한국군사과학기술학회지 (Journal of the Korea Institute of Military Science and Technology)

  • 제10권1호
  • /
  • Pages.144-149
  • /
  • 2007
  • /
  • 1598-9127(pISSN)
  • /
  • 2636-0640(eISSN)
한국군사과학기술학회 (The Korea Institute of Military Science and Technology)
권호 표지

초기하중을 받는 로켓모타 케이스 나사체결부의 구조해석

Structural Analysis for Thread Joint Part of Rocket Motor Case Applied Pre-load

  • 발행 : 2007.03.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Behaviour of a thread joint of a rocket motor case show complex structural characteristics. Pre-torque must be applied to the threads to prevent the loosening of the interface from the additional pressure load. During the pressurization of the rocket motor case, the jointing face may be opened if the pre-torque were not set properly or the structure may be failed if the local concentrated stress exceeds the strength of the material. In this paper, the structural behaviour of a thread joint of a rocket motor case were analyzed by the finite element method and the results were compared to the experimental ones. A method to set a pre-torque for a thread joint were proposed to ensure the structural safety.

키워드

참고문헌

  1. J. H. Bickford, "An introduction to the design and behavior of bolted joints", Marcel Dekker, Inc, 1995
  2. A. Yamamoto, "The theory and computation of thread connection", Youkendo, Yokyo, pp.39-54, 1980
  3. I. R. Grosse, L. D. Nitchell, "Non-linear axial stiffness characteristic of axisy㎜etric bolted joint", Trans. ASME J. Mechanical Design 112, pp.442-449, 1990 https://doi.org/10.1115/1.2912628
  4. T. F. Lehnohoff, W. E. Wistehuff, "Non-linear effects on the stress and deformations of bolted joints", Trans. ASME J. Mechnical Design, 118, pp.54-58, 1996
  5. J. J. Chen, Y. S. Shih, "A study of the helical effect on the thread connection by three dimensional finite element analysis", Nuclear Engineering and Design 191, pp.109-116, 1999 https://doi.org/10.1016/S0029-5493(99)00134-X
  6. 2005 MSC. MARC Topic Seminar, "Contact analysis with MSC. Marc", April 2005
  7. 2005 MSC. MARC User's Guide Ch.2.2 "Thermo-Mechanical analysis of cylinder head joint with quadratic contact", pp.2.2.13-2.2.18
  8. 2005 MSC. Marc User's Manual Vol. A, "Theory and user information: chap. 9 boundary conditions, overclosure tying", pp.628-631
  9. R. L. Roehrich, "Torquing Stresses in Lubricated Bolts", Machine Design, pp.171-175, 1967. 6