The Transactions of The Korean Institute of Electrical Engineers (전기학회논문지)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

On the Effects of Electric Noise due to the Slits in the PCB Power-Distribution Network with the Differential-Mode Signaling using a Rigorous Modal Analysis Method

정확한 모드해석방법을 이용한 차동모드 급전을 가지는 PCB 전력공급회로에서의 슬릿에 의한 전기잡음의 영향 연구

  • 강승택 (인천대학교 정보통신공학과)
  • Published : 2007.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

This study investigates the performances of the signaling techniques including differential signals for the power-distribution network(PDN)s with and without the slit, using a rigorous evaluation method 'Modal Analysis', validated by being compared to the FDTD simulation up to 5 GHz.

Keywords

References

  1. T. Okoshi, Planar Circuits for Microwaves and Lightwaves, Berlin, Germany: Springer-Verlag, 1985
  2. M. Hampe and S. Dickmann, 'The impact of decoupling capacitors on the impedance of rectangular PCB power-bus structures,' in Proc. $16^{th}$ EMC Zurich, Switzerland, 2005, pp.251-256
  3. S. Kahng, 'Study on Differential Signaling with the Decoupling Capacitor in the Rectangular Power-Bus Structure,' in Proceeding of Applied Computational Electromagnetics Symposium 2006 Miami, Florida, 2006, CEM-for-EMC pp. 20-24
  4. Z. Wang, et al 'Convergence Acceleration and Accurcy Improvement in Power Bus Impedance Calculation with a Fast Algorithm using the Cavity Modes,' in IEEE Trans. on EMC, vol. 47, pp. 2-9, Feb., 2005