Films of ITO by Aerosol CVD, Thin Solid Films, 445, pp. 224-248 https://doi.org/10.1016/j.tsf.2003.08.021
- Tang, S., Yao, J., Chen, J., and Luo, J. 2003 : Preparation of Indium Tin Oxide(ITO) with a Single-Phase Structure, J. Mater. Process Technol., 137, pp. 82-85 https://doi.org/10.1016/S0924-0136(02)01072-5
- Utsumi, K., Matsunaga, O., and Takahata, T. 1998 : Low Resistivity ITO Film Prepared Using the Ultra High Density ITO Target, Thin Solid Films, 334, pp. 30-34 https://doi.org/10.1016/S0040-6090(98)01111-0
- Wu, W. F., Chiou, B. S. and Hsieh, S. T. 1994 : Effect of Sputtering Power on the Structural and Optical Properties of RF magnetron Sputtered ITO Films, Semicond. Sci. Technol., 9, pp. 1242-1249 https://doi.org/10.1088/0268-1242/9/6/014
- Yu, J. K., Kang, S. G., Kim, J. B., Kim, J. Y., Han, J. S., Yoo, J. W., Lee, S. W., and Ahn, Z. S. 2006 : Nano-Sized Indium Oxide Powder Synthesized by Spray Pyrolysis Process, Materials Transactions, 47, pp. 1838-1846 https://doi.org/10.2320/matertrans.47.1838