Journal of the Society of Naval Architects of Korea (대한조선학회논문집)

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

Surface Modeling of Forebody's Hull Form Using Form Parameters and Fair-Skinning

형상 파라메터와 평활화 스키닝을 이용한 선수 선형 곡면 모델링

  • Published : 2008.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper deals with a new geometrical surface modeling method of forebody's hull form which is fully defined by form parameters. The complex hull form in the forebody can be modeled by the combination of three parts: bare hull, bulbous bow and blending part which connects a bare hull and a bulbous bow. All these subdomain parts are characterized by each own form parameters and constructed with simple surface model. For this, we need only 2-dimensional hull form data and then the form parameters are calculated automatically from these data. Finally, the smooth hull form surfaces are generated by parametric design and fair-skinning. In the practical point of view, we show that this new method can be useful and efficient modeling tool by applying to the hull form surface modeling of Panamax container's forebody.

Keywords

References

  1. Ahn, D., 1994, A Study on Ship Hull Form Generation using Form Parameters and its Fairing, Master' s thesis, Pusan National University
  2. Creutz, G., 1977, Kurven- und Flachen-entwurf aus Formparametern mit Hilfe von B- splines, (in German), PhD thesis, Technical University Berlin
  3. Fog, N.G., 1984, "Creative Definition and Fairing of Ship Hulls using B-spline Surface," Computer Aided Design, Vol. 16, No. 4, pp. 225-229 https://doi.org/10.1016/0010-4485(84)90007-1
  4. Harries, S., 1998, Parametric Design and Hydrodynamic Optimization of Ship Hull Forms, PhD thesis, Technical University Berlin, Mensch & Buch Verlag
  5. Kim, H.C., 2004, Parametric Design of Ship Hull Forms with a Complex Multiple Domain Surface Topology, PhD thesis, Techinical University Berlin, Mensch & Buch Verlag
  6. Kim, H.C., Lee, K.S. and Kim, S.Y, 1998, " Hull Form Representation using a Hybrid Curve Approximation," The Society of Naval Architects of korea, Vol. 35, 4, pp. 118-119
  7. Kim, H.C. and Nowacki, H., 2005, " Parametric Design of Complex Hull Forms," Journal of Ship and Ocean Technology, Vol. 9, No. 1, pp. 47-63
  8. Kim, S.Y. and Jang, Y.H, 1991, " The Gener-ation & Representation of the Preliminary Hull Form using B-spline," The Society of Naval Architects of Korea, Vol. 41, No. 3, pp. 67-73
  9. Kim, S.Y., Kim, H.C., Baek, J.M. and Lee, C.R, 1997, " A Study about Hull Form Generation of High-Speed Coastal Fishing Vessel using Irrational Function and Hull Form Characteristic Curves," The Society of Naval Architects of Korea, Vol. 34, No. 3, pp. 96-103
  10. Reed, A.M. and Nowacki, H., 1972, " Inter-active Creation of Fair Ship Lines, Lecture Notes an Intensive Short Course at The University of Michigan, Section 3, Ann Arbor, MI, USA
  11. Rogers, D.F. and Satterfield, S.G., 1980, " B-spline Surfaces for Ship Hull Design," Computer Graphics https://doi.org/10.1145/965105.807494
  12. Taylor, D.W., 1905, " On Ship's Forms Der-ived by Formulae, " SNAME Transactions, pp. 243-270
  13. Zhou, C. and Liu, D., 1985, " The Use of Bezier Surface in the Design of a Ship Hull Surface," Computer Applications in the Automation of Shipyard Operation and Ship Design V

Cited by

  1. On the Volumetric Balanced Variation of Ship Forms vol.27, pp.2, 2013, https://doi.org/10.5574/KSOE.2013.27.2.001
  2. Practical Hull Form Design using VOB vol.30, pp.4, 2016, https://doi.org/10.5574/KSOE.2016.30.4.235