DOI QR코드

DOI QR Code

Anisotropy of Wetting of Molten Fe on α-Al2O3 Single Crystal

  • Cho, Seung-Youn (Department of Materials Science & Engineering, Korea University) ;
  • Lee, Joon-Ho (Department of Materials Science & Engineering, Korea University)
  • Published : 2008.01.31

Abstract

The wetting behavior of molten Fe on ${\alpha}-Al_2O_3$ single crystals with three different crystallographic orientations, $R(01\bar{1}2),\;A(11\bar{2}0),\;and\;C(0001)$, was investigated using the sessile drop method under a 10%$H_2-Ar$ atmosphere at 1873 K. It was found that the differences in the contact angle of the three differently oriented ${\alpha}-Al_2O_3$ single crystals were not significant (within $5^{\circ}$, which corresponded to the changes in the work of adhesion of $157mJ/m^2$) due to the surface reconstruction.

Keywords

References

  1. W. D. Callister Jr, Materials Science and Engineering, 6th ed., p.426-602, John Wiley & Sons, Inc., New York, (2003)
  2. Vikner P. DEA report, LTPCM, INP Grenoble, France, (1993), in N. Eustathopoulos, M.G. Nicholos and B.Drevet, Wettablility at high temperatures, p. 205, Elsevier Science, Oxford, England, (1999)
  3. P. Shen, H. Fujii, T. Matsumoto and K. Nogi, J. Mater. Sci., 40, 2329 (2005) https://doi.org/10.1007/s10853-005-1954-3
  4. P. D. Ownby, K. Wen, K. Li and A. Weirauch Jr., J. Am.Ceram. Soc., 74, 1275 (1991) https://doi.org/10.1111/j.1151-2916.1991.tb04097.x
  5. P. Shen, H. Fujii, T. Matsumoto and K. Nogi, Acta. Mater., 52, 887 (2004) https://doi.org/10.1016/j.actamat.2003.10.024
  6. J. Lee, H. Ishimura and T. Tanaka, Scripta Mater., 54, 1369 (2006) https://doi.org/10.1016/j.scriptamat.2005.12.006
  7. J. Lee, A. Kiyose, S. Nakatsuka, M. Nakamoto and T.Tanaka, ISIJ Int., 44, 1793 (2004) https://doi.org/10.2355/isijinternational.44.1793
  8. N. Eustathopoulos and B. Drevet, Mater. Sci. Eng., A249, 176 (1998) https://doi.org/10.1016/S0921-5093(98)00521-8
  9. Y.-R. Luo and J. A. Kerr in D. R. Lide, editor-in-chief., CRC handbook of chemistry and physics, 86th ed., CRCPress p. 9-54-59 (2005-2006)
  10. K. Rzyman, Z. Moser, A.P. Miodownik, L. Kaufman, R.E. Watson and M. Weinert, Calphad, 24, 309 (2000) https://doi.org/10.1016/S0364-5916(01)00007-4
  11. J. H. Choi, D. Y. Kim, B. J. Hockey, S. M. Wiederhorn, C. A. Handwerker, J. E. Blendell, W. C. Carter and A. R. Roosen, J. Am. Ceram. Soc., 80, 62 (1997) https://doi.org/10.1111/j.1151-2916.1997.tb02791.x
  12. M. Kitayama and A. Glaeser, J. Am. Ceram. Soc., 85, 611 (2002) https://doi.org/10.1111/j.1151-2916.2002.tb00140.x
  13. I. Manassidis and M. J. Gillan, J. Am. Ceram. Soc., 77, 335 (1994) https://doi.org/10.1111/j.1151-2916.1994.tb07000.x