한국공작기계학회논문집 (Transactions of the Korean Society of Machine Tool Engineers)

한국생산제조학회 (The Korean Society of Manufacturing Technology Engineers)
권호 표지

마이크로 엔드밀링에서 가공깊이에 따른 가공변질층의 특성

The Characteristics of Damaged Layer According to Depth of Cut in Micro Endmilling

  • 이종환 (부산대학교 대학원 기계공학부) ;
  • 권동희 (부산대학교 대학원 기계공학부) ;
  • 박진효 (부산대학교 대학원 기계공학부) ;
  • 김병민 (부산대학교 대학원 기계공학부) ;
  • 정융호 (부산대학교 대학원 기계공학부) ;
  • 강명창 (부산대학교 하이브리드소재 솔루션 국가핵심연구센터(NCRC)) ;
  • 이성용 (한국폴리텍VII 부산대학 컴퓨터응용기계과) ;
  • 김정석 (부산대학교 기계공학부/정밀정형 및 금형가공연구소)
  • 발행 : 2007.10.15
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The study on damaged layer is necessary for machinability improvement in micro machining. The damaged layer in metal cutting is derived from plastic deformation and transformation of metal structure. The damaged layer affects micro mold life and micro machine parts. In this study, the damaged layer of micro machined surface of copper is evaluated according to various machining condition. The damaged layer structure and metallurgical characteristics are measured by optical microscope, and evaluated by cutting forces and surface roughness. The scale of this damaged layer depends on cutting process parameters and machining environments. By experimental results, depth of damaged layer was increased with increasing of cutting depth, also the damaged layer is less occurred in down-milling compared to up-milling during micro endmilling operation.

키워드

참고문헌

  1. Kwon, D. H., Lee, J. H., Hwang, I. O., Kang, M. C. and Kim, J. S., 2006, 'A Study on the Microscopic Precision of Machined Surface according to Variation of Machining Environments in High Speed Endmilling,' Transactions of the Korean Society of Machine Tool Engineers, Vol. 15, No. 6, pp. 50-57
  2. Sokovic, M. and Mijanovic, K., 2001, 'Ecological Aspects of the Cutting Fluids and its Influence on Quantifiable Parameters of the Cutting Processes,' Journal of Materials Processing Technology, Vol. 109, pp. 181-189 https://doi.org/10.1016/S0924-0136(00)00794-9
  3. Matsumoto, Y. and Barash, M. M., 1984, 'Residual Stress in the Machined Surface of Hardened SteelHigh Speed Machining,' Presented at the Winter Annual Meeting of the ASME, pp. 193-204
  4. Jeon, S. K., Shin, Y. J., Kim, B. H., Kim, H. Y. and Jeon, B. H., 2003, 'Micro-Machining of Glasses Using Chemical-Assisted Ultrasonic Machining,' Transactions of the Korean Society of Mechanical Engineers, Vol. 27, No. 12, pp. 2085-2091 https://doi.org/10.3795/KSME-A.2003.27.12.2085
  5. Zhang, Q. H., Zhang, J. H., Jia, Z. X. and Sun, J. L., 1999, 'Material Removal Rate Analysis in the Ultrasonic Machining of Engineering Ceramics,' Journal of Materials Processing Technology, Vol. 88, pp. 180-184 https://doi.org/10.1016/S0924-0136(98)00400-2
  6. Chu, T. H. and Wallbank, J., 1998, 'Determination of the Temperature of a Machined Surface,' Journal of Manufacturing Science and Engineering ASME, Vol. 120, pp. 259-263 https://doi.org/10.1115/1.2830122
  7. Kang, J. H., 2000, 'Environmentally Conscious Machining Technology and Machine Tool,' Journal of the Korean Society of Machine Tool Engineers, Vol. 9, No. 1, pp. 9-19
  8. Chou, Y. K. and Evans, C. J., 1999, 'White Layers and Thermal Modeling of Hard Turned Surfaces,' International Journal of Machine Tools & Manufacture, Vol. 39, pp. 1863-1881 https://doi.org/10.1016/S0890-6955(99)00036-X
  9. Mohri, N., Saito, N. and Tsunekawa, Y., 1993, 'Metal Surface Modification by Electrical Discharge Machining with Composite Electrode,' Annals of the CIRP, Vol. 42, pp. 219-222 https://doi.org/10.1016/S0007-8506(07)62429-9
  10. Park, J. and Jeong, H., 2005, 'A Study on the Fabrication of Micro Groove on Si Wafer Using Chemical Mechanical Machining,' Journal of Mechanical Science and Technology, Vol. 19, No. 11, pp. 2096-2104 https://doi.org/10.1007/BF02916504
  11. Rahman, M. and Kumar, A. S., 2001, 'Experimental Evaluation on the Effect of Minimal Quantities of Lubricant in Milling,' J. of MTM, Vol. 42, pp. 539-547
  12. Song, C. S. and Kim, J. H., 2005, 'Cutting Characteristics of Dry Turning Using Compressed Air,' Transactions of the Korean Society of Machine Tool Engineers, Vol. 14, No. 1, pp. 8-14
  13. Kwon, D. H., Hwang, I. O., Kang, M. C., Kim, J. H., Kim, J. S. and Ahn, J. H., 2006, 'Development of the Micro Tool Dynamometer for Micro Machining,' KSPE Spring Annual Meeting, pp. 217-218
  14. Lee, J. W., Kwon, D. H., Kim, J. S., Kim, D. W., Kang, M. C. and Lim, B. K., 2007, 'Damaged Layer Characteristics in Micro-Endmilling of Copper Using an Ultrahigh-Speed Air Spindle,' Journal of Mechanical Science and Technology, Vol. 21, No. 2, pp. 244-250 https://doi.org/10.1007/BF02916285