References
- J. Lemaitre, 2001, Materials behavior models, Academic Press, San Diego
- J. Lemaitre, J. L. Chaboche, 1994, Mechanics of solid materials, Oxford University Press, Cambridge
- E. Krempl, 1979, An experimental study of roomtemperature rate sensitivity, creep and relaxation of AISI Type 304 stainless steel, J. Mech. Phys. Solids, Vol. 27, pp. 363-375 https://doi.org/10.1016/0022-5096(79)90020-6
-
P. S. Majors, E. Krempl, 1994, The isotropic viscoplasticity theory based on overstress applied to the modeling of modified 9Cr-1Mo steel at
$538^{\circ}C$ , Mat. Sci. and Eng., Vol. 186, pp. 23-34 https://doi.org/10.1016/0921-5093(94)90302-6 - M. Yaguchi, Y. Takahashi, 1999, Unified constitutive model for modified 9Cr-1Mo steel incorporating dynamic strain aging effect, JSME Int. J (Series A), Vol. 42, pp. 1-10 https://doi.org/10.1299/jsmea.42.1
- M. Yaguchi, M. Yamamoto, T. Ogata, 2002, A viscoplastic constitutive model for nickel-base superalloy, part 2: modeling under anisothermal conditions, Int. J. Plasticity, Vol. 18, pp. 1111-1131 https://doi.org/10.1016/S0749-6419(01)00030-4
- C. M. Bordonaro, E. Krempl, 1992, Effect of strain rate on the deformation and relaxation behavior of 6/6 Nylon at room temperature, Poly. Eng. And Sci., Vol. 32, pp. 1066-1072 https://doi.org/10.1002/pen.760321604
- E. Krempl, F. Khan, 2003, Rate (time)-dependent deformation behavior: an overview of some properties of metals and solid polymers, Int. J. Plasticity, Vol. 19, pp. 1069-1095 https://doi.org/10.1016/S0749-6419(03)00002-0
- A. Khan, B. Farrokh, 2006, Thermo-mechanical response of nylon 101 under uniaxial and multiaxial loadings: Part I, Experimental results over wide ranges of temperatures and strain rates, Int. J. Plasticity, Vol. 22, pp. 1506-1529 https://doi.org/10.1016/j.ijplas.2005.10.001
- E. Krempl, T. Nakamura, 1998, The influence of the equilibrium stress growth law formulation on the modeling of recently observed relaxation behaviors, JSME Int. J. (Series A), Vol. 41, pp. 103-111 https://doi.org/10.1299/jsmea.41.103
- E. Krempl, 2001, Relaxation behavior and modeling, Int. J. Plasticity, Vol. 17, pp. 1419-1436 https://doi.org/10.1016/S0749-6419(00)00092-9
- J. L. Chaboche, D. Nouaihas, 1989, A unified constitutive model for cyclic viscoplasticity and its applications to various stainless steel, J. Eng. Mat. Tech., Vol. 111, pp. 424-430 https://doi.org/10.1115/1.3226490
- N. Ohno, M. Abdel-Karim, 2000, Uniaxial ratcheting of 316FR steel at room temperature-Part II: constitutive modeling and simulation, J. Eng. Mat. Tech., Vol. 122, pp. 35-41 https://doi.org/10.1115/1.482762
- O. U. Colak, E. Krempl, 2003, Modeling of uniaxial and biaxial ratcheting behavior of 1026 Carbon steel using the simplified viscoplasticity theory based on overstress (VBO), Acta Mech., Vol. 160, pp. 27-44 https://doi.org/10.1007/s00707-002-0966-1
- K. Ho, 2000, Modeling of positive, negative and zero rate sensitivity by using the viscoplasticity theory based on overstyress (VBO), Mechanics of Time-Dependent Mat., Vol. 4, pp. 21-42 https://doi.org/10.1023/A:1009850608336
- K. Ho, 2001, Modeling of nonlinear rate sensitivity by using an overstress model, Comp. Model. Eng. Sci., Vol. 2, pp. 351-364
- K. Ho, 2004, A study on strain rate sensitivity by unified viscoplasticity, Trans. of Materials Processing, Vol. 13, pp. 600-607 https://doi.org/10.5228/KSPP.2004.13.7.600
- K. Ho, 2006, Unified constitutive equations of viscoplastic deformation: development and capabilities, JSME Int. J. (Series A), Vol. 49, pp. 138-146 https://doi.org/10.1299/jsmea.49.138
- K. Ho, 2007, The rate dependent deformation behavior of AISI type 304 stainless steel at room temperature, Trans. of Materials Processing, Vol. 16, pp. 101-106 https://doi.org/10.5228/KSPP.2007.16.2.101
- K. Ho, 2008, Effect of the rate dependence of nonlinear kinematic hardening rule on relaxation behavior, Int. J. Solids structures, Vol. 45, pp. 821-839 https://doi.org/10.1016/j.ijsolstr.2007.09.003