Journal of Ship and Ocean Technology

대한조선학회 (The Society of Naval Architects of Korea)
권호 표지

Optimization of the Propeller Steady Performance Behind Wake Field

  • Lee, Wang-Soo (Department of Naval Architecture and Ocean Engineering, Chungnam National Univ.) ;
  • Choi, Young-Dal (STX Shipbuilding Co., Ltd,) ;
  • Kim, Gun-Do (Maritime and Ocean Engineering Research Institute, KORDI) ;
  • Moon, Il-Sung (Maritime and Ocean Engineering Research Institute, KORDI) ;
  • Lee, Chang-Sup (Department of Naval Architecture and Ocean Engineering, Chungnam National Univ.)
  • 발행 : 2007.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

With the sharp increase of the oil price, the issue of the energy saving requires even higher propulsive efficiency of the propellers. Traditionally the propellers have been designed with the criteria such as that of Lerbs optimum based on the lifting line theory and the empirical formulae of Lerbs and van Manen giving relations of the wake pitch with the wake non-uniformity. With the aid of the high speed computer, it is now possible to apply the time-consuming iterative approaches for the solution of the lifting surface problems. In this paper we formulate the variational problem to optimize the efficiency of the propeller operating in the given ship wake using the lifting surface method. The variational formulation relating the spanwise circulation distribution with the propulsive efficiency to be maximized is however non-linear in circulation distribution functions, thus the iterative method is applied to the quasi-linearized equations. The blade shape design also requires the iterative procedures, because the shape of the blade which is represented by the lifting surface is unknown a priori. The numerical code was validated with the DTNSRDC propeller 4119 which is well-known to be optimum in uniform inflow condition. In addition existing (well-designed) commercial propellers were selected and compared with the results of the open water tests and the self-propulsion tests.

키워드

참고문헌

  1. Andersen, P., J. Friesch, J. J. Kappel, L. Lundegaard and G. Patience. 2005. Development of a marine propeller with nonplanar lifting surfaces. Marine Technology, 42, 3, 144-158
  2. Coney, W. B. 1992. Optimum circulation distributions for a class of marine propulsors. Journal of ship research, 36, 3, 210-222
  3. Greeley, D. S. and J. E. Kerwin. 1982. Numerical Methods for Propeller Design and Analysis in Steady Flow. 8 Trans. of SNAME, 90, 415-453
  4. Jessup, S. D. 1989. An experimental investigation of viscous aspects of propeller blade flow. Ph.D. Thesis, The Catholic Univ. of America
  5. Kerwin, J. E. 1961. The solution of propeller lifting surface problems by vortex lattice methods. Department of ocean engineering, MIT
  6. Kerwin, J. E. 1995. Hydrofoils and propellers. Department of ocean engineering, MIT
  7. Kerwin, J. E. and C. S. Lee. 1978. Prediction of steady and unsteady marine propeller performance by numerical lifting surface theory. Trans. of SNAME, 86, 218-258
  8. Kim, J. H., S. K. Kim and C. S. Lee. 1995. Design of propeller blade shape by vortex distribution method. Proc. of 6-th International symposium on practical design of ships and mobile units, 17-22, 1, 207-218
  9. Lee, C. S., Y. G. Kim and J. W. Ahn. 1991. Interaction between a propeller and the stern shear flow. Korea-Japan joint workshop on hydrodynamics in ship design, 16-29
  10. Lerbs, H. W. 1952. Moderately loaded propellers with a finite number of blades and an arbitrary distribution of circulation. Trans. of SNAME, 60, 73-123
  11. Olsen, A. S. 2001. Optimisation of propellers using the vortex-lattice method. Ph.D. Thesis, Technical Univ. of Denmark