DOI QR코드

DOI QR Code

Source Localization Technique for Metallic Impact Source by Using Phase Delay between Different Type Sensors

다종 센서간 위상 차이를 이용한 충격 위치추정 기법

  • 최경식 (충남대학교 전자전파정보통신공학과) ;
  • 최영철 (한국원자력연구원) ;
  • 박진호 (한국원자력연구원) ;
  • 김환우 (충남대학교 전자전파정보통신공학과)
  • Published : 2008.11.20

Abstract

In a nuclear power plant, loose part monitoring and its diagnostic technique is one of the major issues for ensuring the structural integrity of the reactor system. Typically, accelerometers are mounted on the surface of a reactor vessel to localize impact location cavsed by the impact of metallic substances on the reactor system. However, in some cases, the number of the accelerometers is not enough to estimate the impact location precisely. In such a case, one of alternative plan is to utilize another type sensors that can measure the vibration of the reactor structure even though the measuring frequency ranges are different from each others. The AE sensors installed on the reactor structure can be utilized as additional sensors for loose part monitoring. In this paper, we proposed a new method to estimate impact location by using both accelerometer signal and AE signal, simultaneously. The feasibility of the proposed method is verified by an experiment. The experimental results demonstrate that we can enhance the reliability and precision of the loose part monitoring.

Keywords

References

  1. Lubin, B. T., 1988, 'Analysis of Internals Vibration Monitoring and Loose Part Monitoring Systems Data Related to the St. Lucie 1 Thermal Shield Failure', Reacator Noise- SWORN VI, Porgress in Nuclear Energy, Vol. 21, No. 117-26
  2. Mayo, C. W., et al., 1988, 'Loose-Part Monitoring System Improvements', EPRI NP-5743 Project 2642-1 Final Report
  3. Rhee, I. K., et al., 1994, 'Development of Loose Parts Signal Location Estimating Technique in Hgh Pressurized Structure (Research Report KAERI/CM-102/94, 1994)
  4. Park, J.-H. and Kim, Y.-H., 2006, 'Impact Source Localization on an Elastic Plate in a Noisy Environment', Measurement and Science Technology, Vol. 17, pp. 2757-2766 https://doi.org/10.1088/0957-0233/17/10/030
  5. Choi, Y.-C., Park, J.-H., Yoon, D.-B. and Park, K.-B., 2006, 'Loose-part Mass Estimation Using Time-frequency Analysis', Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 16, No. 8, pp. 872-878 https://doi.org/10.5050/KSNVN.2006.16.8.872
  6. Cohen, L., 1995, 'Time-frequency Distribution', Prentice Hall PTR, Engle-wood Cliffs, New Jersey, 1995)
  7. Randall, R. B., 1987, 'Frequency Analysis', 3rd Edition, B&K, pp. 19-31, pp. 58-62
  8. Cheong, Y.-M., Kim, J.-H. and Jung, H.-K., 2000, 'Dynamic Elastic Constants of Weld HAZ of SA 508 CL. 3 Steel Using Resonant Ultrasound Spectroscopy', 15th World Conference on Nondestructive Testing
  9. Cremer, L. and Heckl, M., 1998, Structuralborne Sound, Spring-verlag Berlin Heidelberg New York London Paris Toyko, p. 101
  10. Viktorov, I. A., 1967, 'Rayleigh and Lamb Waves', Plenum Press, pp. 67-102
  11. Donald, R., 1987, 'Mechanics of Underwater Noise', Peninsula Publishing Los Altos, California, p. 159
  12. Julius, S. B. and Allan, G. P., 2000, 'Random Data, Analysis and Measurement Procedures', 3rd Edition, John Wiley & Sons, pp. 109-159

Cited by

  1. Development of Novel Impact Paint Sensor by Using Graphene based Smart Nano Composite vol.24, pp.3, 2014, https://doi.org/10.5050/KSNVE.2013.24.3.247