대한조선학회논문집 (Journal of the Society of Naval Architects of Korea)

  • 제45권6호
  • /
  • Pages.590-600
  • /
  • 2008
  • /
  • 1225-1143(pISSN)
  • /
  • 2287-7355(eISSN)
대한조선학회 (The Society of Naval Architects of Korea)
권호 표지
DOI QR코드

DOI QR Code

전역 최적화기법과 파라메트릭 변환함수를 이용한 선형 최적화

Hull Form Optimization using Parametric Modification Functions and Global Optimization

  • Kim, Hee-Jung (Dept. of Naval Architecture and Ocean Engineering, Pusan National Univ.) ;
  • Chun, Ho-Hwan (Dept. of Naval Architecture and Ocean Engineering, Pusan National Univ.) ;
  • An, Nam-Hyun (Division of Ship building & Marine Engineering, Koje College)
  • 발행 : 2008.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

This paper concerns the development of a designer friendly hull form parameterization and its coupling with advanced global optimization algorithms. As optimization algorithms, we choose the Partial Swarm Optimization(PSO) recently introduced to solve global optimization problems. Most general-purpose optimization softwares used in industrial applications use gradient-based algorithms, mainly due to their convergence properties and computational efficiency when a relatively few number of variables are considered. However, local optimizers have difficulties with local minima and non-connected feasible regions. Because of the increase of computer power and of the development of efficient Global Optimization (GO) methods, in recent years nongradient-based algorithms have attracted much attention. Furthermore, GO methods provide several advantages over local approaches. In the paper, the derivative-based SQP and the GO approach PSO are compared with their relative performances in solving some typical ship design optimization problem focusing on their effectiveness and efficiency.

키워드

참고문헌

  1. Choi, H.J., Kim, H.J., Chun, H.H. and Jung, K.H., 2006, "Hull Form Optimization by Modification Function of Bell-shaped Distribution," Journal of the Society of Naval Architects of Korea, Vol. 43, No. 5, pp. 550-559 https://doi.org/10.3744/SNAK.2006.43.5.550
  2. Hino, T., 2005, Proc. of CFD Workshop Tokyo 2005, Tokyo, Japan
  3. Jacquin, E., Derbanne, Q., bellevre, D., Cordier, S. and Alessandrini, B., 2004, "Hull Form Optimization Using a Free Surface RANSE Solver," 25th Symposium on Naval Hydrodynamics
  4. Kennedy, J. and Eberhare, R., 1995, "Particle Swarm Optimization," Proceedings, IEEE International Conference on Neural Networks, Perth, Australia, IEEE Service Center, Piscataway, Vol. 4, pp. 1942-1948 https://doi.org/10.1109/ICNN.1995.488968
  5. Kim, H.J. Choi, H.J. and Chun, H. H., 2007, "A Practical Hull form Optimization Method using the Parametric Modification Function," Journal of the Society of Naval Architects of Korea, Vol. 44, No. 5, pp. 370-378 https://doi.org/10.3744/SNAK.2007.44.5.542
  6. Kim, W.J., Kim, D.H., Van, S.H., 2002, "Computational Study on Turbulent Flows around Modern Tanker Hull Forms," International Journal for Numerical Methods in Fluids, Vol. 38, pp. 377-406 https://doi.org/10.1002/fld.230
  7. Lowe, T.W. and Steel, J., 2003, "Conceptual Hull Design Using a Genetic Algorithm." Journal of Ship Resarch, Vol. 47, No. 3, pp. 222-236
  8. Na, S.S., 2005, "Development of a Multi-objective Function Method Based on Pareto Optimal Point," Journal of the Society of Naval Architects of Korea, Vol. 42, No. 2, pp. 175-182 https://doi.org/10.3744/SNAK.2005.42.2.175
  9. Pareto, V., 1896, Cours dEComonie Politique, F.Rouge, Lausanne
  10. Parsopoulos, K.E. and Vrahatis, M.N. 2002, "Recent Approaches to Global Optimization Problems through Particle Swarm Optimization," Natural Computing, Vol. 1, pp. 235-306 https://doi.org/10.1023/A:1016568309421
  11. Peri, D. and Campana, E.F., 2005, "High-Fidelity Models and Multiobjective Global Optimization Algorithms in Simulation-Based Design," Journal of Ship Research, Vol. 49, No. 3, pp. 159-175
  12. Pinto, A., Peri, D. and Campana, E.F., 2004, "Global Optimization Algorithms in Naval Hydrodynamics," Ship Technology Research, Vol. 51, No. 3, pp. 123-133 https://doi.org/10.1179/str.2004.51.3.004
  13. Pinto, A., Peri, D. and Campana, E.F., 2007, "Multiobjective Optimization of a Containership Using Deterministic Particle Swam Optimization," Journal of Ship Research, Vol. 51, No. 3, pp. 217-228
  14. Seo, K.C., Atlar, M., Kim H.J. Chun H.H. and Kang D.S., 2007, "Efficient Propulsion of a Container Ship Using the Inclined Keel Concept," Journal of the Society of Naval Architects of Korea, Vol. 44, No. 4, pp. 379-388 https://doi.org/10.3744/SNAK.2007.44.4.379
  15. Vanderplaats, G.N., 1984, Numerical Optimization Techniques for Engineering Design, McGrow-Hill, New York
  16. Van, S.H., Kim, W.J., Kim, D.H. and Yim, G.T., 1988, "Development of Computational System 'WAVIS' for Hull Form Evaluation," Proceedings of the Annual Spring Meeting, SNAK, pp. 199-202
  17. Van, S.H., Kim, W.J. and Kim, D.H., 2000, "Experimental Investigation of Local Flow around DRISO 3600TEU Container Ship Model in Towing Tank," Journal of the Society of Naval Architects of Korea, Vol. 37, No. 3, pp. 1-10

피인용 문헌

  1. The Design Optimization of a Flow Control Fin Using CFD vol.49, pp.2, 2012, https://doi.org/10.3744/SNAK.2012.49.2.174