References
- Chung, Y. L. and Spiewak, S. A., 1994, 'A model of high performance dynamometer,' ASME Trans. Journal of Engineering for Industry, Vol. 116, pp. 279-288 https://doi.org/10.1115/1.2901943
- Tounsi, N. and Otho, A., 2000, 'Dynamic cutting force measuring,' Int. J. of Machine Tools & Manufacture, Vol. 40, pp. 1157-1170 https://doi.org/10.1016/S0890-6955(99)00117-0
- Spiewak, S. A., 1995, 'Acceleration based indirect force measurement in metal cutting processes,' Int. J. of Machine Tools & Manufacture, Vol. 35, No. 1, pp. 1-17 https://doi.org/10.1016/0890-6955(95)80005-0
- Kim, T. Y. and Kim, J. W., 1996, 'Adaptive cutting for ce control for a machining center by using indirect cutting force measurements,' Int. J. of Machine Tools & Manufacture, Vol. 36, No. 8, pp. 925-937 https://doi.org/10.1016/0890-6955(96)00097-1
- Jeong, Y. H. and Cho, D. W., 2002, 'Estimating cutting force from rotating and stationary feed motor currents on a milling machine,' Int. J. of Machine Tools & Manufacture, Vol. 42, pp. 1559-1566 https://doi.org/10.1016/S0890-6955(02)00082-2
- Auchet, S., Chevrier, P., Lacour, M. and Lipinski, P., 2004, 'A new method of cutting force measurement based on command voltages of active electro-magnetic bearings,' Int. J. of Machine Tools & Manufacture, Vol. 44, pp. 1441-1449 https://doi.org/10.1016/j.ijmachtools.2004.05.009
- Kim, I. H., Jang, D. Y., Kim, W. J. and Han, D. C., 2001, 'In-process sensing of tool wear and process states using a cylindrical displacement sensor in hard turning,' Proc. of the Institution of Mechanical Engineers, Part B: J. of Engineering Manufacture, Vol. 215, No. 12, pp. 1673-1682 https://doi.org/10.1243/0954405011519501
- Kim, I. H. and Jang, D. Y., 2003, 'Cutting vibration monitoring using a spindle displacement sensor in turning,' Proc. of DETC'03, ASME, Chicago, Illinois, USA
- Albrecht, A., Park, S. S., Altintas, Y. and Pritschow, G., 2005, 'High frequency bandwidth cutting force measurement in milling using capacitance displacement sensors,' Int. J. of Machine Tools & Manufacture, Vol. 45, pp. 993-1008 https://doi.org/10.1016/j.ijmachtools.2004.11.028
- Smith, P. T., Vallance, R. R. and Marsh, E. R., 2005, 'Correcting capacitive displacement measurements in metrology applicatoins with cylindrical artifacts,' Precision Engineering, Vol. 29, pp. 324-335 https://doi.org/10.1016/j.precisioneng.2004.11.010
- Jun, M. B., Ozdoganlar, O. B., DeVor, R. E., Kappor, S. G., Kirchheim, A. and Schaffner, G., 2002, 'Evaluation of a spindle-based force sensor for monitoring and fault diagnosis of machining operations,' Int. J. of Machine Tools & Manufacture, Vol. 42, pp. 741-751 https://doi.org/10.1016/S0890-6955(01)00156-0
- Li, H. and Shin, Y. C., 2004, 'Analysis of bearing configuration effects on high speed spindles using an integrated dynamic thermo-mechanical spindle model,' Int. J. of Machine Tools & Manufacture, Vol. 44, pp. 347-364 https://doi.org/10.1016/j.ijmachtools.2003.10.011
- Chang, H. K., Kim, J. H., Kim, I. H., Jang, D. Y. and Han, D. C., 2007, 'In-process surface roughness prediction using displacement signals from spindle motion,' Int. J. of Machine Tools & Manufacture, Vol. 47, pp. 1021-1026 https://doi.org/10.1016/j.ijmachtools.2006.07.004
- Mann, B. P., Young, K. A., Schmitz, T. L. and Dilley, D. N., 2005, 'Simultaneous stability and surface location error predictions in milling,' ASME Tran. Journal of Manufacturing Science and Engineering, Vol. 127, pp. 446-453 https://doi.org/10.1115/1.1948394